TiN and TiNxOy thin films share many properties such as electrical and optical properties. In this work, a comparison is conducted between TiN (with and without annealing at 400 °C in air and vacuum) and TiNxOy thin films deposited by using RF magnetron sputtering with the same pure titanium target, Argon (Ar) flow rate, nitrogen flow rates, and deposition time on stainless steel substrates. In the case of TiNxOy thin film, oxygen was pumped in addition. The optical properties of the thin films were characterized by spectrophotometer, and Fourier transform infrared spectroscopy (FTIR). The morphology, topography, and structure were studied by scanning electron microscope (SEM), atomic force microscope (AFM), and X-ray diffraction (XRD). The results show that both thin films have metal-like behavior with some similarities in phases, structure, and microstructure and differences in optical absorbance. It is shown that the absorbance of TiN (after vacuum-annealing) and TiNxOy have close absorbance percentages at the visible range of light with an unstable profile, while after air-annealing the optical absorbance of TiN exceeds that of TiNxOy. This work introduces annealed TiN thin films as a candidate solar selective absorber at high-temperature applications alternatively to TiNxOy.
1 November 2019 in Zagazig Journal of Agricultural Research
The present study demonstrates a positive correlation between zinc metal tolerance ability of an isolated fungi and their potential for the synthesis of zinc oxide nanoparticles (ZnO-NPs). A total of 5 fungal cultures were isolated from the rhizospheric soils of plants naturally growing at Sharkia Governorate in Egypt and identified based on morphological characteristics. These isolates are belongs to Aspergillus niger (An), Aspergillus tubulin (At), Aspergillus fumigatus(Af), Penicillium citrinum (Pc) and Fusarium oxysporum (Fo). These isolates were usedin the synthesis of zinc-oxide nanoparticles (An-ZnO-NPs, At-ZnO-NPs, Af-ZnO-NPs, Pc- ZnO-NPs and Fo- ZnO-NPs) using Zinc sulfate as the precursor compared to the references strains of A. tubingensis Mosseray AUMC No.6915, A. fumigatus Fresenius AUMC No.48and A. terreus Thom AUMC No.75. Aspergillus and Fusarium isolates have been shown to have a high zinc metal tolerance ability and a potential for extracellular synthesis of ZnO nanoparticles under ambient conditions. The synthesized ZnO-NPs were tested by the detection of a notable absorption peak at 285 to 296 nm, appearing in UV–Vis spectra due to surface-plasmon-resonance. Transmission electron microscope (TEM) results revealed that An-ZnO-NPs, At-ZnO-NPs, Af-ZnO-NPs, Pc- ZnO-NPs and Fo- ZnO-NPs exhibited a crystalline structure with hexagonal wurtzite shape (30–100 nm size). ZnO nanoparticles exhibited excellent antibacterial activity against tested Gram-positive and Gram-negative bacteria. The ZnO nanoparticles showed better antibacterial activity against Staphylococcus. aureus, Listeria. monocytogenes and Bacillus cereus compared to Salmonella enterica, Escherichia coli and Pseudomonas aerogenosa. The effectiveness of inhibition of the microbial biofilms formation of S.aureus, L. monocytogenes and B. cereus compared to S. enterica, E. coli and P. aerogenosa was analyzed at a concentration of 100 μg/ ml.
Titanium nitrides, oxides and oxynitrides (TiN, TiO2, and TiNxOy) are potential materials for several electronic and optical applications. In this work, TiN thin films are deposited by using RF magnetron sputtering (reactive sputtering type) with a pure titanium target, argon (Ar), and nitrogen (N2) gases. All sputtered TiN thin films were subsequently annealed in air at 800 C for 2 hours. The microstructure and the optical properties (absorbance and emittance) of sputtered TiN thin films are studied before and after annealing. The optical properties of all thin films before and after annealing are characterized by spectrophotometer, and Fourier transform infrared spectroscopy (FTIR). The morphology and structure are studied by scanning electron microscope (SEM), atomic force microscope (AFM), X-ray diffraction (XRD), and Raman spectroscopy. It was found that the optical absorbance of sputtered TiN thin films is changed after annealing and increased to 94% with a stable profile in ultraviolet (UV), visible range and near infrared (IR) ranges. The initial polycrystalline TiN microstructure is transformed after annealing in air at 800 °C for 2 hours to rutile TiO2 nanofibers. These nanofibers caused light scattering inside the thin film, which improved the optical absorbance.
10 October 2026 in Transactions of the Indian Institute of Metals