Zhiwei Liu

Dr. Zhiwei Liu

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2023 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
CZChongyu Zhao
Chongyu Zhao
HWHanfeng Wang
Hanfeng Wang
ZLZhiwei Liu
Zhiwei Liu
Md. Mahbub AlamMd. Mahbub Alam
Md. Mahbub Alam
Hui TangHui Tang
Hui Tang
As a follow-up study of Wang et al. [“Control of the flow around a finite square cylinder with a flexible plate attached at the free end,” Phys. Fluids 34(2), 027109 (2022)], this paper presents an experimental study of flow around a wall-mounted finite square cylinder with a vertically clamped flapping film at its free end. The width (d) of the square cylinder was 40 mm, and the aspect ratio (H/d) was 5, where the height H was 200 mm. The flexible film was made of low-density polyethylene, with a thickness of 0.04 mm and the width and length (l) each of d. Flow visualization and particle image velocimetry were conducted in the central lateral plane and several horizontal planes to reveal the 3D structure of the flapping induced vortex (FIV) and its effects on the cylinder near wake. All measurements were done in a low-speed wind tunnel at a flow speed of U∞ = 5 m/s with a Reynolds number of 13 700 based on U∞ and d. Previous study suggests that the flapping film reduces aerodynamic forces of the cylinder significantly and that the fluctuating lateral force is reduced by 60% [Wang et al., “Control of the flow around a finite square cylinder with a flexible plate attached at the free end,” Phys. Fluids 34(2), 027109 (2022)]. Vortices that shed from the trailing edge of the flapping film connect those from the side edges, forming n-shape FIVs downstream. FIVs induce more high-speed flow downwards into the wake, which suppresses the mean recirculation zone near the free end but enlarges it in the lower part of the wake. The two legs of n-shape FIVs are symmetrically arranged near the cylinder free end, whose effects diminish gradually as approaching the bottom wall, where alternating Karman vortex shedding still prevails.

1 May 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
ZLZhiwei Liu
Zhiwei Liu
HWHanfeng Wang
Hanfeng Wang
JLJiaxuan Li
Jiaxuan Li
HLHuan Li
Huan Li
CZChongyu Zhao
Chongyu Zhao
The flapping dynamics of a flexible membrane (FM) and its effect on the flow fields over and pressure fluctuations on a forward-facing step (FFS) have been investigated experimentally. The two-dimensional FM with 40 mm in length and 0.15 mm in thickness was vertically attached to the leading edge of a FFS with 40 mm in height. The deformation of the flapping FM was recorded by a high-speed camera. Velocity data in the vertical central plane and the pressure fluctuations on the step surface were measured by planar particle image velocimetry and pressure sensors, respectively. The results demonstrate that as the dimensionless bending rigidity (γ) of the FM decreases, the FM displayed two distinct modes, i.e., the bending mode and the flapping mode. In the bending mode, the bent FM is similar to a curved barrier, which elevates the shear layer and delays the reattachment of separation flow. In the flapping mode, the amplitude of the FM increases with the decrease in γ, which in turn effects the scale of flapping-induced vortices (FIVs). In proper orthogonal decomposition analysis, the results reveal a transition in the dominant flow structure from large-scale separation to FIVs with reducing γ. The FIVs significantly affect the pressure distribution on the step surface of the FFS, and the range where the coherent contribution dominates expands with the decreasing γ.

1 August 2025 in Physics of Fluids
Verified
Journal Article
Closed access
YYYapeng Yin
Yapeng Yin
HWHanfeng Wang
Hanfeng Wang
HLHuan Li
Huan Li
HLHangzhao Liu
Hangzhao Liu
ZLZhiwei Liu
Zhiwei Liu
This study investigates the influence of split flexible flags on the vortex-induced vibration (VIV) characteristics of a rectangular cylinder with a 5:1 breadth-to-depth ratio. Wind tunnel experiments were conducted, incorporating pressure and displacement measurements alongside flow visualization techniques. A systematic comparison was made between the uncontrolled VIV behavior and the cases where split flags were applied at the leading and trailing edges. The results demonstrate that the development of primary and secondary resonance regions is governed by the number of motion-induced leading-edge vortices (MILEVs) generated along the cylinder's sides. In the secondary resonance region, MILEVs are shorter, slower, and require two vibration cycles to shed from the trailing edge, while in the primary resonance region, they complete shedding within one cycle. Furthermore, the split flags prove effective in mitigating VIV by altering the pressure distribution around the cylinder, promoting a more uniform energy dissipation, and reducing fluctuating lift coefficients by up to 67.4%. The flapping-induced vortices generated by the flags interfere with the formation of original vortex structures, thereby suppressing the motion-induced vortices that drive VIV. This study presents a novel approach to VIV mitigation in structures with large breadth-to-depth ratios, offering substantial potential for practical engineering applications.

23 October 2026 in Biomimetics
Verified
Journal Article
Open access
PDF file
JLJiaxuan Li
Jiaxuan Li
ZLZhiwei Liu
Zhiwei Liu
HWHanfeng Wang
Hanfeng Wang
YLYing Li
Ying Li
Md. Mahbub AlamMd. Mahbub Alam
Md. Mahbub Alam
Flexible biological features, such as bird covert feathers and fish fins, provide remarkable flow control without external energy input. Inspired by nature, flow control using flexible auxiliary structures has attracted substantial scientific interest in recent years. They modify flow fields through morphological reconfiguration and flow-induced flapping, thereby modulating energy exchange between the fluid and the structure. Recent research can be categorized into five major applications: drag reduction, vibration suppression, lift augmentation, noise mitigation, and mixing enhancement. This review synthesizes and critically evaluates existing studies on flexible auxiliary structures across these five application areas, with particular emphasis on the underlying flow-control mechanisms. It further analyses how key parameters, including bending rigidity, geometric dimensions, and installation position, influence the control performance. It also distills the primary challenges facing flexible auxiliary structures as they transition from theoretical research to practical applications and outlines prospects for their evolution towards intelligent control systems.