Gas–solid cyclone separators are widely utilized in many industrial applications and usually involve complex multi-physics of gas–solid flow and heat transfer. In recent years, there has been a progressive interest in the application of computational fluid dynamics (CFD) to understand the gas–solid flow behavior of cyclones and predict their performance. In this paper, a review of the existing CFD studies of cyclone separators, operating in a wide range of solids loadings and at ambient and elevated temperatures, is presented. In the first part, a brief background on the important performance parameters of cyclones, namely pressure drop and separation efficiency, as well as how they are affected by the solids loading and operating temperature, is described. This is followed by a summary of the existing CFD simulation studies of cyclones at ambient temperature, with an emphasis on the high mass loading of particles, and at elevated temperatures. The capabilities as well as the challenges and limitations of the existing CFD approaches in predicting the performance of cyclones operating in such conditions are evaluated. Finally, an outlook on the prospects of CFD simulation of cyclone separators is provided.
1 February 2019 in Reviews in Chemical Engineering
Gas-solid fluidization is intrinsically dynamic and manifests mesoscale structures spanning a wide range of length and timescales. When involved with reactions, more complex phenomena emerge and thus pose bigger challenges for modeling. As the mesoscale is critical to understand multiphase reactive flows, which the conventional two-fluid model without mesoscale modeling may be inadequate to resolve even using extremely fine grids, this review attempts to demonstrate that the energy-minimization multiscale (EMMS) model could be a starting point to develop such mesoscale modeling. Then, the EMMS-based mesoscale modeling with emphasis on formulation of drag coefficients for different fluidization regimes, modification of mass transfer coefficient, and other extensions are discussed in an attempt to resolve the emerging challenges. Its applications with examples of development of novel fluid catalytic cracking and methanol-to-olefins processes prove that the mesoscale modeling plays a remarkable role in improving the predictions in hydrodynamic behaviors and overall reaction rate. However, the product content primarily depends on the chemical kinetic model itself, suggesting the necessity of an effective coupling between chemical kinetics and flow characteristics. The mesoscale modeling can be believed to accelerate the traditional experimental-based scale-up process with much lower cost in the future.
9 June 2022 in Industrial & Engineering Chemistry Research
Ethylene, one of the major basic chemicals in the modern chemical industry, has been industrially produced mainly through intensive energy-consuming steam cracking processes from light oil fractions or shale gas operated above 800 °C following the radical mechanism and seriously suffering from high methane selectivity. Herein, we report an efficient catalytic cracking reaction of 1-pentene over a tailored ZSM-5 catalyst at 700 °C with a C2H4/C3H6 ratio of 1.31 and a CH4 selectivity below 5%, which provides an energy-saving and economically viable route for ethylene production from light oil fractions, seamlessly integrating with the existing industrial catalytic cracking processes. Mechanistic studies unveil an interesting type of zeolite catalysis different from the typical acid catalysis following the carbenium ion mechanism, termed as the confined catalytic radical (CCR) mechanism in which 1-pentene dehydrogenates to gaseous pentenyl radicals (C5H9•) at non-acidic [AlO4]0 sites of ZSM-5 in situ formed by dehydrogenation of bridging hydroxyls, whose subsequent reactions confined in ZSM-5 produce more C2H4 than C3H6. These findings significantly broaden the concept and application of zeolite catalysis.