WANG Dou

Mr. WANG Dou


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 February 2025 in Energies
Verified
Journal Article
Open access
PDF file
Feng WangFeng Wang
Feng Wang
YSYifan Song
Yifan Song
WDWANG Dou
WANG Dou
YSYifan Song
Yifan Song
ZLZhuangzhuang Li
Zhuangzhuang Li
JLJun Liu
Jun Liu
This paper presents the establishment of an accurate loss model for high-power-density IGBT modules used in electric vehicles, leveraging the thermal simulation capabilities of the power electronics simulation software PLECS 4.1. The study aims to address the significant influence of IGBT losses on the energy efficiency and reliability of electric vehicles. A simulation model was built using the SVPWM modulation strategy to drive a three-phase inverter, and the average loss method was employed to determine both conduction and switching losses. The simulation results were compared with calculations based on the datasheet, showing a deviation of less than 4%. For instance, the actual conduction loss was found to be 7.988 W, compared to the theoretical calculation of 8.16 W, with a deviation of 2.15%. Similarly, the switching loss was 22.069 W, compared to the theoretical value of 22.447 W, with a deviation of 1.71%. These results confirm that the proposed model accurately predicts losses under specified conditions. Compared with traditional methods, the model presented in this paper offers higher precision and improved simulation speed, thus proving effective for accurate loss analysis of IGBT modules and supporting further energy efficiency improvement and system optimization in electric vehicles.

6 January 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Feng WangFeng Wang
Feng Wang
YSYifan Song
Yifan Song
WDWANG Dou
WANG Dou
YSYifan Song
Yifan Song
ZLZhuang Zhuang Li
Zhuang Zhuang Li
JLJun Liu
Jun Liu
This paper presents the establishment of an accurate loss model for high-power-density IGBT modules used in electric vehicles, leveraging the thermal simulation capabilities of the power electronics simulation software PLECS. The study aims to address the significant influence of IGBT losses on the energy efficiency and reliability of electric vehicles. A simulation model was built using the SVPWM modulation strategy to drive a three-phase inverter, and the average loss method was employed to determine both conduction and switching losses. The simulation results were compared with calculations based on the datasheet, showing a deviation of less than 4%, which confirms that the proposed model accurately predicts losses under specified conditions. Compared with traditional methods, the model presented in this paper offers higher precision and improved simulation speed, thus proving effective for accurate loss analysis of IGBT modules and supporting further energy efficiency improvement and system optimization in electric vehicles.

11 September 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XYXianjin Yin
Xianjin Yin
TMTianyu Ma
Tianyu Ma
WDWANG Dou
WANG Dou
Feng WangFeng Wang
Feng Wang
To address the challenge of quantitatively identifying thermal-resistance contributions from multi-layer packaging structures within liquid-cooled insulated-gate bipolar transistor (IGBT) modules, this study establishes a three-dimensional conjugate heat-transfer model incorporating the chip, solder layer, direct-bonded copper (DBC) ceramic layer, substrate, elliptical pin-fin heat sink, and fluid domain. The IGBT and fast-recovery diode (FRD) power losses under typical motor controller operating conditions are modeled as volumetric heat sources applied to the chip region. Based on model validation, an internal thermal bottleneck evaluation method is proposed using inter-layer temperature-drop decomposition, introducing the thermal bottleneck number (BN) to quantify the temperature-drop contribution of each packaging layer along the target chip’s heat-dissipation path. Results show that in the baseline structure, the DBC ceramic layer is the critical internal thermal bottleneck, with a BN value of 11.05%. When the DBC thermal conductivity increases from 20 W/(m·K) to 80 W/(m·K), the maximum junction temperature of the IGBT decreases from 413.32 K to 396.79 K, and the BN drops from 11.05% to 3.69%. Conversely, when the DBC thickness increases from 0.20 mm to 0.50 mm, the maximum junction temperature rises from 405.45 K to 424.42 K. Further analysis reveals that after weakening the DBC thermal bottleneck, the relative temperature-drop contribution of the solder interface becomes increasingly apparent; notably, a central 20% low-conductivity defect in the solder layer raises the maximum junction temperature to 517.16 K, 103.84 K higher than under normal solder conditions. These findings provide valuable insights for identifying internal thermal bottlenecks and optimizing packaging structures in liquid-cooled IGBT modules.

