Luka Čas

Mr. Luka Čas

orcid

Research Focus & Metrics

Representative Publications

View All Publications
9 October 2026 in Sensors
Verified
Journal Article
Open access
PDF file
LČLuka Čas
Luka Čas
BABojan Ačko
Bojan Ačko
RKRok Klobucar
Rok Klobucar
High-precision displacement transducers are widely used in dimensional metrology due to their sub-micron accuracy and broad applicability. The increasing use of such sensors has led to a growing demand for SI-traceable calibration, requiring high-accuracy systems beyond the capabilities of commercial solutions. This paper presents the development of a dedicated calibration system for displacement transducers with measuring ranges up to 150 mm and its experimental evaluation over a 60 mm measurement range. The system is based on commercially available components and employs a laser interferometer as the reference standard, enabling an absolute measurement principle with direct traceability to the primary length standard. The calibration set-up is fully automated and designed to minimize dominant sources of systematic errors, particularly geometric misalignments including transducer alignment, interferometer beam alignment and Abbe error. A structured calibration procedure and a comprehensive measurement uncertainty model are presented to ensure repeatable and traceable calibration. Experimental evaluation was performed using a high-resolution displacement transducer with 60 mm measurement range in both directions of motion. The results demonstrate the repeatability and performance of the developed system over the experimentally investigated 60 mm measurement range and are consistent with the proposed uncertainty model. Based on this model, the expanded measurement uncertainty of the proposed calibration system is estimated to be 130 nm (k = 2) for measurement ranges of up to 150 mm.

11 August 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RKRok Klobučar
Rok Klobučar
LČLuka Čas
Luka Čas
BABojan Ačko
Bojan Ačko
The demands on the product complexity and quality are rising constantly, so it is necessary to constantly improve manufacturing processes and, as a consequence, measuring equipment, measurement standards and their calibrations. Ring gauge is a cylindrical gauge with a bore of precise dimension. In metrology, ring gauges are used as master gauges for adjusting and calibrating measuring instruments, such as electronic bore gauges, air tooling gauges, internal micrometers and other length measuring instruments. It is used as a reference standard for calibrating and adjusting most internal comparators, and it plays an important role in dimensional metrology. This paper reports on the development, implementation, and metrological validation of a high‐precision calibration system for ring gauges, which represent one of the primary dimensional reference standards used in industrial metrology and accredited calibration laboratories. The presented calibration method is fast, simple and useful, as we use a classic laser interferometer with a retroreflector for the measurement. To achieve high-quality measurements, we do not need precision optical mirrors that need to be adjusted and evaluated. The principal objective of the developed calibration system was to establish a measurement methodology capable of achieving expanded uncertainties at the level of state‐of‐the‐art national metrology institutes, which currently provide traceable calibrations for high‐grade ring gauge standards. In parallel, the system was designed to ensure fully automated execution, thereby minimizing operator influence and improving measurement repeatability. The final metrological verification demonstrated that both the targeted uncertainty performance and the required degree of automation were successfully achieved.