Manganese oxides (MnOx) have attracted particular attention in the selective catalytic reduction of NOx with NH3 (NH3-SCR) because of their excellent low-temperature activity. Herein, we prepared a highly efficient MnO2 (MnO2-M) catalyst through a facile ball milling-assisted redox strategy. MnO2-M shows a 90% NOx conversion in a wide operating temperature window of 75–200 °C under a gas hourly space velocity of 40,000 h−1, which is much more active than the MnO2 catalyst prepared by the redox method without the ball-milling process. Moreover, MnO2-M exhibits better H2O and SO2 resistance. The enhanced catalytic properties of MnO2-M originated from the high surface area, abundant oxygen vacancies, more acid sites, and higher Mn4+ content induced by the ball-milling process. In situ DRIFTS studies probed the reaction intermediates, and the SCR reaction was deduced to proceed via the typical Eley–Rideal mechanism. This work provides a facile method to enhance the catalytic performance of Mn-based catalysts for low-temperature denitrification and deep insights into the NH3-SCR reaction process.
Manganese-based oxides with good redox properties exhibit high soot oxidation activity. To further enhance their catalytic performance, introducing additional metal elements into manganese-based oxides is considered an effective approach. Herein, two rare earth elements (Sm and Ce)-modified MnOx catalysts were prepared by the co-precipitation method. The synthesized MnOx catalyst primarily consists of the Mn3O4 phase, with trace amounts of Mn5O8. The addition of Sm or Ce maintains the predominance of the Mn3O4 phase, increases the proportion of Mn5O8, and enhances the redox properties, thereby boosting the catalytic activity for NO and soot oxidation. Notably, the coexistence of Sm and Ce achieves optimal soot oxidation activity, with T10 reaching 306 °C. Comprehensive physicochemical characterization elucidates the underlying structure–performance relationships of these catalysts.
A series of Ag-modified manganese-mullite (SmMn2O5) catalysts with different Ag contents (1, 3, and 6 wt.%) were prepared via a citric acid sol–gel method for catalytic soot oxidation. The catalysts were characterized by powder X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Raman spectroscopy, transmission electron microscopy (TEM), high-resolution transmission electron microscopy analysis (HRTEM), X-ray photoelectron spectroscopy (XPS), and H2 temperature-programmed reduction (H2-TPR). The soot oxidation activity of the mullite was significantly promoted by the addition of silver and affected by the loading amount of the metal. Herein, the influences of silver loading on the metal size distribution and its interactions with the mullite were studied. Based on these characterizations, a possible soot oxidation reaction mechanism was proposed for silver-modified SmMn2O5.
13 October 2024 in Industrial & Engineering Chemistry Research
Two Mn0.15Ce0.85O2−δ mixed oxides were synthesized by a co-precipitation method using Mn(NO3)2 and KMnO4 as the manganese precursors, respectively. Structural analyses by X-ray powder diffraction and Raman spectroscopy reveal the formation of MnOx-CeO2 solid solutions. The Mn0.15Ce0.85O2−δ catalyst prepared from the high-valent manganese precursor exhibits higher activity for the catalytic oxidation of NO. The advantage of KMnO4 is related to the improved redox property of the catalyst as supported by H2 temperature-programmed reduction (TPR) and O2 temperature-programmed desorption (TPD). The Mn-Ce interactions create more Mn4+, Ce3+ and oxygen vacancies on the KMnO4-synthesized mixed oxides based on the Raman and X-ray photoelectron spectra (XPS).
15 January 2026 in Industrial & Engineering Chemistry Research