The longitudinal end effect of the double-sided permanent magnet linear synchronous motor (DS-PMLSM) causes a large end force. To overcome this drawback, this paper proposes a novel DS-PMLSM structure, in which the upper or lower primary component is shifted by a certain distance. First, the end-force model of the DS-PMLSM is established, based on which, the influences of the staggered structure on the fundamental and higher-order end-force components are analysed. Following this, the DS-PMLSMs with different slot-pole combinations are divided into four categories, and the design principles of possible winding arrangements are discussed. Furthermore, the staggered structures are applied to four slot-pole combinations, namely 21-pole/18-slot, 15-pole/18-slot, 20-pole/18-slot, and 16-pole/18-slot. The back electromotive forces (EMFs), detent forces, thrusts and normal forces of the four combinations are analysed and compared through the finite element method (FEM). The electromagnetic and output characteristics of the novel DS-PMLSM are also compared with the traditional DS-PMLSM prototype to verify the effect of the proposed structure on suppressing the end force.
The multilayer flux-barrier structure creates strong magnetic saliency in linear permanent magnet-assisted synchronous reluctance motors (PMa-SynRM-LMs). It offers high thrust density with a reduced permanent magnet volume, but it can also produce severe thrust ripple. This paper investigates the secondary structure to balance average thrust and thrust ripple. A sensitivity analysis is first performed. A reduced-order optimization framework that combines sensitivity screening with response surface methodology (RSM) is then used to reduce the number of optimization variables. To further suppress thrust ripple, a modular primary structure with an optimized staggered displacement is proposed, and several modular configurations are compared. The selected configuration reduces the thrust–ripple coefficient from 31.7% to 19.1%, corresponding to a reduction of 12.6 percentage points (39.7% relative), while the average thrust decreases from 302.6 N to 267.7 N (11.5%). A PMa-SynRM-LM prototype is manufactured and tested. The separately measured module back-EMFs provide preliminary experimental support for the electromagnetic model; synchronized series-connected measurements and closed-loop drive tests remain future work.