Johanna Gaitán-Álvarez

Ms. Johanna Gaitán-Álvarez

Renewable Materials Research Centre (CRMR), Université Laval, Québec, Canada
+1

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2019 in Dendrochronologia
Verified
Journal Article
Closed access
Johanna Gaitán-ÁlvarezJohanna Gaitán-Álvarez
Johanna Gaitán-Álvarez
Roger Alonso Moya RoqueRoger Alonso Moya Roque
Roger Alonso Moya Roque
ABAlexander Berrocal
Alexander Berrocal

16 July 2020 in Journal of Wood Science
Verified
Journal Article
Open access
PDF file
Johanna Gaitán-ÁlvarezJohanna Gaitán-Álvarez
Johanna Gaitán-Álvarez
ABAlexander Berrocal
Alexander Berrocal
GMGeorge Mantanis
George Mantanis
Roger Alonso Moya RoqueRoger Alonso Moya Roque
Roger Alonso Moya Roque
FAFabio Araya
Fabio Araya
Acetylation of softwoods has been largely investigated to increase the dimensional stability and biological resistance of wood. However, the knowledge of this technology has not been applied to tropical hardwood species up to date. The objective of this work was to study the effect of acetylation on nine tropical hardwood species, from forest plantations in Costa Rica, by applying acetic anhydride in three different treatment times (1 h, 2.5 h, 4 h), as well as to evaluate this by Fourier-Transform Infrared Spectroscopy (FTIR). Results showed that weight percentage gain (WPG) of wood varied from 2.2 to 16.8%, withVochysia ferrugineaspecies showing the highest WPG, andGmelina arboreaandTectona grandisspecies exhibiting the lowest WPGs. Tropical woods such asEnterolobium cyclocarpum,Hieronyma alchorneoidesandSamanea samanexhibited statistical differences among treatment times, whereas the rest of the species studied showed no significant differences. In general, the most effective acetylation time was 2.5 h for all the species. The ratio of intensity (RI) from the FTIR spectra was greater at the 1732 cm−1, 1372 cm−1and 1228 cm−1peaks for all tropical species, associated with lignin. A good correlation between the RI of those peaks and WPG was found; the same was also found between all RIs and each other. Meanwhile, RI associated to the hemicelluloses and lignin (1592 cm−1and 1034 cm−1peaks, respectively) showed no correlation with WPG, nor between each other or with the other RIs. Furthermore, it was suggested that RI at 1732 cm−1(associated to acetyl groups C=O) can be considered as a reliable indicator of the degree of acetylation for tropical hardwood species. Finally, it was observed that tropical hardwoods having more suitable anatomical features, like larger vessel diameter, higher ray width and frequency, and lesser deposits such as gums and tyloses in the vessels, resulted in significantly higher WPGs.

21 March 2018 in Energies
Verified
Journal Article
Open access
PDF file
Johanna Gaitán-ÁlvarezJohanna Gaitán-Álvarez
Johanna Gaitán-Álvarez
Roger Alonso Moya RoqueRoger Alonso Moya Roque
Roger Alonso Moya Roque
APAllen Puente-Urbina
Allen Puente-Urbina
ARAna Rodriguez-Zúñiga
Ana Rodriguez-Zúñiga
We evaluated the thermogravimetric and devolatilization rates of hemicellulose and cellulose, and the calorimetric behavior of the torrefied biomass, of five tropical woody species (Cupressus lusitanica, Dipteryx panamensis, Gmelina arborea, Tectona grandis and Vochysia ferruginea), at three temperatures (TT) and three torrefaction times (tT) using a thermogravimetric analyzer. Through a multivariate analysis of principal components (MAPC), the most appropriate torrefaction conditions for the different types of woody biomass were identified. The thermogravimetric analysis-derivative thermogravimetry (TGA-DTG) analysis showed that a higher percentage of the hemicellulose component of the biomass degrades, followed by cellulose, so that the hemicellulose energy of activation (Ea) was less than that of cellulose. With an increase in TT and tT, the Ea for hemicellulose decreased but increased for cellulose. The calorimetric analyses showed that hemicellulose is the least stable component in the torrefied biomass under severe torrefaction conditions, and cellulose is more thermally stable in torrefied biomass. From the MAPC results, the best torrefaction conditions for calorimetric analyses were at 200 and 225 °C after 8, 10, and 12 min, for light and middle torrefaction, respectively, for the five woody species.

14 August 2017 in Energies
Verified
Journal Article
Open access
PDF file
Johanna Gaitán-ÁlvarezJohanna Gaitán-Álvarez
Johanna Gaitán-Álvarez
Roger Alonso Moya RoqueRoger Alonso Moya Roque
Roger Alonso Moya Roque
APAllen Puente-Urbina
Allen Puente-Urbina
ARAna Rodriguez-Zuñiga
Ana Rodriguez-Zuñiga
The purpose of the biomass torrefaction and pelletizing processes is to increase its energy properties, be environmentally friendly, decrease shipping costs, and make handling easier. The objective of the present work is to evaluate the density, internal density variation by X-ray densitometry, moisture content, water absorption, and compression force of torrefied biomass pellets of five wood species (Cupressus lusitanica, Dipterix panamensis, Gmelina arborea, Tectona grandis, and Vochysia ferruginea) under three torrefaction temperature conditions (light, middle, and severe) and three torrefaction times (8, 10, and 12 min). The results showed that the bulk density of the pellets was 0.90–1.30 g/cm3. The density variation of the pellets was higher with torrefaction at 250 °C. The moisture content decreased with increasing torrefaction temperature from 3% to 1%. Water absorption was lower in the pellets torrefied at 250 °C. The compression force was lower in the pellets torrefied at 250 °C with approximate loads of 700 N. Based on the above results, it was concluded that pellets made with biomass torrefied at 200 °C have better energy properties and evaluated properties. According to these results, pellets fabricated with the torrefied biomass of tropical species can be used in stove, gas, and hydrogen production because the pellet presents adequate characteristics.

1 April 2018 in Energy
Verified
Journal Article
Closed access
Roger Alonso Moya RoqueRoger Alonso Moya Roque
Roger Alonso Moya Roque
ARAna Rodríguez-Zúñiga
Ana Rodríguez-Zúñiga
APAllen Puente-Urbina
Allen Puente-Urbina
Johanna Gaitán-ÁlvarezJohanna Gaitán-Álvarez
Johanna Gaitán-Álvarez

21 November 2018 in Journal of Forestry Research
Verified
Journal Article
Closed access
PDF file
ABAlexander Berrocal
Alexander Berrocal
Johanna Gaitán-ÁlvarezJohanna Gaitán-Álvarez
Johanna Gaitán-Álvarez
Roger Alonso Moya RoqueRoger Alonso Moya Roque
Roger Alonso Moya Roque
DFDavid Fernández-Sólis
David Fernández-Sólis
EOEdgar Ortiz-Malavassi
Edgar Ortiz-Malavassi