A new bilayer wound dressing structure has been developed by depositing amorphous polylactic acid (PLA) nanofibers on a hydrogel layer composed of gelatin (GE), hyaluronic acid (HA) and zinc oxide (ZnO) particles for its antibacterial properties. The choice of solvent was crucial to optimize electrospinability, productivity, and nanofibers morphology. This study investigated the impact of polymer concentration and electrospinning parameters, such as applied voltage and distance from tip to collector, on nanofibers morphology. To improve the healing process, Ibuprofen (IBU) was encapsulated in PLA nanofibers at a concentration of 5 wt% due to its anti‐inflammatory properties. Differential scanning calorimeter (DSC) analysis confirmed the amorphous nature of PLA, while TGA confirmed the presence of IBU and almost complete evaporation of solvent during the electrospinning process. Scanning electron microscopy (SEM) characterization demonstrated that nanofibers fabricated from PLA/IBU solutions electrospun in acetone at concentrations of 10 wt% and 12.5 wt%, using an applied voltage of 40 kV and a tip‐to‐collector distance of 15 cm, yielded fibers with the most favorable morphological features for the target application. The resulting nanofibers exhibited consistent nanoscale diameters and a smooth, homogeneous surface topology, indicating that these electrospinning parameters represent optimal conditions for achieving high‐quality fiber formation. Antimicrobial analyses were conducted to demonstrate the bilayer dressing's effectiveness in inhibiting or eliminating bacterial growth. These tests aimed to assess the potential of this new dressing as a protective barrier against infection, highlighting its relevance for wound care applications.
Textiles have been widely used as medical implant materials because they combine favorable mechanical properties, unique flexibility, porosity and biocompatibility. These textiles can be tailored for a wide range of clinical applications, including hernia meshes, vascular grafts, stent grafts or heart valves. However, at implantation time, textiles undergo the Foreign Body Reaction (FBR) mechanism, which needs to be controlled in order to ensure the long-term performances of these implants. Actually, the natural porosity and fibrous arrangement of woven textiles in particular, used when stability and strength are required, tend to induce exaggerated tissue ingrowth. This may prevent the implants from remaining flexible, which is particularly critical for hernia meshes or heart valve leaflets. Conversely, non-woven textiles tend to limit FBR but lack strength and stability under cyclic loading. In this study, the rationale is to create a mechanically interlocked hybrid textile combining a woven and a non-woven layer, presenting the hairiness of non-woven on both sides towards FBR limitation, while being as strong as woven. For that purpose, a woven polyethylene terephthalate (PET) fabric layer and a PET spun-bond non-woven layer were assembled using an embroidery-based needle punching process. The influence of the needle-punching stitch density on the physical and mechanical properties of the hybrid textile as well as on its behavior in contact with mesenchymal stem cells (MSCs) was investigated. Results bring out that the assembling process provides strong cohesion between the textile layers. When the stitch density is increased, the fibrous construction becomes more compact, less thick and less stiff with a slight loss in strength. Regarding cell interaction, MSC metabolic activity increased over time for all textile conditions, with the hybrid textiles exhibiting an intermediate response between the woven and non-woven textiles. These findings bring out that embroidery-based needle punching provides an effective approach for manufacturing strong and flexible hybrid textiles expected to limit exaggerated FBR when used as implant.