Nikita Popov

Nikita Popov

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 August 2024 in Nuclear Energy and Technology
Verified
Journal Article
Open access
PDF file
NPNikita Popov
Nikita Popov
ASAlexey Suchkov
Alexey Suchkov
MZMikhail Zharkov
Mikhail Zharkov
VKVeronika Kirillova
Veronika Kirillova
ABAlexander Bazhenov
Alexander Bazhenov
OSOleg Sevryukov
Oleg Sevryukov
Development of new plasma facing components (PFC) draw attention of numerous scientific groups in fusion energy field. Tungsten as a main PFC material main have poor machinability, thus various designs were proposed to overcome this problem. However, such technologies as functional graded layers, sintering and additive technologies are limited in production size and have low cost-efficiency. This research considers the alternative approach of steel melt injection or melt infiltration of tungsten mesh. The results obtained establish the mechanism of phase evolution during interaction of solid W with liquid steel and iron. Energy dispersive spectroscopy, X-ray diffraction and Thermocalc calculations used to analyze the phase composition of tungsten wetted with various steels and pure iron. Results show that interaction rate significantly depends on melt temperature and overheating above its liquidus. Then the overheating exceeds 150 °C erosion of tungsten occur.

20 September 2023 in Fusion Engineering and Design
Verified
Journal Article
Closed access
NPNikita Popov
Nikita Popov
DBD. Bachurina
D. Bachurina
RBR. Bogdanov
R. Bogdanov
IKI. Kozlov
I. Kozlov
PDP. Dzhumaev
P. Dzhumaev
OKO. Krutikova
O. Krutikova

7 March 2024 in Fusion Engineering and Design
Verified
Journal Article
Closed access
VKV.O. Kirillova
V.O. Kirillova
NPNikita Popov
Nikita Popov
JGJ.A. Gurova
J.A. Gurova
DBD.M. Bachurina
D.M. Bachurina
XTX. Tan
X. Tan
ASA.N. Suchkov
A.N. Suchkov

11 January 2023 in Metals
Verified
Journal Article
Open access
PDF file
AIAlex Ivannikov
Alex Ivannikov
AAA.V. Abramov
A.V. Abramov
NPNikita Popov
Nikita Popov
MPMilena Penyaz
Milena Penyaz
ASAleksei Suchkov
Aleksei Suchkov
OSOleg Sevryukov
Oleg Sevryukov
An Al-40.0Ge-3.4Si wt.% alloy foil with a thickness of 50 ± 5 μm, obtained via an ultrafast solidification method, is described in this work. A complete wetting of the aluminum alloy substrate with a wetting angle of 0° is observed, and the formation of a drop with a wetting angle of 30 ± 5° is observed on the steel substrate. Similar and dissimilar brazed joints of aluminum alloy AA 6082 and stainless-steel AISI 304 are obtained. The microstructure of the AA 6082/AA 6082 brazed seam is homogeneous and contains particles of an Al7Fe2Si system intermetallic compound and particles of an Al-Ge eutectic composition. The brazed seam of the AISI 304/AISI 304 joint is formed due to the formation of the Al8Fe2(Si, Cr) intermetallic compound reaction layer on the steel surface. The proposed scheme for the AISI 304/AA 6082 brazed joint formation is given. The brazed seam represents the Al8Fe2(Si, Cr) reaction layer on the steel surface, the thickness of which depends on the holding time during brazing, and the aluminum matrix of which has particles of a composition close to an Al-Ge eutectic. The obtained results could be used for the optimization of time–temperature brazing modes in order to improve the mechanical characteristics of AISI 304/AA 6082 dissimilar joints.

29 November 2021 in Metals
Verified
Journal Article
Open access
PDF file
AIAlex Ivannikov
Alex Ivannikov
VFVASILII FEDOROV
VASILII FEDOROV
AAA.V. Abramov
A.V. Abramov
MPMilena Penyaz
Milena Penyaz
DBDiana Bachurina
Diana Bachurina
OSOleg Sevryukov
Oleg Sevryukov
Aluminum alloys based on the Al-Ge-Si system with a germanium content of up to 40 wt.%, promising for the brazing of aluminum alloy AA6082 with the stainless steel AISI 304, were studied. The temperature characteristics and microstructural and mechanical properties of the filler alloys were systematically investigated. Differential scanning calorimetry showed that with an increase in the germanium content from 28.0 to 40.0 wt.%, the liquidus temperature of the filler alloys decreased from 514.8 to 474.3 °C. X-ray diffraction analysis and electron microscopy data showed that the foil of the filler alloys reveals a homogeneous structure. The ingots of the alloys contain two eutectics, the first of which consists of a solid solution of (Al, Ge) with a solid solution of (Ge, Si), and the second consists of a solid solution of (Al, Ge) with a solid solution based on (Ge). When the content of germanium increases from 28.0 to 40.0 wt.%, a separation of the faceted solid solution particles (Ge, Si) and an increase in their number could be observed. Nanohardness measurements showed that the (Ge, Si) and (Ge) solid solutions had similar nanohardness, with values of 11.6 and 10.2 GPa, respectively. Simultaneously, the Al solid solution and the intermetallic Al7Ge2Fe phase exhibited significantly lower nanohardness values of 0.7 and 6.7 GPa, respectively. Brinell hardness measurements showed that the ingots of the filler alloys were sufficiently ductile and had a hardness comparable to that of AA6082, which is used for brazing with AISI 304 stainless steel. The obtained results for the studied ingots and the rapidly quenched foils can be used to predict the forming structure of the seam after brazing and adjusted for diffusion processes occurring between the brazed materials and the studied filler alloys.

22 August 2020 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
АIА. Ivannikov
А. Ivannikov
EKE. Krasnova
E. Krasnova
МPМ. Penyaz
М. Penyaz
NPNikita Popov
Nikita Popov
АMА. Melnikov
А. Melnikov
OSO. Sevryukov
O. Sevryukov