Rustam Buzyakov

Dr. Rustam Buzyakov

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2021 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
AМAli Меkhtiyev
Ali Меkhtiyev
IBIossif Breido
Iossif Breido
RBRustam Buzyakov
Rustam Buzyakov
YNYelena Neshina
Yelena Neshina
AAAliya Alkina
Aliya Alkina
The study was devoted to solving the issue of creating new electric heating devices that can be used in autonomous heat supply systems. The issues were resolved by developing an original low-pressure electric steam heater. The study was aimed at improving the efficiency of heat supply systems for buildings and structures. Given the current trends in the global striving for energy conservation, it cannot be fully realized without the introduction of high-tech and low-energy-consuming electrical equipment. As a result of theoretical studies of a heat pipe with an electric heater, a design of an electrovacuum heating element has been developed. The low-pressure electric steam heater can be used in heat supply systems of autonomous users. Thermal energy transfer is currently accompanied by substantial energy losses since the heat carrier has to pass considerable distances. Switching of the facility to the heating plant is impossible in some cases because of technical problems or significant material costs for laying pipelines. As a result of the study, the dependence of heating the heat pipe at various volumes of the heat carrier and mass of the pipe itself was established. When a certain mass is reached, the temperature of the heating surfaces can reach 70 °C which is considered acceptable. The experimental data obtained have made it possible to develop an electric heater of new generation with a fundamentally new design of the heating element. It combines the efficiency of an electric spiral and comfortable warmth from a traditional radiator. This heater is an explosion and fire-safe and can be integrated into the Smart Home system

10 October 2023 in Вестник КазАТК
Verified
Journal Article
Open access
PDF file
RBRustam Buzyakov
Rustam Buzyakov
AMAli Mehtiev
Ali Mehtiev
Статья посвящена исследованию электровакуумного нагревателя и созданного на его основе парового электрообогревателя низкого давления. Паровой электрообогреватель низкого давления может быть основой автономной системы отопления нового поколения. Созданы опытные образцы парового электрообогревателя низкого давления с автоматической системой управления режимами его работы. Мощность образцов составила 600, 800, 1000 Вт. Надежность электровакуумного нагревателя была проверена опытным путем. Паровой электрообогреватель низкого давления сочетает в себе эффективность электрической спирали и комфортность тепла, полученного от традиционного радиатора отопления центральной системы теплоснабжения, при этом он не имеет недостатков масляных электрических радиаторов и является надежным, пожаробезопасным электрообогревателем.

29 December 2025 in Eurasian Physical Technical Journal
Verified
Journal Article
Open access
RBRustam Buzyakov
Rustam Buzyakov
AМAli Меkhtiyev
Ali Меkhtiyev
YNYe.G. Neshina
Ye.G. Neshina
AAAliya Alkina
Aliya Alkina
ABArkadiy Bilichenko
Arkadiy Bilichenko
The article deals with developing and analyzing a heat pipe of a low-pressure steam electric heater intended for autonomous heating systems. The object of the study is two types of heating elements: a tubular electric heater with a nichrome spiral and an induction heater. Experimental analysis methods have been used to evaluate the heating characteristics, the temperature distribution and the energy efficiency. It has been established that the induction heater provides a higher heating rate and uniform temperature distribution, while the tubular heater is characterized by stable operation and economy. The obtained results allow proposing the ways to optimize the design of the electric heater to increase its efficiency and reliability. The findings confirm the practical potential of using the devices under study in various types of heating systems.

23 September 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
RBRustam Buzyakov
Rustam Buzyakov
AМAli Меkhtiyev
Ali Меkhtiyev
YNYelena Neshina
Yelena Neshina
VKValeriy Kalytka
Valeriy Kalytka
OAOxana Aldoshina
Oxana Aldoshina
This paper examines the electric–vacuum heat pipe (EVHP) as the main heat-transfer component of a low-pressure steam electric heater (LPSEH). The EVHP is interpreted as a wickless, closed, gravity-driven two-phase thermosiphon, in which active electrical power is supplied to the lower evaporation zone, while heat transfer to the outer surface is achieved through the evaporation of the working fluid, steam circulation, condensation and the gravitational return of the liquid phase. The aim of the study is to develop a theoretical and experimental description of the electrothermal regime of the EVHP and to establish the constraints governing the transition from a single smooth tube to a sectional instrument module. The proposed system distinguishes between the electrical input power, the heat generated in the evaporation zone, and the useful heat transferred from the external surface. An external convective–radiative balance was performed, along with numerical modeling in COMSOL Multiphysics and an experimental study on laboratory sections of the LPSEH. It was shown that a single smooth tube with a diameter of 32 mm and a length of 340 mm, at a surface temperature of 90 °C, provides a calculated heat-transfer rate of 16.3–52.8 W for the considered range of convection coefficients and emissivity (24.1–31.8 W under the baseline scenarios at h = 6 W/(m2·K)). In contrast, removal of 80 W of heat requires an equivalent heat-transfer area of 0.052–0.168 m2 (0.086–0.114 m2 under the baseline scenarios). Based on data from the main experimental program MP01–MP40, a regression model of the local temperature regime has been derived, relating the overheating in the upper zone of the section to the specific electrothermal load, the volume of the working fluid and the specific structural mass parameter. For the extended model, R2fit = 0.911, R2adj = 0.903, R2LOO = 0.887, MAELOO = 7.23 °C, and RMSELOO = 8.69 °C were obtained. Additional comparison showed the temperature sensitivity of the mode to the initial residual pressure and to the method of electrical heat supply. The obtained results justify the need for a developed surface, ribbing and sectional regulation of LPSEH. External heat transfer is estimated parametrically in the range of convection coefficient h and emissivity ε, which forms the design range of thermal power and the required surface area. The numerical model is verified by grid independence and energy balance, while the experimental program confirms the main electrothermal trends of the EVHP.