Optical frequency comb sources provide thousands of precise and accurate optical lines in a single device enabling the broadband and high-speed detection required in many applications. A main challenge is to parallelize the detection over the widest possible band while bringing the resolution to the single comb-line level. Here we propose a solution based on the combination of a frequency comb source and a fibre spectrometer, exploiting all-fibre technology. Our system allows for simultaneous measurement of 500 isolated comb lines over a span of 0.12 THz in a single acquisition; arbitrarily larger span are demonstrated (3,500 comb lines over 0.85 THz) by doing sequential acquisitions. The potential for precision measurements is proved by spectroscopy of acetylene at 1.53 μm. Being based on all-fibre technology, our system is inherently low-cost, lightweight and may lead to the development of a new class of broadband high-resolution spectrometers.

We demonstrate passive mode-locking by means of a semi-conductor saturable-absorber mirror in a diode-pumped Yb:YLF laser. We present crystal growth process, spectroscopic measurements, and investigation of mode-locking performance. Pulse trains with minimum duration of 196 fs, average power of 54 mW and a repetition rate of 55 MHz were obtained. The optical spectrum, centered at 1028 nm, has a 7.1-nm bandwidth leading to nearly transform-limited pulses.

Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.

Modeling a real laser diode stack based on Zemax ray tracing software that operates in a nonsequential mode is reported. The implementation of the model is presented together with the geometric and optical parameters to be adjusted to calibrate the model and to match the simulated intensity irradiance profiles with the experimental profiles. The calibration of the model is based on a near-field and a far-field measurement. The validation of the model has been accomplished by comparing the simulated and experimental transverse irradiance profiles at different positions along the caustic formed by a lens. Spot sizes and waist location are predicted with a maximum error below 6%.

We demonstrate nonlinear compression of pulses at 1.03 µm and repetition rate of 200 kHz generated by a ytterbium fiber laser using two cascaded all-solid-state multipass cells. The pulse duration has been compressed from 460 to 22 fs, corresponding to a compression factor of ∼21. The compressed pulse energy is 15.6 µJ, corresponding to an average power of 3.1 W, and the overall transmission of the two compression stages is 76%. The output beam quality factor is M² ∼1.2 and the excess intensity noise introduced by nonlinear broadening is below 0.05%. These results show that nonlinear pulse compression down to ultrashort durations can be achieved with an all-solid-state approach, at pulse energies much higher than previously reported, while preserving the spatial characteristics of the laser.

Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.