Analysis consisting of numerical simulations along with lab experiments of interaction effects between key parameters on the electromagnetic force based on response surface methodology (RSM) has been also proposed to optimize the design of high-speed solenoid valve (HSV) and improve its performance. Numerical simulation model of HSV has been developed in Ansoft Maxwell environment and its accuracy has been validated through lab experiments. Effect of change of core structure, coil structure, armature structure, working air gap, and drive current on the electromagnetic force of HSV has been analyzed through simulation model and influence rules of various parameters on the electromagnetic force have been established. The response surface model of the electromagnetic force has been utilized to analyze the interaction effect between major parameters. It has been concluded that six interaction factors including working air gap with armature radius, drive current with armature thickness, coil turns with side pole radius, armature thickness with its radius, armature thickness with side pole radius, and armature radius with side pole radius have significant influence on the electromagnetic force. Optimal match values between coil turns and side pole radius; armature thickness and side pole radius; and armature radius and side pole radius have also been determined.
2 June 2016 in International Journal of Automotive Technology
A novel formula easily applied with high precision is proposed in this paper to fit the B‐H curve of soft magnetic materials, and it is validated by comparison with predicted and experimental results. It can accurately describe the nonlinear magnetization process and magnetic saturation characteristics of soft magnetic materials. Based on the electromagnetic transient coupling principle, an electromagnetic mathematical model of a high‐speed solenoid valve (HSV) is developed in Fortran language that takes the saturation phenomena of the electromagnetic force into consideration. The accuracy of the model is validated by the comparison of the simulated and experimental static electromagnetic forces. Through experiment, it is concluded that the increase of the drive current is conducive to improving the electromagnetic energy conversion efficiency of the HSV at a low drive current, but it has little effect at a high drive current. Through simulation, it is discovered that the electromagnetic energy conversion characteristics of the HSV are affected by the drive current and the total reluctance, consisting of the gap reluctance and the reluctance of the iron core and armature soft magnetic materials. These two influence factors, within the scope of the different drive currents, have different contribution rates to the electromagnetic energy conversion efficiency.
A 3D numerical simulation model of high-speed solenoid valve (HSV) for electronic control fuel injection system (ECFIS) has been developed. The model has been validated experimentally with acceptable maximum errors of 2% and 8.7% in closure response time and open response time, respectively. Effect of assembly parameters such as residual air gap, maximum lift of valve stem, mass of the moving parts, spring stiffness, and spring pretightening force on dynamic response characteristics of HSV has been analyzed in detail using the simulation model, and influence rules of various parameters on dynamic response characteristics have been established. Moreover, the correlation between interaction factors of main influence factors and dynamic response characteristics of HSV has also been analyzed. It is concluded that residual air gap, maximum lift of the valve stem, and spring pretightening force are the main influencing factors on dynamic response characteristics of HSV, and there are obvious interaction effects between them; when two or three of these main influencing factors are adjusted at the same time, the interaction effects should be considered.