Water damage is one of the main forms of early damage of highway asphalt pavement, which seriously affects the service performance of asphalt pavement. To address the problem of early water damage of asphalt pavement, the addition of anti-stripping agents in asphalt is an effective technical means. To further analyze the influence of anti-stripping agents on asphalt performance, Qingchuan rock asphalt, acylamine anti-stripping agent, fatty amine anti-stripping agent, rock asphalt + acylamine anti-stripping agent and rock asphalt + fatty amine anti-stripping agent were selected to modify the base asphalt. The rheological properties of modified asphalt were tested using a dynamic shear rheometer and bending beam rheometer. Combined with the mathematical-model-fitting test results of Sigmoidal, Burgers, viscoelastic continuum damage model (VECD), etc., the effects of different anti-stripping agents on the rheological properties of asphalt were evaluated through model parameters. The results showed that the Qingchuan rock asphalt could improve the high-temperature resistance to deformation of asphalt and improved the resistance to deformation of asphalt in a wide frequency domain but increased the risk of low-temperature cracking of asphalt. Acylamine anti-stripping agents and aliphatic amine anti-stripping agents reduced the elastic recovery ability and deformation resistance under a wide frequency domain of asphalt at high temperatures but enhanced the flexible deformation and ductility of asphalt at low temperatures. The compound anti-stripping agent not only improved the high-temperature deformation resistance of asphalt, but also improved the deficiency of rock asphalt’s low-temperature performance and effectively enhanced its performance.
Asphalt ultra-thin overlays have emerged as an efficient and cost-effective pavement preservation technology. However, because of their reduced thickness, their service life is often limited by cracking. Based on semi-circular bending (SCB) test data, this study developed three types of regression models: multiple linear regression (MLR), random forest regression (RFR), and artificial neural network (ANN) regression. The multifactor experimental matrix covered three test temperatures, three nominal maximum aggregate sizes, two binder types, three aging states, and four long-term aging durations. The results show that fracture energy (Gf), flexibility index (FI), and cracking resistance index (CRI) respond differently to individual factors. Gf and FI decreased as temperature increased, whereas CRI increased, indicating that CRI may be misleading at intermediate temperatures and should be interpreted cautiously. The aggregate size exhibits a non-monotonic relationship with the three indicators, reaching its maximum at a size of 8. Short-term aging increased the Gf, and the gain was more pronounced at higher aging temperature, reaching a maximum increase of up to 1.54 times. However, it also accelerated the subsequent Gf reduction during long-term aging, after the decline rate decreased. Higher short-term aging temperatures caused more pronounced deterioration in FI and CRI. Meanwhile, both indices gradually decreased with increasing long-term aging duration, and short-term aging further intensified this reduction. In model comparisons, ANN showed the most stable generalization. The factorwise trends were verified using both the Beta values and SHAP values, demonstrating the feasibility of the models for qualitative discrimination and trend interpretation. The integrated importance ranking identified long-term aging duration and temperature as the dominant factors. External validation further confirmed ANN as the most reliable model for predicting crack resistance evolution. These findings support crack-resistance prediction and provide guidance for optimizing the design of ultra-thin overlay asphalt mixtures.