Purple corn (Zea mays L.) is a rich source of anthocyanins extensively used in the food and cosmetic industry. Producing concentrates and colorants from purple corn generates large amounts of phytochemical-rich byproducts that are not upcycled (spent purple corn cob (sPCC) and spent purple corn grains (sPCG)), which retain significant levels of phytochemicals despite undergoing extensive extraction. sPCC is a fibrous, anthocyanin-rich material, while sPCG contains higher protein and lipid levels. This study aimed to reutilize these byproducts by optimizing extraction yields from sPCC and sPCG using a response surface methodology (RSM) based on phenolic and flavonoid content of the extract. Total phenolics, expressed in mg gallic acid equivalents (GAE) per 100 g of sample, ranged from 1107.5 to 4883.8 in sPCC and from 138.0 to 867.8 in sPCG. Total flavonoids, expressed as mg of quercetin-equivalents per 100 g of sample, ranged from 130.0 to 361.7 in sPCC and from 13.8 to 137.2 in sPCG. Based on phenolic content, optimal conditions were 216.8 min, 80 % aqueous ethanol, and 60 °C for sPCC and 240 min, 80 % aqueous ethanol, and 60 °C for sPCG. Based on flavonoid content, optimal conditions were 60 min, 69.5 % aqueous ethanol, and 30 °C for sPCC and 216.5 min, 80 % aqueous ethanol, and 60 °C for sPCG. Overall, spent purple corn byproducts proved to be valuable sources of phytochemicals, particularly phenolics and flavonoids, successfully recovered under optimized extraction conditions, highlighting their potential for functional ingredients and natural colorants.
La creciente demanda de materiales para la construcción, la búsqueda de alternativas sostenibles y amigables con el medio ambiente, y la nueva visión hacia una economía circular han hecho que cada vez se usen residuos agrícolas para la obtención de nuevos materiales con valor agregado. La presente investigación buscó elaborar y caracterizar ladrillos fabricados con diferentes concentraciones de adición de ceniza de cascarilla de arroz (5%, 10% y 15%). Se determinó por gravimetría el contenido promedio de óxido de silicio (SiO2) en la ceniza de cascarilla de arroz obtenida para luego elaborar los ladrillos según las concentraciones establecidas. Los ladrillos obtenidos fueron evaluados mediante las pruebas de compresión, absorción y alabeo según los parámetros establecidos en la NTP-399.61 para ladrillos de concreto. Los resultados arrojaron que el contenido promedio de SiO2 en la ceniza de cascarilla de arroz fue de 79,08%, así mismo, en las pruebas de compresión y absorción se observó que la concentración de ceniza influyó sobre la fuerza de compresión y el porcentaje de absorción de agua, mostrando en la primera prueba que el Tto (5%) era similar estadísticamente (p<0,05) al testigo con 24,6 MPa. De igual manera, en la segunda prueba arrojó el valor más bajo en comparación con el testigo, con 5,24% de absorción de agua. Como conclusión podemos decir que la sustitución de 5% de ceniza de cascarilla de arroz mostró tener potencial para la elaboración de ladrillos de cemento según los parámetros establecidos en la NTP-399.601.
Revaluation of Criollo mango peels for use in the food industry would generate an environmentally sustainable impact on the circular economy. This research seeks evaluation temperature (T) and time (t) of mango peel pre-cooking (PMP) and effect of drying on the concentration functional compounds (CFC). For this, a 22-type experimental design with a central point was implemented to evaluate the effects temperature (80, 89, and 98 °C) and time (5, 12.5, and 20 min) on the PMP the Criollo variety. The analyses performed included quantification total polyphenols (TP), total flavonoids (TF), antioxidant capacity (AC), and vitamin C (VC). This study, the effect conventional drying at three temperatures (45, 55, and 65 °C) was evaluated over 10 hours. The main findings study indicated that, after optimization to maximize CFC, the best values were obtained PMP of temperature and time, with 80 °C and 5 minutes, respectively. During the drying process, it was observed that, under the temperatures examined, there was no significant change in most of the samples. This study serves as a starting point for reevaluating Criollo mango skins through implementation circular economy and their application in products such as cookies made with mango peel.
Municipal sewage sludge contains carbon and mineral constituents that can be recovered as water-treatment materials. This study compared four silicon-rich carbons prepared under different carbon dioxide activation and nitric-acid modification conditions to examine whether material properties ranked arsenic(V) and lead(II) removal consistently. Pre-contact characterisation combined spectroscopy, microscopy, elemental analysis, nitrogen sorption and surface-charge assessment. Separate model-groundwater solutions containing each contaminant were treated in triplicate at pH 6.0, 6.5 and 7.0. Mean removal ranged from 47.8 to 76.2% for As(V) and from 68.8 to 96.3% for Pb(II). Two-factor analyses detected no significant material, pH or interaction effects at the 5% level. Averaged across the three pH levels, M3 had the highest numerical As(V) removal (71.7%), whereas M1 had the highest numerical Pb(II) removal (92.2%). A separate low-concentration test with M3 reported final concentrations of 0.0080 ± 0.0006 mg L−1 As(V) and 0.0041 ± 0.0004 mg L−1 Pb(II). Fifth-cycle removal remained above 80% for both contaminants, with 88.2% dry sorbent mass recovery after five cycles. The different material rankings indicate that total surface area alone does not describe performance across both contaminants. Further analytical, leaching and natural-water assessments are needed before application to drinking-water treatment.
The phenomenon of mass transfer during osmotic dehydration and convective drying of tomato halves (Solanum lycopersicum L.) was carried out 1) using sucrose and salt as solutes; and 2) by fitting the Peleg and Page equations to the experimental data. The fruit was cut into halves and its seeds and placenta were removed. It was osmotically dehydrated with solutions: 10.8% 18% and 30% 50%, (w/v), of salt and sucrose respectively at a temperature of 25 °C. Subsequently, the resulting samples were subjected to a convective drying process by forced air in a tunnel at temperatures of: 50; 70 and 90ºC. Determining the weight loss of the samples, the solids gain, obtaining parameters from the experimental models of Peleg and Page with correlation levels of R2 ≥0.9894 for the proposed models.
5 January 2026 in Revista Brasileira de Meio Ambiente
The present study sought to determine the potential for bioremediation of arsenic in groundwater using the fungus S. luteus. Water samples were taken from two wells in the district of Pacora - Lambayeque, and analysed to determine their As, pH and E.C. content; for bioremediation, we worked with the waste of S. luteus, selected, washed and dehydrated at 50°C/24 hours and 60°C/16 hours, then ground, the obtained from each dehydrated, was applied taking into account the factors of 1, 6 and 12 hours of agitation and doses of 0.6, 1.5 and 2.4 g/300 ml, in triplicate and at 75 RPM; the treated water was filtered and its As concentration was evaluated, and the sludge was analysed by HPLC-UV, to determine its amino acid composition. The results showed that the dose that yielded the highest levels of bioremediation was 0.6g/300 ml with values of 90.63 and 83.33% in the well ‘Estadio’ and ‘Pueblo Viejo’, respectively, also, it was evidenced that the pH and conductivity influenced this process, on the other hand, it was identified that the S. luteus has a rich and functionally active amino acid profile (18 amino acids), with glutamic acid (2.08 g/100 g), leucine (1.90 g/100 g) and aspartic acid (1.51 g/100 g) standing out. It is concluded that the depletion of S. luteus has great potential as a bioremediation agent for As in groundwater, although the final values obtained exceeded the MPLs for As in water established by the WHO.