Natural zeolite is a honeycomb-structured aluminosilicate mineral with an open crystalline structure which makes it suitable for a variety of applications. Given the beneficial effects of zeolites on the properties of cementitious materials, the present paper aims to summarize the recent findings reported in the scientific literature on the use of zeolites in cement-based construction materials. This paper limits the analysis to natural zeolites. The influence of natural zeolites on the workability and setting time of cement-based construction materials revealed that increasing the zeolite content led to a reduction in workability compared to the control mixes. At the same time, the initial and final setting times of cement pastes showed a decreasing trend with an increase in the replacement percentage. The slow pozzolanic reaction of clinoptilolite zeolite results in lower flexural strength and compressive strength values of mortars at the age of 28 days. Blending zeolites with other supplementary cementitious materials resulted in improved values of the mechanical properties of mortar and concrete. The findings regarding the impact of zeolite on the durability of concrete suggest that zeolite shows promise as a viable alternative to cement, with positive effects on various aspects of durability. The majority of the durability factors are interconnected. The presence of conflicting findings is particularly significant in this context, highlighting the need for a comprehensive approach to address these challenges in the future.
26 June 2024 in Construction and Building Materials
The paper presents the results of a research work aimed at assessing the long-term strength and elastic properties of rubberized concrete. The parameters of the research were the rubber replacement of fine aggregates and the age of testing the specimens. Compressive and splitting tensile strength of concrete cylinders were obtained at the age of 5 years, coupled with the static and dynamic modulus of elasticity of all concrete specimens. Additionally, the material damping coefficient was assessed by means of non-destructive tests. The density of the rubberized concrete decreases with the percentage replacement of natural sand by rubber aggregates. A significant drop in the values of density after 5 years was observed for specimens made with rubberized concrete. The static and the dynamic moduli of elasticity decrease with the increase in rubber content. A similar trend is observed for the compressive and tensile splitting strength.
Construction materials, among which concrete is by far the most used, have followed a trend of continuously increasing demand in real estate. A relatively small number of research works have been published on the long-term material properties of concrete in comparison to studies reporting their findings at standard curing ages of 28 days. This is due, in part, to the length of time one must wait until the intended age of concrete is reached. The present paper contributes to filling this gap of information in terms of the strength and dynamic elastic properties of concrete. The dynamic modulus of elasticity may be used to assess the static modulus of elasticity (Young’s modulus), a key property used during the design stage of a structure, in a non-destructive manner. This paper presents the results obtained from laboratory tests on the long-term (6 years) characterization of concrete from the point of view of dynamic shear and longitudinal moduli of elasticity, dynamic Poisson’s ratio, static modulus of elasticity, compressive and tensile splitting strengths, and their change depending on the concrete strength class.
Creating new construction materials with improved strength, elasticity, and durability properties represent the focus of many research works. Significant research effort has been invested in investigating the use of carbon nanotubes (CNTs) in cementitious materials, especially multi-walled carbon nanotubes (MWCNTs) which consist of a series of concentric graphite tubes. The use of MWCNTs is closely related to the use of surfactants and ultra-sonication procedures which may alter their properties and the properties of cement-based materials. The paper presents the preliminary results of an experimental investigation on the suitability of using a new, modified, MWCNT type aimed at eliminating the need of using surfactants and ultrasonication. The modified MWCNTs have a much lower surface energy compared to “classical” ones which would result in a decreased tendency of self-aggregation. A comparison was carried out from the point of view of density, flexural and compressive strength as well as dynamic modulus of elasticity of the obtained mortars. The mortar mix incorporating the modified MWCNTs showed improved mechanical properties even for a low percentage of CNT addition (0.025% by mass of cement). The results are discussed based on the material structure determined from a series of scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses.
The paper presents the results of research work to assess the thermal conductivity of mortar incorporating a novel carbon-based nano-material (CBN). The data from the laboratory tests served as the starting point in training an artificial neural network (ANN) based on the Levenberg–Marquardt backpropagation algorithm that was used to predict the values of the thermal conductivity at later ages. The used CBNs were essential precursors of multi-walled carbon nano-tubes but different from their counterparts in the fact that they were capped at the ends. This configuration should result in lower surface tension and should prevent the bundling even without the use of surfactants and sonication. The obtained results show that the mortar mixes with CBN exhibit higher values for the thermal coefficient at early ages compared to the reference mix, even at very low percentages of CBN by weight of cement. The ANN is able to accurately predict the experimental results both at 28 days and at later ages. The obtained results should serve as the starting point for further investigations into the microstructure of cement-based materials enhanced with CBNs.