This paper reviews the current state of the art in the application of electromagnetic forces to control fluid flow to improve quality in continuous casting of steel slabs. Many product defects are controlled by flow-related phenomena in the mold region, such as slag entrapment due to excessive surface velocity and level fluctuations, meniscus hook defects due to insufficient transport of flow and superheat to the meniscus region, and particle entrapment into the solidification front, which depends on transverse flow across the dendritic interface. Fluid flow also affects heat transfer, solidification, and solute transport, which greatly affect grain structure and internal quality of final steel products. Various electromagnetic systems can affect flow, including static magnetic fields and traveling fields which actively accelerate, slow down, or stir the flow in the mold or strand regions. Optimal electromagnetic effects to control flow depends greatly on the caster geometry and other operating conditions. Previous works on how to operate electromagnetic systems to reduce defects are discussed based on results from plant experiments, validated computational models, and lab scale model experiments.

A new model of particle entrapment during continuous casting of steel is presented, which includes the effects of multiphase flow from argon gas injection and thermal buoyancy from superheat in the strand. The model simulates three different capture mechanisms, including capture by solidified hooks at the meniscus, entrapment between dendrites, and engulfment by the surrounding of large particles. The fluid flow and bubble capture results are validated with plant measurements, including nail board dipping tests and ultrasonic tests, respectively, and good agreement is seen. Results suggest that the superheat has a negligible effect on the flow in the mold region. However, higher (30 K) superheat causes a more complex flow in the lower strand by creating multiple recirculation zones due to the thermal buoyancy effects. This causes less penetration deep into the strand, which leads to fewer and shallower particle captures. Lower (10 K) superheat may enable significant top surface freezing, leading to very large internal defect clusters. Lower superheat also leads to deeper meniscus hooks, which sometimes (0.003%) capture large (1 mm) bubbles. Capture bands occur near the transition line from vertical to curved, due to the downward fluid velocity balancing the particle terminal velocity, enabling capture in the relative stagnation region beneath the longitudinal recirculation zone. These findings agree with plant observations.

Particles in molten steel, including argon-gas bubbles, slag droplets, and non-metallic inclusions, are removed into the surface-slag layer or captured by the solidifying steel-shell during continuous steel casting. Captured particles often become serious defects in the final steel product, so understanding particle-capture mechanisms is important for steel quality. Slab casters often have a straight mold and upper-strand prior to a curved lower-strand. The present work investigates particle capture in such a caster using computational modeling with a standard k-ε model for molten-steel flow, a discrete phase model for inclusion transport, and an advanced capture criterion for inclusion entrapment and engulfment into the steel shell. A new postprocessing methodology is presented and applied to predict inclusion-capture rates in commercial cast product. The locations and size distributions of particles captured into the shell, and actual capture rates are quantified. The model predictions are validated with ultrasonic-test plant measurements of the locations of large particles captured in a steel slab. The results reveal how large-inclusion capture accumulates in the beginning of the curved strand, leading to a capture band in the slab inside radius. Finally, the capture fractions and locations due to all capture mechanisms are compared for different inclusion sizes, and the implications are discussed.

Transverse corner cracks on the slab surface occur most frequently, particularly in hypo-peritectic steel cast by the vertical-bending casters. These defects require additional surface machining before rolling, along with compensating for temperature drops in the reheating furnace, which significantly increases steel production cost. To address this issue, POSCO developed a chamfered mold, which effectively reduced transverse corner cracks when operating at casting speeds below 1.0 m/min. At higher speeds, however, the chamfered mold exacerbated side effects such as longitudinal cracks on chamfered faces. With insights gained from a multiphysics model, it is revealed in this work that these longitudinal cracks are caused by uneven solidification due to excessive gap formation from insufficient taper at the corner in the mold top region. Consequently, a better chamfered mold has been designed to improve taper on both the wide and narrow faces, leading to a reduction in the gap size and associated problems. This new mold is currently being applied to specific high-speed casters with higher cracking rates, and is found to be effective in reducing transverse corner cracks without side effects of longitudinal cracks or excessive mold wear.