Ranjith Punathil Meethal

Dr. Ranjith Punathil Meethal

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 March 2018 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
RMRanjith Punathil Meethal
Ranjith Punathil Meethal
MRMandula Tirumala Rao
Mandula Tirumala Rao
SSSanjeev Sapra
Sanjeev Sapra
ISIan Ivar Suni
Ian Ivar Suni
RSRamanathan Srinivasan
Ramanathan Srinivasan
Ta and Nb are group V valve metals which resist corrosion. Anodic dissolution of Ta and Nb in acidic fluoride media of varying HF concentration is investigated using potentiodynamic polarization and electrochemical impedance spectroscopy. Polarization curves showed a clear active and passive region in all the solutions employed in this study. At a given HF concentration, Nb anodic polarization currents are larger compared to those of Ta. EIS of Ta and Nb exhibited a low frequency capacitive loop in active region, and a low frequency negative differential resistance in the passive region. The surface of Ta and Nb was characterized using XPS, and it reveals the presence of both sub oxide and pentoxide. The electrochemical results could be explained by a four step mechanism involving sub-oxide and pentoxide intermediates. The analysis shows that direct dissolution of sub-oxide occurs via an electrochemical pathway and is facilitated by HF−2 species and HF in undissociated form. On the other hand, chemical dissolution of pentoxide, which occurs in parallel, is facilitated by the HF species in undissociated form.

6 April 2019 in Transactions of the Indian Institute of Metals
Verified
Journal Article
Open access
PDF file
JJJ. Jayaraj
J. Jayaraj
RMRanjith Punathil Meethal
Ranjith Punathil Meethal
SNS. Ningshen
S. Ningshen
SRS. Ramanathan
S. Ramanathan
Titanium (Ti) is a lustrous transition metal which possesses excellent corrosion resistance in several aggressive environments but is attacked by acidic fluoride media. In this work, the addition of fluoride ion to nitric acid on the corrosion behavior of Ti and air-oxidized Ti was studied. Air oxidation of Ti at 800 °C for 5 h resulted in the formation of an intact rutile TiO2 layer with a thickness of about 35 μm. The corrosion resistance was investigated from the polarization resistance (\(R_{\text{P}}\)) values which were obtained from linear polarization and electrochemical impedance spectroscopy (EIS) measurements. A decrease in the \(R_{\text{P}}\) value of Ti with the addition of fluoride ion in nitric acid was observed, and this indicated the formation of an unstable layer, which resulted in accelerated dissolution. The several order increase in the \(R_{\text{P}}\) value of air-oxidized Ti in nitric acid containing fluoride ions pointed the improved resistance to corrosion. The diffusivity of species through the air-oxidized TiO2 layer was estimated from the electrochemical equivalent circuit (EEC) analysis of EIS data. Even though the diffusivity increased by several orders with the addition of fluoride ions, air-oxidized Ti provided better protection against nitric acid containing fluoride ions than Ti. The corrosion rates of Ti and air-oxidized Ti in boiling nitric acid containing fluoride ions were also estimated from weight loss experiments. Even in boiling fluorinated nitric acid, air-oxidized Ti provided better corrosion protection, with corrosion rates of about 1000 times less than that of Ti.

1 August 2022 in ECS Journal of Solid State Science and Technology
Verified
Journal Article
Closed access
PJPalwasha Jalalzai
Palwasha Jalalzai
HRHeon-Yul Ryu
Heon-Yul Ryu
SSSamrina Sahir
Samrina Sahir
RMRanjith Punathil Meethal
Ranjith Punathil Meethal
SHSatomi Hamada
Satomi Hamada
JPJin-Goo Park
Jin-Goo Park
The stability of the cobalt surface after the CMP process is crucial to prevent the corrosion of the surface during the wafer transfer step. The stability of the Co-BTA complex is investigated in this work by using various experimental and surface analysis techniques. The higher inhibition efficiency of the Co-BTA complex observed at pH 7 was further investigated, and a more passive Co surface was observed during the de-ionized water (DIW) rinsing step. The low stability of the Co-BTA complex in the presence of slurry additives was confirmed from the accelerated oxidative dissolution of the Co surface compared to the adsorption of BTA. Ex-situ electrochemical impedance spectroscopy (EIS) was further performed to analyze the stability of the Co-BTA complex to confirm the passivation of Co during the DIW rinsing step. The corrosion resistance of the Co surface during the rinsing step is further enhanced by reducing the dissolved oxygen content.

5 January 2020 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
TRTirumala Mandula Rao
Tirumala Mandula Rao
RMRanjith Punathil Meethal
Ranjith Punathil Meethal
MAM S Amrutha
M S Amrutha
RSRamanathan Srinivasan
Ramanathan Srinivasan
Dissolution rates of Ti, Zr, Nb and Ta in acidic fluoride media of different concentrations at various temperatures were measured by weight loss method, and were complemented by electrochemical measurements at room temperatures. A mathematical model to estimate the corrosion rate of these four valve metals based on the overall reaction mechanism for metal dissolution as well as H2 evolution is developed from the weight loss experiments. Valve metal dissolution process occurs through two independent pathways assisted by (HF2)− and equilibrium HF species. Except Ti, the dissolution of other valve metals studied are not significantly influenced by the H2 evolution reaction. Among the four metals evaluated, Nb offers the best corrosion resistance at high temperature and high HF concentration. The corrosion resistance of all four valve metals estimated from linear polarization, electrochemical spectroscopy and Tafel extrapolation in various concentrations of solutions match well. For Ti, dissolution rates calculated from Tafel extrapolation were lower than those based on weight loss experiments, while for Zr, Nb and Ta, they were mostly higher than those based on weight loss experiments.

5 May 2022
Verified
Book Chapter
Closed access
PDF file
RSRamanathan Srinivasan
Ramanathan Srinivasan
RMRanjith Punathil Meethal
Ranjith Punathil Meethal

13 June 2025 in Surfaces and Interfaces
Verified
Journal Article
Closed access
PJPalwasha Jalalzai
Palwasha Jalalzai
SKSumit Kumar
Sumit Kumar
RMRanjith Punathil Meethal
Ranjith Punathil Meethal
KHKwang-Min Han
Kwang-Min Han
AKAndreas Klipp
Andreas Klipp
JPJin-Goo Park
Jin-Goo Park