Thermal comfort is a key determinant of human health and requires adaptive responses to dynamic environments. Here, we report a temperature-adaptive textile enabled by a tensile stress mismatch-driven poly(N-isopropylacrylamide) (PNIPAM) actuator operating within a human-friendly temperature range of 18–38 °C. A pre-stretched polyurethane core fiber integrated within a PNIPAM sheath in a noncoaxial configuration induces programmable bending through tensile-stress mismatch between elastic recovery and hydrogel swelling. Unlike conventional bilayer hydrogel actuators based on differential swelling between laminated layers, this pre-stretching strategy amplifies structural deformation through elastic restoring stress. When extended to a two-dimensional textile architecture, this strategy enables reversible, dynamic pore modulation with an approximately 400% increase in pore area. This study provides a promising platform for smart adaptive textiles, wearable healthcare, and soft robotics.
1 September 2026 in Journal of the Korean Institute of Electrical and Electronic Material Engineers
Ocean waves are not only a sustainable renewable energy source but also provide valuable information for monitoring marine environments and natural hazards. In this study, we developed a CNT/SEBS-based self-powered marine monitoring sensor utilizing a mechano-electrochemical mechanism, enabling simultaneous ultralow-frequency wave sensing and electrical energy harvesting. The developed sensor generated an open-circuit voltage of up to 60 mV and a short-circuit current of 80 μA/cm2 without an external power source by exploiting variations in electrical double-layer capacitance induced by changes in the electrode–electrolyte interface. The capacitance increased from 0.1 μF to 2.4 μF with increasing immersion area, demonstrating the effectiveness of the proposed sensing mechanism. Furthermore, the CNT/SEBS bilayer exhibited high electrical conductivity together with excellent stretchability and flexibility, maintaining stable electrical responses under repeated water-level fluctuations. The proposed mechano-electrochemical self-powered sensor provides a promising platform for next-generation autonomous marine monitoring systems and sustainable blue-energy harvesting technologies.
The commercialization of proton/anion-exchange membrane water electrolyzers (PEMWEs/AEMWEs) requires the development of high-performance and durable anodes. Herein, pore-controlled electrodes (C@PCEs) that incorporate carbon nanotube sheets with square pores and catalyst nanoparticles are designed. Ir and NiFe catalysts, which promote the oxygen evolution reaction under acidic and alkaline conditions, respectively, are applied in PEMWEs and AEMWEs. The C@PCEs have higher catalytic activities than the corresponding conventional densely packed electrodes (C@DPEs). Additionally, the PEMWEs and AEMWEs with C@PCEs exhibit improved performance with reduced overpotentials compared to those with C@DPEs. This enhancement in performance is ascribed to the pore structure of the C@PCEs, in which the electrocatalyst is well dispersed without agglomeration, thus increasing the electrochemical surface area. In addition, the highly conductive and porous carbon nanotube framework promotes electron and mass transfer. These results demonstrate that the C@PCE design is promising for anodes in both PEMWEs and AEMWEs.