Grindability of a coal is generally represented in terms of the Hard Groove Grindability Index (HGI); a coal of lower HGI needs more energy to be ground. Samples of this study were taken from the Amasra coalfield of the Zonguldak Hard Coal Basin to determine if coal grindability varies with the burial depth of coals. Samples from different burial depths were analyzed and corresponding HGI values were obtained. HGI values of the original samples were found between 51.43 and 79.26. A float-and-sink analysis was performed for some of the original samples and it was found that the HGI values of floated coal samples change between 49.04 and 73.52. A new method, which employs proximate and petrographic analysis data and the burial depth, was proposed for the prediction of HGI. Correlation of HGI with burial depth or the discrimination of floated and original coal currently exists. Correlations of the proposed methods have satisfactory coefficient of determination values (R2 =.75, R2 = .86) for the original and floated coal samples studied. This new proposed method was tested on the data and the previously studied original and floated coal samples of the Zonguldak coalfield and yielded a good correlation (R2 = .87, R2 = .90). The proposed method can be considered to yield reasonable predictions for the Amasra coalfield.
13 June 2016 in International Journal of Coal Preparation and Utilization
An empirical relationship of the Hardgrove Grindability Index (HGI) was established in terms of breakage parameters. In order to model particle-breakage behavior in a crusher, breakage parameters and HGI of material should be taken into consideration. Coal grindability has long been studied and empirical equations evaluating coal characteristics data have been proposed. Basically knowing the size distribution of the feed coal to the crusher and obtaining an experimental product size distribution after processing could help to model the operation conditions of the device. Breakage processes for coal have been modelled namely as π-breakage process, π, κ-breakage process and π, κ, ω-breakage process (π: proportion selected for breakage in an assembly, κ: number of breakage in a breakage operation ω: coefficient of size dependence). Having evaluated the breakage model for any crusher, the size distribution of crushed coal and its HGI could be related to each other. An empirical method between HGI and π proposed in this study was in good agreement with the experimental results. Experimental analysis of the crusher feed coal yielded an average HGI of 66 and the predicted HGI values were in the range of ± 10% of this average by employing the proposed method. As a second contribution of the proposed method, the stabilization of the size distribution of the crushed coal can be achieved with a decision mechanism for the plant operators about communition process.
Traditional way for energy production is coal-fired power plants. Change in coal characteristics would result in change in ash properties (ash fusion temperatures, ash elemental composition) as expected and would finally and possibly result in slagging or fouling problems inside the boiler. The high temperature of combustion process and a low melting point of ash or vice versa might be considered as the main reason of these above-mentioned problems. In this study, 24 coal samples either low-grade Turkish coals or imported steam coals were collected and analysed in terms of their proximate analysis and the ash samples corresponding each parent coal were analysed in terms of elemental composition along with ash melting temperatures. Proximate analysis of each coal was performed in the order of characterisation. As regards to ash melting temperatures (AFTs), ash chemical composition contribution was deeply discussed. Still, in order to figure out what has a dominant role in terms of ash fusion temperatures (AFTs), coal and ash properties were taken into consideration at the same time. A model was proposed to predict AFTs by employing parameters of ash chemical composition and coal characteristics. The proposed model was not only user-friendly but also it is in good agreement with experimental results (R2 = 0.71, R2 = 0.77, R2 = 0.84, R2= 0.88; DT, HT, ST and FT, respectively).
Gas adsorption capacity of coals is one of basic characteristics of coal. Oxygen adsorbed by coal leads to spontaneous combustion. The adsorption capacitie
Gas content and spontaneous combustion susceptibility of coals are among the most important issues to be considered in underground coal mining operations i
13 March 2020 in Journal of Energy Resources Technology