Increasing the energy efficiency in the residential and public buildings is an object of observation and impact not only on national level but also on international as well. In the recent years a number of normative documents, measurements for support and financing in this direction have been accepted in Bulgaria. According to Eurostat’s data, the buildings and more especially the residential buildings are the one which have the highest energy consumption in the EU, followed by the transport and industry sectors. The households are the sector with the greatest potential for energy savings in Europe, for them 79% of the total energy consumption is due to the heating and the hot water mainly. The energy savings from building renovations are usually result from improvement of the insulation, heating and cooling systems and electric light. In the present article an experimental study was made to establish the dependence of the heat transfer coefficient in the different schemes of connections on the radiators in order to optimize it and achieving more complete absorption of the supplied heat energy. This research was made within the student’s thesis and to carry it out an operating installation was used in the laboratory of “Heating engineering” at the Faculty of “Technics and Technology” – Yambol. The realized connection schemes of the radiators in the experiments are “up-down” and “down-up”. The methology includes monitoring the ambient temperature, regulating the power of the electric heaters of the heating source, taking into account the inlet and outlet temperatures and the temperature profile of the radiators. Based on the obtained results and done analysis, conclusions for increasing the energy efficiency of a specific radiator by changing the scheme of its connection to the heating network have been formulated.
1 February 2021 in Journal of Physics: Conference Series
The stability of operation, vibration-free processing of products various types at high-speed machining centers suggests the improvement of research in the field of the dynamics of machine tools and their main forming units. The three-dimensional models of the forming spindle node and the corner table of the machining center for the drilling-milling-boring type in the CAD environment KOMPAS-3D have been developed. An algorithm for analyzing the dynamic quality of the machine elastic parts based on the constructed static and frequency formular in the mathematical environment MAPLE is proposed. Programs have been developed and graphs of the main frequency characteristics and the hodograph of the transfer function for the spindle node in the specialized Signal Processing module have been obtained. The method of D-partitions using to estimate the vibration stability of the forming units on an example of 4 coordinate milling machining centers is introduced. Experiments on two variants of technological adjustments with different dimensions of the tool block (the cantilever part of the spindle assembly) were carried out. The analysis of stability in the plane of the cutting process optimized parameter (specific cutting force) was carried out. The region and the boundary of the stable functioning of the machine and, on this basis, the optimum modes of machining by the criterion of vibration stability are revealed.