1 November 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Feng WangFeng Wang
Feng Wang
PZPing Zhou
Ping Zhou
WDWANG Dou
WANG Dou
ZZZheng ZL
Zheng ZL
To address the thermal bottlenecks in high-power-density liquid-cooled IGBT modules, a synergistic optimization method integrating thermal-bottleneck mitigation and thermal-shortcut enhancement is proposed. The thermal conductivity and thickness of the DBC ceramic layer, solder-layer thickness, pin-fin configuration, and coolant flow rate are selected as design variables, and eight staged optimization cases are constructed. The thermal performance of the IGBT module is evaluated using the maximum junction temperature, total equivalent thermal resistance, thermal bottleneck index, thermal shortcut index, and pressure drop. A BP neural-network surrogate model is further developed for rapid prediction and screening of candidate parameter combinations. The results show that the DBC ceramic layer is the dominant internal thermal bottleneck and that its optimization provides the largest contribution to junction-temperature reduction. Enhancement of the external pin-fin structure and coolant flow rate strengthens the thermal shortcut, although a clear diminishing marginal effect is observed. CFD verification demonstrates that, compared with the baseline design O0, the engineering trade-off design O9 reduces the maximum junction temperature by 28.26 K and the total equivalent thermal resistance by 37.6%. Moreover, the junction-temperature swing of the target chip is reduced by 23.85%, and the predicted lifetime of the IGBT chip is approximately 2.83 times that of the baseline design. These results demonstrate that the synergistic integration of internal thermal-bottleneck mitigation, external thermal-shortcut enhancement, and single-objective screening can effectively improve both the thermal performance and reliability of liquid-cooled IGBT modules.

21 October 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Feng WangFeng Wang
Feng Wang
MZMengzhen Zhang
Mengzhen Zhang
WDWANG Dou
WANG Dou
ZZZheng ZL
Zheng ZL
To address the challenge of achieving a balanced match between internal thermal resistance bottlenecks and enhanced external heat dissipation in high-power-density liquid-cooled IGBT modules, this paper establishes a three-dimensional conjugate heat transfer model comprising the IGBT/FRD chip, the packaging layer, the substrate, the elliptical pin-fin heat sink, and the fluid domain, and identifies the thermal resistance bottlenecks along the main heat transfer paths through interlayer temperature-drop decomposition. Furthermore, the thermal shortcut number (SN), defined based on the ratio of overall equivalent thermal resistances, is introduced as a supplementary metric to evaluate the relative changes in overall thermal resistance among different heat dissipation structures. In conjunction with the maximum chip temperature and pressure drop, the effects of cooling conditions, pin-fin structural parameters, and zonal regulation strategies on the thermal performance and flow resistance of the module are investigated. The results indicate that when the coolant flow rate is increased from 4 L/min to 12 L/min, the maximum chip temperature decreases by 16.27 K. However, the pressure drop increases from 1.93 kPa to 13.59 kPa, demonstrating a clear diminishing marginal return. While global thinning of the pin fins, reduction in their cross-sectional dimensions and lowering of their height can reduce the pressure drop, these measures weaken the solid–liquid heat transfer area and the capacity of external thermal shortcut; by contrast, zone-based control and flow-direction gradient structures can effectively improve the thermal–flow matching; amongst these, the local high-temperature suppression structure reduces the maximum chip temperature by 0.84 K, lowers the pressure drop by 3.89%, and increases the SN to 1.003; while the height-gradient structure along the flow direction reduces the pressure drop by 17.91% with a temperature rise of only 0.63 K. The study indicates that the optimisation of thermal management for liquid-cooled IGBT modules should balance the reduction of internal thermal resistance with the enhancement of external heat dissipation, in order to establish an external thermal shortcut characterized by low thermal resistance and low pressure drop that are well-matched to the distribution of heat sources, thereby achieving the synergistic optimisation of thermal and flow performance.