An innovative procedure is presented that allows the method of moments (MoM) analysis of large and complex antenna and scattering problems at a reduced memory and CPU cost, bounded within the resources provided by a standard (32 bit) personal computer. The method is based on the separation of the overall geometry into smaller portions, called blocks, and on the degrees of freedom of the field. The blocks need not be electrically unconnected. On each block, basis functions are generated with support on the entire block, that are subsequently used as basis functions for the analysis of the complete structure. Only a small number of these functions is required to obtain an accurate solution; therefore, the overall number of unknowns is drastically reduced with consequent impact on storage and solution time. These entire-domain basis functions are called synthetic functions; they are generated from the solution of the electromagnetic problem for the block in isolation, under excitation by suitably defined sources. The synthetic functions are obtained from the responses to all sources via a procedure based on the singular-value decomposition. Because of the strong reduction of the global number of unknowns, one can store the MoM matrix and afford a direct solution. The method is kernel-free, and can be implemented on existing MoM codes.

Wearable antennas are the vital components for Body Centric Communication (BCC). These antennas have recently gained the attention of researchers and have received a great deal of popularity due to their attractive characteristics and opportunities. They are fundamental in the Wireless Body Area Networks (WBANs) for health care, military, sports, and identification purposes. Compared to traditional antennas, these antennas work in close proximity to the human body, so their performance in terms of return loss, gain, directivity, bandwidth, radiation pattern, efficiency, and Specific Absorption Rate (SAR) is influenced by the coupling and absorption of the human body tissues. Additionally, in the design of these antennas, size, power consumption, and speed can also play a paramount role. In most cases, these antennas are integrated into the clothes, or in some cases, they may be fixed over the skin of the users. When these characteristics are considered, the design of wearable antennas becomes challenging, particularly when textile materials are examined, high conductivity materials are used during the manufacturing process, and various deformation scenarios have an impact on the design’s performance. To enhance the overall performance of the wearable antennas and to reduce the backward radiation towards the human body, metamaterial surfaces are introduced that provide a high degree of isolation from the human body and significantly reduce the SAR. This paper discusses the state-of-the-art wearable/textile/flexible antennas integrated with metamaterial structures composed of wearable/flexible substrate materials, with a focus on single and dual band antenna designs. The paper also reviews the critical design issues, various fabrication techniques, and other factors that need to be considered in the design of wearable/textile/flexible antennas. All the designs presented in this work are of the recent developments in wearable technology.

Topological physics opens up a plethora of exciting phenomena allowing to engineer disorder-robust unidirectional flows of light. Recent advances in topological protection of electromagnetic waves suggest that even richer functionalities can be achieved by realizing topological states of quantum light. This area, however, remains largely uncharted due to the number of experimental challenges. Here, we take an alternative route and design a classical structure based on topolectrical circuits which serves as a simulator of a quantum-optical one-dimensional system featuring the topological state of two photons induced by the effective photon-photon interaction. Employing the correspondence between the eigenstates of the original problem and circuit modes, we use the designed simulator to extract the frequencies of bulk and edge two-photon bound states and evaluate the topological invariant directly from the measurements. Furthermore, we perform a reconstruction of the two-photon probability distribution for the topological state associated with one of the circuit eigenmodes.

In this letter, we demonstrate the gain enhancement of an ultrawideband (UWB) antenna, achieved using an appropriately designed multioctave dual-layer frequency selective surface (FSS) reflector. The proposed novel FSS reflects effectively in phase over a bandwidth of about 120%. Hence, significant enhancement in antenna gain has been achieved with a low-profile configuration without compromising the impedance bandwidth of the UWB antenna. The proposed FSS reflector has a low transmission coefficient and linearly decreasing phase over an ultra-wide frequency band, which is the key requirement for providing an effectively in-phase reflection at the antenna plane. The composite structure is compact, with a total height of λ/4, where λ is the free-space wavelength at the lowest operating frequency of 3 GHz. Experimental results show an impedance bandwidth of 122%. The antenna gain is maintained around 7.5 dBi from 3 to 7 GHz. Between 7-14 GHz, the antenna is more directive with a gain of about 9 dBi with ±0.5 dB variation. Experimental measurements con firm the predicted wideband antenna performance and gain enhancement due to the FSS reflector.

This paper presents a design of multiple input multiple output (MIMO) antenna array for 5G millimeter-wave (mm-wave) communication systems. The proposed MIMO configuration consists of a two antenna arrays combination. Each antenna array consists of four elements which are arranged in an even manner, while two arrays are then assembled with a 90-degree shift with respect to each other. The substrate used is a 0.254 mm thick Rogers RT5880 with a dielectric constant of 2.2 and loss tangent of 0.0009, correspondingly. The proposed MIMO antenna array covers the 37 GHz frequency band, dedicated for 5G millimeter-wave communication applications. The proposed antenna element yields a gain of 6.84 dB, which is enhanced up to 12.8 dB by adopting a four elements array configuration. The proposed MIMO antenna array performance metrics, such as envelope correlation coefficient (ECC) and diversity gain (DG), are observed, which are found to be under the standard threshold. More than 85% of the radiation efficiency of the proposed MIMO antenna array is observed to be within the desired operating frequency band. All the proposed designs are simulated in computer simulation technology (CST) software. Furthermore, the measurements are carried out for the proposed MIMO antenna array, where a good agreement with simulated results is observed. Thus, the proposed design can be a potential candidate for 5G millimeter-wave communication systems.

CubeSats are a class of miniaturized satellites that have become increasingly popular in academia and among hobbyists due to their short development time and low fabrication cost. Their compact size, lightweight characteristics, and ability to form a swarm enables them to communicate directly with one another to inspire new ideas on space exploration, space-based measurements, and implementation of the latest technology. CubeSat missions require specific antenna designs in order to achieve optimal performance and ensure mission success. Over the past two decades, a plethora of antenna designs have been proposed and implemented on CubeSat missions. Several challenges arise when designing CubeSat antennas such as gain, polarization, frequency selection, pointing accuracy, coverage, and deployment mechanisms. While these challenges are strongly related to the restrictions posed by the CubeSat standards, recently, researchers have turned their attention from the reliable and proven whip antenna to more sophisticated antenna designs such as antenna arrays to allow for higher gain and reconfigurable and steerable radiation patterns. This paper provides a comprehensive survey of the antennas used in 120 CubeSat missions from 2003 to 2022 as well as a collection of single-element antennas and antenna arrays that have been proposed in the literature. In addition, we propose a pictorial representation of how to select an antenna for different types of CubeSat missions. To this end, this paper aims is to serve both as an introductory guide on CubeSats antennas for CubeSat enthusiasts and a state of the art for CubeSat designers in this ever-growing field.