This paper investigates the influences of three different input parameters, such as feed rate, insert nose radius, and insert coating methods, in the turning operation of Inconel 718. The coating methods were selected as medium temperature chemical vapor deposition (MT-CVD) and physical vapor deposition (PVD) and in addition to coating methods, the role of various coating materials was discussed since the inserts were coated with multi-layers of TiCN/Al2O3/TiN and single-layer of TiAlN on carbide substrates. The results were discussed in terms of wear behavior of cutting tools and surface quality of the workpiece, which is indicated by surface roughness. A full factorial experimental design was employed in the present work and the results were evaluated using main effects plots. Furthermore, the analysis of variance (ANOVA) method was applied to specify both reactive and non-reactive effects of experimental parameter reactions. The results showed that surface roughness is reduced using low feed rates and large nosed inserts in the operations. Furthermore, TiAlN-coated inserts with PVD method provided better surface finish than with MT-CVD method. It was also found that surface roughness increases as the wear rate of inserts increases.
Bu bildiride, sivil araç zırhlaması üzerine yapılan araştırmalar ve bu alanda kullanılmak üzere tasarlanan seramik kompozit bir zırhın balistik test sonuçları sunulmuştur. Günümüzün farklı mühimmat tehdit seviyelerine karşı askeri araçlarda olduğu gibi sivil araçlarda da zırhlama çok önemli bir konu haline gelmiştir. Ayrıca ağırlığın çok önemli bir tasarım kriteri olması nedeniyle hafif zırh sistemlerine olan talep de artmaktadır. Ağırlık, aracın yakıt tüketimini, motor gücünü ve ilgili diğer sistem gereksinimlerini artırır ve manevra kabiliyetini azaltır. Çalışmada sunulan bağımsız zırh, sivil araçlarda kullanılmak üzere geliştirilmiş ve zırh panelinin ağırlık kazancı, Ultra Yüksek Sertlikli (UHH) zırh çelikleri (Armox 600T ve Armox Advance) ile karşılaştırılmıştır. Geliştirilen zırh, darbe yüzünde alümina (Al2O3) seramik karolardan ve son katmanda Ultra Yüksek Moleküler Ağırlıklı Polietilen (UHWMPE) kompozit destek plakasından oluşmaktadır ve 7.62 mm x 51 M61 AP mermiye karşı test edilmiştir. Hafif zırh panelinin beş atıştan sonra yapısal bütünlüğünü koruduğu gözlemlenmiştir. Geliştirilen zırh panelinin sivil zırhlı araçlar için 7.62 mm zırh delici mühimmatlara karşı hafif ve uygun maliyetli çözüm sağladığı değerlendirilmektedir.