Oktay Ozkan

Dr. Oktay Ozkan


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 July 2017 in Water
Verified
Journal Article
Open access
PDF file
İUİbrahim Uyanık
İbrahim Uyanık
OOOktay Ozkan
Oktay Ozkan
İKİsmail Koyuncu
İsmail Koyuncu
Reuse of water is necessary in Organized Industrial Zones (OIZ) due to excessive use of groundwater in semi-arid Turkey. Membrane treatment of the OIZ wastewater treatment plant (WWTP) effluents should be explored for new treatment options. In this study, three different UF membranes with variable molecular weight cutoff (MWCO) values (4, 10, and 250 kDa) were used to treat the effluent of an OIZ WWTP at laboratory scale. Six different nanofiltration (NF) and reverse osmosis (RO) membranes were used for the effluent of UF membranes to evaluate the difference in the membrane filtration performance and the water quality. Effluent electrical conductivity (EC) values of NF membranes were 1.77 ± 0.17, 3.73 ± 0.27, and 4.20 ± 0.23 ms/cm for NF (NF90, NF270, and TM610) membranes, respectively while they were 0.83 ± 0.47, 1.17 ± 0.47, and 1.13 ± 0.57 ms/cm for RO (XLE, AD90, and BW30) membranes, respectively. Scanning electron microscope (SEM), energy dispersive X-ray Spectroscopy (EDS), and confocal laser scanning microscope (CLSM) images showed severe biofouling in UF 4 kDa and UF 10 kDa membranes whereas UF 250 kDa membrane showed larger metal precipitates and little bacterial fouling. The results indicated that OIZ WWTP effluent could be reused as irrigation water according to Turkish regulations with UF 250 kDa and RO-XLE membranes, effectively.

20 September 2011 in Environmental Monitoring and Assessment
Verified
Journal Article
Closed access
PDF file
OOOktay Ozkan
Oktay Ozkan
MOMerve Oğuz
Merve Oğuz
ÖÖÖzgür Özdemir
Özgür Özdemir

4 August 2017 in Water
Verified
Journal Article
Open access
PDF file
OOOktay Ozkan
Oktay Ozkan
İUİbrahim Uyanık
İbrahim Uyanık
Organized industrial zone (OIZ) wastewater is a mixed wastewater that is contributed by both municipal use and from different industrial sectors. Since MBR has advantages over conventional treatment plants, membrane types and fouling become the most important parameters in the treatment of this kind of wastewater. In this study, six different membrane types were used to find the most suitable membrane with the least resistivity to fouling. Three different microfiltration (MF) and ultrafiltration (UF) membranes were operated to estimate their (i) membrane, (ii) cake, (iii) pore, and (iv) total resistances. The highest total resistance was observed in a polyethersulfone (PES) membrane (3.8 × 1010 m−1), while the lowest one was a UF polyvinylidene fluoride (PVDF) membrane with approximately 20 times lower resistance than the highest one. PVDF membranes showed lower total resistances than PES membranes. An MF or a 250 kDa UF membrane could be operated long-term in a membrane bioreactor with the least fouling potential.

1 July 2010 in Water Science & Technology
Verified
Journal Article
Closed access
OOOktay Ozkan
Oktay Ozkan
HMH. Mıhçıokur
H. Mıhçıokur
ŞAŞükrü Taner AZGIN
Şükrü Taner AZGIN
ÖÖÖ. Özdemir
Ö. Özdemir
Wastewater from a medical-waste sterilisation plant (MWSP) contains unique pollutants and requires on-site treatment to prevent contamination of the municipal sewage system and receiving water bodies. Therefore, to meet the prescribed discharge standards and comply with the legal regulations, pre-treatment must be applied to MWSP wastewater. In this study, the capabilities of coagulation-flocculation processes were investigated for MWSP wastewater treatment. Processes using ferric chloride, ferrous sulfate and aluminium sulfate as coagulants were characterised. During the coagulation experiments, seven different coagulant dosages and four different pH values were evaluated to determine the optimum coagulant dosage and pH value. The highest removal efficiency of chemical oxygen demand (COD) was obtained using 300 mg/L of ferric chloride at pH 10. A COD removal of about 60% as well as considerable reductions in the amounts of suspended solids, nitrogen and phosphorus were realised.

18 August 2011 in Environmental Progress & Sustainable Energy
Verified
Journal Article
Closed access
PDF file
OOOktay Ozkan
Oktay Ozkan
MOMerve Oguz
Merve Oguz
FVFatma Varinli
Fatma Varinli