Increasing [F−] of the electrolyte resulted in an increase of both the length and diameter of TiO2NTs, which further improved the photocurrent response and the photodecolorization of RhB.
Modified TiO2 nanotubes (NTs) have been widely used in water splitting for hydrogen evolution owing to their excellent photocatalytic properties. Here, Cu2O nanoparticle-decorated TiO2 NTs were fabricated via electrochemical deposition, and its performance was investigated.
1 December 2016 in Russian Journal of Applied Chemistry
The photocatalytic oxidative desulfurization is one of the promising processes to realize the deep desulfurization of the fuel. A series of TiO2 nanoparticles (TiO2 NPs) were prepared to investigate the effect of annealing temperatures on its physical properties and the photocatalytic oxidative desulfurization performance. Their physicochemical properties were investigated by X–ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), thermal gravimetric and differential thermal analysis (TG–DTA), scanning electron microscopy (SEM), and X–ray energy dispersive spectrometer (EDS). The results show that, the crystallite structure of TiO2 NPs annealed at 250–450°C was mainly composed of anatase phase. The rutile phase appeared when the anneal temperature increased to 550°C and all of the anatase converted into rutile phase when annealed at 750°C. The effect of crystallite structure of TiO2 on its photocatalytic oxidative desulfurization performance was investigated using benzothiophene (BT) as the model sulfur compound. The anatase phase was preferable for the photocatalytic oxidation of BT. Phase transfer catalyst plays an important role for improving the photocatalytic desulfurization rate. The photocatalytic oxidative reaction mechanism was also proposed in the presence of TiO2 as catalyst, H2O2 as oxidant, and the DMDAAC as phase transfer catalyst. In the heterogeneous catalytic system, the entire reaction rate is mainly determined by the oxidation reaction and the extraction process, in which the oxidation process could be the rate determining step.
Manganese-based oxides with good redox properties exhibit high soot oxidation activity. To further enhance their catalytic performance, introducing additional metal elements into manganese-based oxides is considered an effective approach. Herein, two rare earth elements (Sm and Ce)-modified MnOx catalysts were prepared by the co-precipitation method. The synthesized MnOx catalyst primarily consists of the Mn3O4 phase, with trace amounts of Mn5O8. The addition of Sm or Ce maintains the predominance of the Mn3O4 phase, increases the proportion of Mn5O8, and enhances the redox properties, thereby boosting the catalytic activity for NO and soot oxidation. Notably, the coexistence of Sm and Ce achieves optimal soot oxidation activity, with T10 reaching 306 °C. Comprehensive physicochemical characterization elucidates the underlying structure–performance relationships of these catalysts.