Based on the 0.5 μm GaAs enhancement/depletion (E/D) Pseudomorphic High Electron Mobility Transistor (pHEMT) process, a 7.5–9 GHz two-channel amplitude phase control multi-function chip (MFC) was developed successfully. The chip was integrated with a 6-bit digital phase shifter, a 6-bit digital attenuator, and a single pole single throw (SPST) switch in each channel. A design for the absorptive SPST switch is deployed to optimize the return loss and control channel array calibration. In the 8 dB and 16 dB attenuation bit, a switched-path-type topology is employed in order to obtain a good flatness of attenuation characteristic and achieve low additive phase shift. A 27-bit serial-to-parallel converter (SPC) was introduced to decrease the control lines and pads of the chip, and the power consumption was less than 70 mW. The measurement result shows that the insertion loss is less than −13 dB and the return loss is better than −19 dB. In both channels, the 64-state root mean square (RMS) errors of the phase shifter is less than 2° and the RMS parasitic amplitude error is less than 0.2 dB. The RMS attenuation error is less than 0.45 dB and the RMS parasitic phase error is less than 2.4°. The size of the chip is 3.5 mm × 4.5 mm.

This paper presents an X-band 40 W power amplifier with high efficiency based on 0.25 μm GaN HEMT (High Electron Mobility Transistor) on SiC process. An equivalent RC (Resistance Capacitance) model is presented to provide accurate large-signal output impedances of GaN HEMTs with arbitrary dimensions. By introducing the band-pass filter topology, broadband impedance matching networks are achieved based on the RC model, and the power amplifier MMIC (Monolithic Microwave Integrated Circuit) with enhanced bandwidth is realized. The measurement results show that this power amplifier at 28 V operation voltage achieved over 40 W output power, 44.7% power-added efficiency and 22 dB power gain from 8 GHz to 12 GHz. The total chip size is 3.20 mm × 3.45 mm.

Parasitic optical losses, including free-carrier absorption and absorption from the rear mirror, could significantly affect the performance of solar cells. Although estimates of their influence have been made in the past, they have not previously been incorporated into the absorptivity of semiconductor materials and their influence on the performance of perovskite solar cells studied quantitatively. This paper numerically investigates the impact of both typical kinds of parasitic optical losses on the performance of perovskite solar cells utilizing the detailed balance model. It is found that the free carrier absorption loss has nearly no influence on the performance of perovskite solar cells, but parasitic absorption at the rear mirror can significantly affect the performance of solar cells. For thin film perovskite solar cells, parasitic absorption significantly affects the short circuit current, open circuit voltage and power conversion efficiency (PCE), but for thick solar cells, the short circuit current is nearly independent of the parasitic absorption; it seriously affects the open circuit voltage and PCE.

Sciendo provides publishing services and solutions to academic and professional organizations and individual authors. We publish journals, books, conference proceedings and a variety of other publications.