Magnetic field control of light is among the most intriguing methods for modulation of light intensity and polarization on sub-nanosecond timescales. The implementation in nanostructured hybrid materials provides a remarkable increase of magneto-optical effects. However, so far only the enhancement of already known effects has been demonstrated in such materials. Here we postulate a novel magneto-optical phenomenon that originates solely from suitably designed nanostructured metal-dielectric material, the so-called magneto-plasmonic crystal. In this material, an incident light excites coupled plasmonic oscillations and a waveguide mode. An in-plane magnetic field allows excitation of an orthogonally polarized waveguide mode that modifies optical spectrum of the magneto-plasmonic crystal and increases its transparency. The experimentally achieved light intensity modulation reaches 24%. As the effect can potentially exceed 100%, it may have great importance for applied nanophotonics. Further, the effect allows manipulating and exciting waveguide modes by a magnetic field and light of proper polarization.
Research on magneto-optical photonic crystals has so far been focused on theoretical investigations, because suitable multilayers of iron garnet, the most promising material, have not been readily available. We report the preparation and characterization of a one-dimensional magneto-optical photonic crystal composed of 17 heteroepitaxial layers of bismuth iron garnet and yttrium iron garnet. The magneto-optical Faraday rotation was increased by 140% while transmission decreased by just 16% at the design wavelength of 750 nm as compared with a single-layer bismuth iron garnet film of equivalent thickness. The sample is free of cracks, and good agreement of simulated and experimental spectra of optical transmission and Faraday rotation indicate high quality of the sample and robustness of the preparation technique.
Heteroepitaxial film structures have been pulsed laser deposited on single crystals to fabricate two terminal resistance switching devices. junctions exhibit reproducible switching between a high resistance state (HRS) with insulating properties and a semiconducting or metallic low resistance state (LRS) with resistance ratios up to . Reversible electrical switching is a polar effect achievable both in continuous sweeping mode and in the pulse regime. Successive temperature crossover of electronic transport from the thermal activation of the deep levels at high temperatures to thermal activation of the shallow levels and finally at low temperatures to the regime of temperature independent resistance, usually associated with quantum tunneling, has been found for the insulating HRS. The temperature dependence of the LRS reveals a para-to-ferromagnetic phase transition in the (LCMO) electrode at and an anomaly at lower temperatures corresponding to the Curie temperature of the depleted part of the LCMO film. Current-voltage characteristics in the LRS are highly nonlinear, and show negative differential conductivity (NDC). We suggest that the reversible resistance switching ocurrs due to the electric field induced nucleation of filament-type conducting valence-shifted domains inside the insulating matrix. The abrupt insulator-to-metal transition is the result of localization of electronic states in ions and the subsequent appearance of hole conductivity in the oxygen -bands. NDC at low temperatures is relied upon the interband scattering of carriers from a low energy, high mobility valley into a high energy valley with low mobility.
Recently we sintered by pulsed laser deposition (PLD) technique the epitaxial Fe-deficient yttrium iron garnet (YIG) films with ferromagnetic resonance (FMR) linewidth as narrow as 0.9 Oe, the uniaxial anisotropy as high as , and demonstrated them feasible for magnetostatic waves band pass filter application [Manuilov et al., J. Appl. Phys. 105, 033917 (2009)]. Here we explore the origin of unusually high noncubic magnetic anisotropy. Using the angular resolved FMR spectroscopy we found that in addition to strong uniaxial anisotropy, cubic magnetic anisotropy experienced almost fivefold reduction compared to standard YIG grown by liquid phase epitaxy. Molecular field theory was employed to calculate saturation magnetization , cubic magnetocrystalline , and uniaxial anisotropy in garnets with Fe vacancies. The modeling utilizes crystal field parameters that we revealed from earlier published experimental data on diamagnetic ion substituted and Fe-substituted isomorphous diamagnetic garnets. Consistent single ion anisotropy crystal field theory perfectly fits experimentally observed high saturation magnetization, reduction in cubic, and appearance of strong uniaxial anisotropy in PLD-grown Fe-deficient YIG films. The redistribution of Fe vacancies between different magnetic sublattices was quantified and confirmed that in YIG(111) films ferric ions preferentially leave vacant octahedrally coordinated sites. Simulation of growth induced anisotropy proves the ordering of vacancies within octahedral sites. At equal number of available ferric ions and vacancies, the latter populate the octahedrons with distortion axis perpendicular to the film surface with the probability equal to 0.67. Deformation blockage of octahedral complexes with distortion axes directed along the film surface reduces this probability down to 0.14.
Thin (YIG) films were pulsed laser deposited onto (111) and (001) substrates. Processing conditions were optimized to obtain compressively strained films with a ferromagnetic resonance linewidth at 9 GHz as narrow as 0.9 Oe and high uniaxial magnetic anisotropy . Several designs of magnetostatic surface wave (MSSW) bandpass filters were fabricated and tested: 0.45 and thick YIG films lain on transducers alumina board and with microstripe transducers defined directly onto YIG film, with effective antenna areal sizes of 2 and . The MSSW filter with antenna shows, at 7.5 GHz, insertion loss −9 dB and a resonant −3 dB bandwidth as narrow as 12.5 MHz.
(LSCMO) films have been grown by a pulsed-laser deposition technique on Si(001) substrates buffered with /yttrium-stabilized zirconia (YSZ) heteroepitaxial layers. X-ray diffraction has revealed cube-on-cube growth of an epitaxial heterostructure whereas the LSCMO layer grows in the “diagonal-on-side” manner on top of the (BTO) template. The maximum temperature coefficient of resistivity (TCR)=4.4% and colossal magnetoresistance (CMR) Δρ/ρ∼2.9% have been reached at 294 K. This was achieved due to the successive improvement of -axis orientation of the layers: Full widths at half-maximum 0.65°, 0.58°, 0.65°, 1.13°, and 0.18° in stack, respectively. As a prototype of an uncooled bolometer, heteroepitaxial CMR structure on Si demonstrates, at 294 K, the noise equivalent temperature difference of 1.2 μK/√[email protected] Hz.