Metal/alloy insert threaded polymer fittings are currently being widely used due to their outstanding advantages due to the combination of mechanical properties between polymers and metals/alloys. However, research and literature on metal insert thread adapter fittings are still limited nowadays. This study focuses on chlorinated polyvinyl chloride (CPVC) male threaded adapters with copper insert and their cracking for the purpose of conducting an insert threaded fitting literature. Crackings are generated by residual stresses accumulating internally over time, unobservable immediately after creating products. This study has discovered cracking by experiment and reduced residual stress by optimizing process parameters via the Taguchi method and mold–insert temperature survey, based on the Moldex3D simulation model. Furthermore, dimensional accuracy is ensured through the warpage displacement assessment. These methods could assist manufacturers in getting pilot-run samples to determine the suitable process parameters, ensuring the longevity of CPVC male threaded adapters with copper insert in particular and piping systems in general.
Droplet formation in microfluidic co-flow systems is essential for producing controlled emulsions in biomedical, pharmaceutical, chemical, and materials applications. Despite extensive studies of a wide range of operating conditions, existing predictive and nondimensional relations are generally restricted to specific flow regimes and physical mechanisms. In this study, we develop a regime-based theoretical and visualization framework for predicting droplet generation across three representative co-flow regimes: dripping, narrowing jetting, and widening jetting. The proposed framework combines force-balance and mass-conservation principles to derive explicit analytical expressions for droplet size and droplet-generation frequency in terms of key dimensionless parameters, including the outer capillary number, viscosity ratio, and flow-rate ratio. For dripping, droplet size decreases with increasing outer capillary number. In narrowing jetting, droplet size decreases while generation frequency increases due to jet stretching and thinning. In widening jetting, droplet size increases with flow-rate ratio. In addition, the influence of the viscosity ratio weakens as the value increases. The models are validated against experimental data from the literature and show good agreement in predicting droplet size and frequency across multiple flow regimes and operating conditions. This work provides a physics-guided, regime-aware reduced-order framework for analyzing and designing microfluidic co-flow droplet-generation systems.
3 November 2026 in Composites Part A: Applied Science and Manufacturing