Zheng Dong

Dr. Zheng Dong


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 April 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XLXiaolu Lucia Li
Xiaolu Lucia Li
ZDZheng Dong
Zheng Dong
CTChi K. Tse
Chi K. Tse
DLDylan Lu
Dylan Lu
Multi-input multi-output (MIMO) DC-DC converters can integrate multiple input sources and output loads simultaneously. This paper proposes a new single-inductor MIMO DC-DC converter with a wide conversion ratio. The proposed converter allows input sources to be added or removed seamlessly with no cross-regulation problem. Meanwhile, the outputs are independently controlled, i.e., the load change at one output cell will not affect the other interconnected output cells. Constant current control is the main control requirement. When constant current control is applied to all input cells, the power provided by each input source is proportional to the voltage magnitude of the source. When the constant current control is applied to some of the input cells, the input sources with direct duty-cycle controlled input cells can provide specific power through controlling the duty cycles of the switches of the corresponding input cells. Moreover, the switching time of switches is irrelevant. Therefore, it is easy to realize the high extension capability for arbitrary inputs/outputs. A dual-input dual-output prototype is constructed to illustrate the performance of the proposed converter. The corresponding component design is presented.

25 May 2022 in Symmetry
Verified
Journal Article
Open access
PDF file
ZDZheng Dong
Zheng Dong
ZZZhenbin Zhang
Zhenbin Zhang
ZLZhen Li
Zhen Li
XLXuming Li
Xuming Li
JQJiawang Qin
Jiawang Qin
WQWang Rui Qi
Wang Rui Qi
A hybrid energy-storage system (HESS), which fully utilizes the durability of energy-oriented storage devices and the rapidity of power-oriented storage devices, is an efficient solution to managing energy and power legitimately and symmetrically. Hence, research into these systems is drawing more attention with substantial findings. A battery–supercapacitor hybrid energy-storage system (BS-HESS) is widely adopted in the fields of renewable energy integration, smart- and micro-grids, energy integration systems, etc. Focusing on the BS-HESS, in this work we present a comprehensive survey including technologies of the battery management system (BMS), power conversion system (PCS), energy management system (EMS), predictive control techniques of the underlying system, application and cost-effective feasibility aspects, etc. This work reflects strong symmetry on different aspects of designing an HESS, and provides guidelines and design references for the research and application of an HESS.

9 March 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
FXFei Xu
Fei Xu
JLJunwei Liu
Junwei Liu
ZDZheng Dong
Zheng Dong
Significant improvement in the power efficiency of dual-active-bridge dc–dc converters can be achieved by implementing zero voltage switching (ZVS) which is facilitated by a negative switch current at the switching instant. Such negative current, however, causes undesirable backflow power that counteracts the efficiency gain. Thus, the conditions for achieving ZVS and maintaining minimum backflow power (MBP) are often conflicting. A design that implements ZVS and MBP simultaneously is, thus, desirable. While, existing research is short of exploring the accurate condition of MBP and ZVS. This work fully considers the influence of output capacitance of power switches on ZVS and tries to implement ZVS and MBP of a dual-active-bridge dc–dc converter by controlling the inductor current to a minimum value at the turn- off instant of a power switch. The expression of the minimum switching current for ZVS and MBP is first derived by considering the resonant transient process in dead time. The transmission power range with ZVS and MBP can be maximized by selecting appropriate voltage conversion ratio according to different values of minimum current. An optimal extended phase-shift control for enlarging the operating region for ZVS and MBP of a dual-active-bridge dc–dc converter is designed. The optimization method is experimentally verified.

30 April 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
ZDZheng Dong
Zheng Dong
CTChi K. Tse
Chi K. Tse
SHS. Y. Ron Hui
S. Y. Ron Hui
Single-inductor multiple-output (SIMO) light-emitting diode (LED) drivers have the advantages of being compact, efficient, and low cost. However, the voltage-to-current transfer function of each output of the SIMO converter is not independent, with significant cross regulation issues that necessitate the use of complex closed-loop control for achieving independent dimming function. This paper proposes a current-source-mode (CSM) SIMO dc-dc converter from duality principle, which is shown to be more suited for LED driving due to widened control range of the duty cycle and inherently inductor-less LED driving topology. The outputs of the CSM SIMO dc-dc converter are inherently independent, resulting in very simple control requirement involving only one closed-loop controller for providing the constant current feeder, and several simple open-loop controllers for independent dimmable driving of LEDs. Simultaneous voltage step-up and step-down of multiple outputs is an added feature that simplifies the input power source requirement, especially for portable applications. The whole system is simple, reliable, and low cost. Taking the CSM single-inductor dual-output dc-dc converter as an example, we illustrate the circuit operation and establish a small-signal model for facilitating the design of the feedback control. A direct duty-cycle dimming method is described. Experimental tests are presented for verification.

29 June 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XLXuming Li
Xuming Li
ZDZheng Dong
Zheng Dong
YCYan Cao
Yan Cao
JQJiawang Qin
Jiawang Qin
ZZZhenbin Zhang
Zhenbin Zhang
RWRuiqi Wang
Ruiqi Wang
Dual-active-bridge (DAB) converters are widely used in power conversion systems as interfaces. To operate under high-power, high-voltage, or high-current conditions, systems constructed by multiple series–parallel DAB modules are promising solutions. Model-predictive control (MPC) is suitable for controlling complex structures such as multiple DAB converters, as it offers advantages, such as ease of multiobjective optimization, simple controller parameter design, and ease of expansion, and shows excellent dynamic performance. However, MPC applied to multiple DAB converters cannot precisely achieve target tracking and power balancing due to its high dependence on model accuracy. In this article, we investigate all four types of connections of multiple DAB modules with corresponding MPC schemes, focusing on both the single and multiple DAB modules. We analyze the errors of output voltage and power distribution caused by mismatches between model and circuit parameters. Based on this analysis, we propose integrating a recursive least squares algorithm into MPC to control multiple DAB modules and achieve accurate real-time identification of key parameters. This approach significantly improves the output accuracy and the power-balancing ability under MPC with parameter mismatches, without adding extra cost. Finally, we demonstrate the effectiveness of our proposed method through experimental platforms built to show the impact of parameter mismatches of multiple DAB modules under MPC. Our results validate the ability of the proposed approach to: 1) achieve satisfactory dynamic performance; 2) precisely track the control target; and 3) accurately balance the power of each module even under parameter mismatch conditions.

1 August 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
ZDZheng Dong
Zheng Dong
CTChi K. Tse
Chi K. Tse
SHS. Y. Ron Hui
S. Y. Ron Hui
Light-emitting diodes (LEDs) are solid-state devices with specific v-i characteristics. In this paper, we study the basic requirement of the driving circuits and discuss the proper approach to drive LEDs in view of their characteristics. We compare voltage source driving and current source driving, and discuss their relative advantages and constraints. We specifically introduce the use of circuit duality principle for developing new current-source-mode (CSM) drivers that are less known but are theoretically more versatile compared to their conventional voltage-source-mode counterparts. The study highlights the effects of the choice of driving circuits in terms of the number and size of circuit components used, duty cycle variation, sensitivity of control, nonlinearity and control complexity of LED drivers. We propose a CSM single-inductor multiple-output (SIMO) converter, which demonstrates the advantage of having inductorless and easily controlled current-source drivers, and present a comparison of the CSM SIMO converter with the existing SIMO converters. We further illustrate that a high-voltage-step-down ratio can be naturally achieved by the CSM high-voltage-step-down converter without the use of transformers. This paper presents a systematic and comparative exposition of the circuit theory of driving LEDs, with experimental evidence supporting the major conclusions.