Parylene C has been widely used in the fields of microelectromechanical systems (MEMS) and electronic device encapsulation because of its unique properties, such as biocompatibility and conformal coverage. However, its poor adhesion and low thermal stability limit its use in a wider range of applications. This study proposes a novel method for improving the thermal stability and enhancing the adhesion between Parylene and Si by copolymerizing Parylene C with Parylene F. The successful preparation of Parylene copolymer films containing different ratios of Parylene C and Parylene F was confirmed using Fourier-transform infrared spectroscopy and surface energy calculations. The proposed method resulted in the copolymer film having an adhesion 10.4 times stronger than that of the Parylene C homopolymer film. Furthermore, the friction coefficients and cell culture capability of the Parylene copolymer films were tested. The results indicated no degradation compared with the Parylene C homopolymer film. This copolymerization method significantly expands the applications of Parylene materials.
4 March 2022 in Journal of Micromechanics and Microengineering
Parylene C is a commonly used polymer in the micro-electromechanical systems (MEMS) field because of its excellent barrier property and process compatibility with other microfabrications. Whereas, the poor adhesion of other materials to Parylene C is the urgent challenge that restricts its real applications. This work proposed a strategy to enhance the adhesion between Parylene C or metals and the Parylene C substrate. A short-time oxygen plasma reaction ion etching process with ambient titanium in the etching chamber is introduced between the first layer of Parylene C film deposition (the substrate) and the second Parylene C or metal coatings. Parylene C nanostructures (nanograss) are generated on the substrate because of the oxygen plasma bombarding with sputtered titanium nanoparticles as nanomasks. Different feature sizes of nanograss were successfully obtained by tuning the RF power, oxygen flow rate and etching times. Scanning electron microscopy images showed that both the nanograss density and height (0.61 ± 0.02 μm–0.76 ± 0.03 μm) were positively proportional to the etching time with low RF power (150 W) and oxygen flowrates (60 sscm). Scratch tests are conducted after the second layer of Parylene C or metal coatings to quantitively analyze the adhesion enhancement. The results indicated that the adhesion of both Parylene C and metal on the Parylene C substrate with nanograss structures were enhanced up to around 7 and 15 times, respectively, compared to those on untreated substrates. This nanograss technique-based adhesion enhancement approach is easy-to-realize, robust, chemical-free, precisely controllable, thereby holds promising potentials in various Parylene MEMS applications.
With the rapid development of flexible electronics, an increasing number of microfabrication strategies originating from the Si-based integrated circuits field have been explored on organic materials. Parylene C, a polymer, has been widely used in the microelectromechanical systems field because of its outstanding fabrication merits, such as room-temperature processability, conformal coating, and precise thin film deposition capability with the thickness tunable from 1 nm to 100 μ m. As a good dielectric material, the Parylene C is also suitable for interlayer dielectrics in flexible electronics. This study develops an optimized chemical mechanical polishing (CMP) technique of Parylene C for high-density redistribution wiring in high-performance flexible electronics. The roughness of the Parylene C surface after CMP was as low as 14.3 ± 1.5 Å. The problems of slurry pollution and mechanical failure of the Parylene film that degrade the dielectric performance of the Parylene C could be avoided by taking the optimized CMP method. The multi-material structure constructed by Parylene C, Silicon and electroplated Copper was prepared and polished using the optimized CMP process. Additionally, a flexible wiring sample has been successfully patterned by the Damascene process through the optimized CMP process. In this sample, both the distance between each wire and the wire width were as small as 5 μ m. The optimized Parylene C CMP process is easy-to-realize, highly efficient, low cost, and with minor defects; it provides a promising way to achieve high-density interconnection in high-performance flexible electronic devices.
The efficient isolation and molecular analysis of circulating tumor cells (CTCs) from whole blood at single‐cell level are crucial for understanding tumor metastasis and developing personalized treatments. The viability of isolated cells is the key prerequisite for the downstream molecular analysis, especially for RNA sequencing. This study develops a laser‐induced forward transfer ‐assisted microfiltration system (LIFT‐AMFS) for high‐viability CTC enrichment and retrieval from whole blood. The LIFT‐compatible double‐stepped microfilter (DSMF), central to this system, comprises two micropore layers: the lower layer's smaller micropores facilitate size‐based cell separation, and the upper layer's larger micropores enable liquid encapsulating captured cells. By optimizing the design of the DSMFs, the system has a capture efficiency of 88% at the processing throughput of up to 15.0 mL min−1 during the microfilter‐based size screening stage, with a single‐cell yield of over 95% during the retrieval stage. The retrieved single cells, with high viability, are qualified for ex vivo culture and direct RNA sequencing. The cDNA yield from isolated CTCs surpassed 4.5 ng, sufficient for library construction. All single‐cell sequencing data exhibited Q30 scores above 95.92%. The LIFT‐AMFS shows promise in cellular and biomedical research.
29 November 2022 in Journal of Microelectromechanical Systems
High-performance stretchable electronics are attracting great attention due to the mechanical adaptability, but are still limited to achieving highly-integrable, high density, high-performance stretchable silicon-based electronics. This paper proposed a Parylene Kirigami structure as a stretchable interconnection to connect silicon (Si) units in an array. The equivalent Young’s modulus and stretchability model of the Parylene Kirigami were developed and verified numerically and experimentally. As a preliminary demonstration, a Parylene Kirigami structure-based stretchable Si array (Parylene KiSS array) was successfully fabricated by the wafer-scale microelectromechanical systems (MEMS) process with a high Si areal coverage of 68.8 % and the stretchability of 31.0 $\pm$ 1.1%. The equivalent Young’s modulus of this Parylene KiSS array was 130.88 $\pm$ 6.75 MPa, which was estimated precisely by the proposed model and was around 1000 times smaller than that of the intrinsic silicon. This MEMS process compatible stretchable electronics strategy can integrate Si-based high-performance chiplets, sensors and actuators to realize high-performance stretchable microsystems. 2022-0157