In-home healthcare services based on the Internet-of-Things (IoT) have great business potential; however, a comprehensive platform is still missing. In this paper, an intelligent home-based platform, the iHome Health-IoT, is proposed and implemented. In particular, the platform involves an open-platform-based intelligent medicine box (iMedBox) with enhanced connectivity and interchangeability for the integration of devices and services; intelligent pharmaceutical packaging (iMedPack) with communication capability enabled by passive radio-frequency identification (RFID) and actuation capability enabled by functional materials; and a flexible and wearable bio-medical sensor device (Bio-Patch) enabled by the state-of-the-art inkjet printing technology and system-on-chip. The proposed platform seamlessly fuses IoT devices (e.g., wearable sensors and intelligent medicine packages) with in-home healthcare services (e.g., telemedicine) for an improved user experience and service efficiency. The feasibility of the implemented iHome Health-IoT platform has been proven in field trials.

Epidermal electronic systems (EESs) are skin-like electronic systems, which can be used to measure several physiological parameters from the skin. This paper presents materials and a simple, straightforward fabrication process for skin-conformable inkjet-printed temperature sensors. Epidermal temperature sensors are already presented in some studies, but they are mainly fabricated using traditional photolithography processes. These traditional fabrication routes have several processing steps and they create a substantial amount of material waste. Hence utilizing printing processes, the EES may become attractive for disposable systems by decreasing the manufacturing costs and reducing the wasted materials. In this study, the sensors are fabricated with inkjet-printed graphene/PEDOT:PSS ink and the printing is done on top of a skin-conformable polyurethane plaster (adhesive bandage). Sensor characterization was conducted both in inert and ambient atmosphere and the graphene/PEDOT:PSS temperature sensors (thermistors) were able reach higher than 0.06% per degree Celsius sensitivity in an optimal environment exhibiting negative temperature dependence.

This article focuses on the fabrication and characterization of stretchable interconnects for wearable electronics applications. Interconnects were screen-printed with a stretchable silver-polymer composite ink on 50-μm thick thermoplastic polyurethane. The initial sheet resistances of the manufactured interconnects were an average of 36.2 mΩ/◽, and half the manufactured samples withstood single strains of up to 74%. The strain proportionality of resistance is discussed, and a regression model is introduced. Cycling strain increased resistance. However, the resistances here were almost fully reversible, and this recovery was time-dependent. Normalized resistances to 10%, 15%, and 20% cyclic strains stabilized at 1.3, 1.4, and 1.7. We also tested the validity of our model for radio-frequency applications through characterization of a stretchable radio-frequency identification tag.

In this contribution we discuss the sintering of an inkjet-printed copper nanoparticle ink based on electrical performance and microstructure analysis. Laser and intense pulsed light (IPL) sintering are employed in order to compare the different techniques and their feasibility for electronics manufacturing. A conductivity of more than 20% of that of bulk copper material has been obtained with both sintering methods. Laser and IPL sintering techniques are considered to be complementary techniques and are highly suitable in different application fields.