Today, in Electric Railways, the old DC supply systems are reaching their limits. To improve their efficiency and increase railroad traffic, a new DC Electrification has recently been proposed at 9-kV. It is now necessary to prepare the migration of infrastructure and rolling stock, using Power-Electronic-Transformers (PETs), for adaptation to this voltage level. For this application, high efficiency and reduced volume are essential. This paper clearly demonstrates that it is now possible to achieve compact, high-power, isolated DC-DC converters using 3.3-kV SiC-MOSFET power modules with high efficiency. After a preliminary study based on simulations, the paper focuses on characterization and implementation of elementary isolated DC-DC converters. The proposed topology is a series-resonant converter rated for a nominal power of 300-kW at 1.8-kV. First, laboratory testing using an “opposition-method” is used to evaluate the elementary converters up to their nominal power using both electrical and thermal measurements to accurately determine losses and efficiency. At the nominal output power, an efficiency of 98.93% is obtained. This is quite remarkable for an isolated DC-DC converter operating under 1.8-kV with a switching frequency of 15-kHz. Finally, two elementary isolated DC/DC converters are associated in ISOP configuration (Input Seriesed/Output Paralleled) in order to achieve a 3-kV/1.5-kV PET with a nominal power of 600-kW as a prelude to the final 9-kV/1.5-kV power conversion.
Face aux enjeux énergétiques actuels, l’électronique de puissance est un domaine de recherche de premier plan. La relative fragilité des composants présents dans les chaînes de conversion implique néanmoins de devoir prendre en compte la gestion des défaillances dès la phase de conception. La défaillance d'un composant est une situation hautement critique tant sur le plan de la sécurité environnante que sur le plan de l'indisponibilité du système qui en découle. Cette problématique de sûreté de fonctionnement constitue la ligne directive de ce travail de thèse, visant à imaginer, et concevoir des solutions permettant de sécuriser ces structures en présence de défauts. Dans cette thèse, nous étudions de nouveaux composants magnétiques offrant un excellent compromis entre la densité de puissance traitée et rendement de conversion, mais très sensibles à toutes perturbations électriques. Une méthode de pré-dimensionnement des composants magnétiques a été développée et des solutions ont été apportés pour sécuriser et maintenir le fonctionnement de la chaîne de conversion suite à l’apparition de plusieurs défauts.
This paper investigates a parallel multilevel current source inverter (CSI) for low-voltage to medium-voltage (LV/MV) photovoltaic (PV) power conversion based on 3.3 kV SiC MOSFET and dedicated space vector modulation (SVM) schemes. A design-oriented sizing tool is developed to evaluate semiconductor losses, junction temperatures, and conversion efficiency across the full maximum power point voltage () range (≈850–1450 V) of a open-circuit voltage () PV string for three-, five-, and seven-level configurations, accounting for synchronous rectification mode (SRM) constraints, whereas experimental validation was performed exclusively on a two-block (five-level) prototype. Numerical analysis demonstrates that power building block shedding (PBBS), i.e., the sequential activation of parallel CSI matrices, improves European efficiency by approximately 0.19% in this specific configuration compared to the defined seven-level operation while maintaining device junction temperatures within acceptable thermal limits. A CL output filter is sized to target WTHD below 3% over the operating envelope. A two-block (five-level) prototype demonstrates LV/MV conversion up to approximately 4.2 kW, validating the proposed SVM sequence. Since experimental operation was conducted under worst-case conduction losses (non-SRM) due to testbench safety constraints, a full performance evaluation could not be completed at this stage.