The Caspe geological structure was formed by the convergence of the Iberian Range and the Catalonian Coastal Range, during the Tertiary compression. Traditionally, the Caspe structure has been interpreted from seismic profiles without considering surface structural data. The aim of this study is to build a 3D geological model taking into account the structural data from the geological map, stress fields and lineaments, and evaluate its possibility as potential CO2 storage site. Four surfaces have been modelled: Buntsandstein Top, Muschelkalk-I Top, Muschelkalk-II Top and Cenozoic Bottom. Considering the geometry and depth for storage the target reservoir was considered to be the Buntsandstein facies. The available seismic data indicate that the Buntsandstein facies top is at approximately 500 m depth and hosts a deep saline aquifer. The target reservoir series include the conglomerate and sandstone of the Hoz del Gallo and Cañizar Fms (Buntsandstein Facies) with an average thickness of 500 m and 21% porosity. The seal comprises the shales and silts of the Röt Fm with an average thickness of 100-150 m. The structure volume was calculated based on the -500 mbsl for the Buntsandstein top deepest closed contour lines. The estimated volume is 5,800 Mm3 with most of CO2 in gaseous state.Financial support for this study was received from the Spanish administration through the Instituto para la Reestructuración de la Minería del Carbón y el Desarrollo Alternativo de las Comarcas Mineras (IRMC).Peer reviewe
18 August 2022 in Geological Society, London, Special Publications
One of the main challenges facing geological storage is to identify cost-effective methodological workflows for characterizing and monitoring geological storage sites. In the framework of the ALGECO2 project, led by the IGME (Geological and Mining Institute, Spain), a preliminary study of the Lopín site in the NE of Spain indicated conditions were promising for geological storage of CO 2 . However, the poor quality of the legacy seismic reflection data precluded thorough characterization. Within the H2020 PilotSTRATEGY project, one of the possible selected target reservoirs was the Lopín structure. In order to characterize its geometry and physical properties as required to properly evaluate its storage potential, IGME applied a new emerging methodology that integrates reinterpreted reflection seismic data with newly acquired and interpreted gravity, passive seismic and petrophysical data. This methodology was successfully applied along one seismic profile. In this paper, we present the results of this integration as the first step towards characterizing the site and evaluating its suitability for storage.