This paper presents a design of multiple input multiple output (MIMO) antenna array for 5G millimeter-wave (mm-wave) communication systems. The proposed MIMO configuration consists of a two antenna arrays combination. Each antenna array consists of four elements which are arranged in an even manner, while two arrays are then assembled with a 90-degree shift with respect to each other. The substrate used is a 0.254 mm thick Rogers RT5880 with a dielectric constant of 2.2 and loss tangent of 0.0009, correspondingly. The proposed MIMO antenna array covers the 37 GHz frequency band, dedicated for 5G millimeter-wave communication applications. The proposed antenna element yields a gain of 6.84 dB, which is enhanced up to 12.8 dB by adopting a four elements array configuration. The proposed MIMO antenna array performance metrics, such as envelope correlation coefficient (ECC) and diversity gain (DG), are observed, which are found to be under the standard threshold. More than 85% of the radiation efficiency of the proposed MIMO antenna array is observed to be within the desired operating frequency band. All the proposed designs are simulated in computer simulation technology (CST) software. Furthermore, the measurements are carried out for the proposed MIMO antenna array, where a good agreement with simulated results is observed. Thus, the proposed design can be a potential candidate for 5G millimeter-wave communication systems.

This paper presents a metasurface based multiple-input multiple-output (MIMO) antenna with a wideband operation for millimeter-wave 5G communication systems. The antenna system consists of four elements placed with a 90 degree shift in order to achieve a compact MIMO system while a $2\times 2$ non-uniform metasurface (total four elements) is placed at the back of the MIMO configuration to improve the radiation characteristics of it. The overall size of the MIMO antenna is $24\times 24$ mm ² while the operational bandwidth of the proposed antenna system ranges from 23.5-29.4 GHz. The peak gain achieved by the proposed MIMO antenna is almost 7dB which is further improved up to 10.44 dB by employing a $2\times 2$ metasurface. The total efficiency is also observed more than 80% across the operating band. Apart from this, the MIMO performance metrics such as envelope correlation coefficient (ECC), diversity gain (DG), and channel capacity loss (CCL) are analyzed which demonstrate good characteristics. All the simulations of the proposed design are carried out in computer simulation technology (CST) software, and measured results reveal good agreement with the simulated one which make it a potential contender for the upcoming 5G communication systems.

This paper presents a novel antenna with its array and MIMO configuration for the 5G sub-6 GHz applications. The proposed antenna element operates at the central frequency of 5.57 GHz dedicated for Sub-6 GHz 5G communication applications. The antenna element holds a circular-shaped radiating portion with an inner-circular slot, plus a rectangular slot at its right edge to make the proposed design resonate at the desired frequency band. The RT5880 substrate is used with a thickness of 0.787 mm, and the low-loss tangent of 0.0009. To achieve a desired gain of 12 dB, a four-element array configuration is adopted, which improved a bore side gain to 12.4 dB from 6.66 dB. Then, the two-port configuration is adopted such that the isolation achieved between them is more than −30 dB. The total efficiency of the proposed antenna array is observed to be more than 80% within the operating bandwidth. Moreover, the Specific Absorption Rate (SAR) analysis is also presented for the proposed MIMO configuration, obeying the standard value (i.e., <2 W/kg for any 10 g of tissue). The measured results are in good agreement with the simulated results. All the simulations of the proposed design are performed in the CST MWS software.

The non-existing properties of the metamaterial surfaces can be utilized to improve the antenna radiation characteristics. In this article, a design and performance analysis of a Single Negative (SNG) metamaterial based antenna is imparted for LTE 46/WLAN and Ka-band (like in satellite communication for the receiving side) applications. The unit cell of the metamaterial surface exhibits negative permittivity and positive permeability; yielding a high magnitude positive refractive index, is used to improve and analyze the performance of the proposed monopole antenna element. The proposed SNG based antenna covers a -10 dB bandwidth from 5.35-5.69 GHz (LTE 46/WLAN) and 17.81-20.67 GHz (Ka-band). The total size of the proposed antenna element is 20.2×28.4 mm ² while a 2×3 SNG metamaterial surface is used at the back of the antenna element which improves the gain from 4.52 dB to 9.13 dB for the desired Ka band and 1.17 to 5.04 dB for the LTE 46/WLAN band. Furthermore, for the LTE 46/WLAN frequency band, the impedance matching also gets better, resulting in the return loss improvement from -11 dB to -32.4 dB. Moreover, the radiation efficiency is also improved by more than 10 % for the Ka band after employing the SNG metamaterial surface. The measured results fall in good agreement with the simulated one and make the proposed SNG metamaterial based antenna design competent for the LTE 46/WLAN and Ka-band (like in satellite communication for the receiving side) applications.