The paper presents a Switched-Capacitor Boost DC-DC Converter (SC-BC) which can be used in energy harvesting applications using thermoelectric generators (TEGs) with low output voltage, low power and a significant internal resistance. It consists of a switching capacitor circuit, where MOSFETs are used as switches, and a boost stage. The converter is a modification of a previously presented scheme in which diodes are used in the switched capacitor stage. A higher voltage gain and an increased efficiency can thus be achieved. The model of the converter was developed considering the internal resistance of the TEG and boost stage inductor. A comparison with the diode based converter is shown, with consideration of the TEG internal resistance. Calculation is presented of the main passive components. A control algorithm is also proposed and evaluated. It is based on a linearization approach, and designed for output voltage and inductor current control. The operation of both converter and control are verified with the simulation and experimental results.
Switched-capacitor converters and their alternatives have been shown to provide high efficiency with high power densities on smaller volumes, and can thereby be a suitable choice for energy harvesting. This paper proposes a hybrid power architecture based on a switched-capacitor topology and a boost converter that can be used for such purposes. A switching capacitor circuit can achieve any voltage ratio, allowing a boost converter to increase the input voltage to higher voltage levels. The first stage is unregulated with high-efficiency voltage conversion. The boost stage provides a regulated voltage output on such a converter. Rather than cascading two converters, their operation is integrated for the output voltage regulation. One major problem of switched-capacitor converters is output voltage regulation, which is solved by the interconnection of the power stages. The simplicity and robustness of the solution provide the possibility to achieve higher voltage ratios than cascading boost converters and provide higher efficiency. The converter’s size and cost can be improved with the integration of switching capacitors in DC-DC converter structures. A converter prototype has been designed, modelled, and built for the input voltage level of 2 V and power level of 5 W.