This paper deals with a comparative analysis and benchmarking of drinking water supply systems and water supply sector in the selected countries of Central and Eastern Europe. These include the Czech Republic, Poland, Romania, and Slovakia. The article provides an analysis of existing benchmarking systems in each country. Methods of supervision and control over the assessment and the functioning of the organizations responsible for the assessment and benchmarking of water utilities are also described. Comparative analysis for the selected performance indicators is carried out. The units, methods of data collection and processing were described.

The aims of the research are to focus on the analysis of qualitative parameters of surface runoff from the urbanized area (parking, roadways); subsequently, to compare the measured concentration with the recommendations of Danish and Slovak standards. Rainwater sampling carried out at several sites in Serbia and Slovakia. In the analysis were monitoring, the qualitative parameters as pH value, water conductivity, chemical oxygen demand, and heavy metals. The results show the presence of copper, zinc, lead, aluminum, cadmium, chromium and nickel. The concentration of these parameters was several times higher than the allowed limit values. Based on these results, it is necessary to design measures to ensure surface runoff before infiltration.

The goal of this work is the hydraulic capacity assessment of selected combined sewer systems in the city of Trnava. The selected sewer system constitutes from 160 sections 3.3 km long. Hydraulic capacity assessment will test sewer system, created in SeWaCAD program with design rainfall events with varied frequencies. The result of assessment showed that hydraulic capacity of combined sewer system did not meet requirements to properly work. Malfunctioning sewer pipelines must be changed. Design rain with frequency at least one in two years will be used as restoration model.

In connection with the optimization of operation at the selected Wastewater Treatment Plant (WWTP), it is important to perform an energy audit with an assessment of the use of electricity and the subsequent economic optimization of the equipment of the WWTP. We can perform the energy balance through Life Cycle Assessment (LCA) analysis in relation to EN ISO 140 40 [1].The aim of this study case is the analysis of the energy balance of WWTP. The appraisal was performed on three different interpretation variants of specific electricity consumption. The conclusion is a comparison of variants of quantification of specific electricity consumption.

The aim of the study is to assess the hydraulic capacity of the sewer network and sewer collector recovery in the urban catchment area of Trnava.The analysis focuses on the evaluation of situations with different precipitation frequencies. Elaboration consists of modeling the current state of the assessed sewer collector B and subsequent loading of this collector by several block rainfalls. Based on the results of the analysis, the recovery of the sewer network proposed.