10 July 2013 in Nature Communications
Magnetic field control of light is among the most intriguing methods for modulation of light intensity and polarization on sub-nanosecond timescales. The implementation in nanostructured hybrid materials provides a remarkable increase of magneto-optical effects. However, so far only the enhancement of already known effects has been demonstrated in such materials. Here we postulate a novel magneto-optical phenomenon that originates solely from suitably designed nanostructured metal-dielectric material, the so-called magneto-plasmonic crystal. In this material, an incident light excites coupled plasmonic oscillations and a waveguide mode. An in-plane magnetic field allows excitation of an orthogonally polarized waveguide mode that modifies optical spectrum of the magneto-plasmonic crystal and increases its transparency. The experimentally achieved light intensity modulation reaches 24%. As the effect can potentially exceed 100%, it may have great importance for applied nanophotonics. Further, the effect allows manipulating and exciting waveguide modes by a magnetic field and light of proper polarization.
1 September 2000 in Journal of Applied Physics
We report on processing and comparative characterization of epitaxial Bi3Fe5O12 (BIG) films grown onto Gd3(ScGa)5O12[GSGG,(001)] single crystal using pulsed laser deposition (PLD) and reactive ion beam sputtering (RIBS) techniques. A very high deposition rate of about 0.8 μm/h has been achieved in the PLD process. Comprehensive x-ray diffraction analyses reveal epitaxial quality both of the films: they are single phase, exclusively (001) oriented, the full width at half maximum of the rocking curve of (004) Bragg reflection is 0.06 deg for PLD and 0.05 deg for RIBS film, strongly in-plane textured with cube-on-cube film-to-substrate epitaxial relationship. Saturation magnetization 4πMs and Faraday rotation at 635 nm were found to be 1400 Gs and −7.8 deg/μm in PLD-BIG, and 1200 Gs and −6.9 deg/μm in RIBS-BIG. Ferromagnetic resonance (FMR) measurements performed at 9.25 GHz yielded the gyromagnetic ratio γ=1.797×107 l/s Oe, 1.826×107 l/s Oe; the constants of uniaxial magnetic anisotropy were Ku*=−8.66×104 erg/cm3, −8.60×104 erg/cm3; the cubic magnetic anisotropy K1=−2.7×103 erg/cm3,−3.8×103 erg/cm3; and the FMR linewidth ΔH=25 and 34 Oe for PLD and RIBS films correspondingly. High Faraday rotation, low microwave loss, and low coercive field ⩽40 Oe of BIG/GSGG(001) films promise their use in integrated magneto-optic applications.
1 February 2009 in Journal of Applied Physics
Thin (YIG) films were pulsed laser deposited onto (111) and (001) substrates. Processing conditions were optimized to obtain compressively strained films with a ferromagnetic resonance linewidth at 9 GHz as narrow as 0.9 Oe and high uniaxial magnetic anisotropy . Several designs of magnetostatic surface wave (MSSW) bandpass filters were fabricated and tested: 0.45 and thick YIG films lain on transducers alumina board and with microstripe transducers defined directly onto YIG film, with effective antenna areal sizes of 2 and . The MSSW filter with antenna shows, at 7.5 GHz, insertion loss −9 dB and a resonant −3 dB bandwidth as narrow as 12.5 MHz.
10 March 2015 in Journal of Applied Physics
The magnetodynamical properties of nanometer-thick yttrium iron garnet films are studied using ferromagnetic resonance as a function of temperature. The films were grown on gadolinium gallium garnet substrates by pulsed laser deposition. First, we found that the damping coefficient increases as the temperature increases for different film thicknesses. Second, we found two different dependencies of the damping on film thickness: at room temperature, the damping coefficient increases as the film thickness decreases, while at T = 8 K, we find the damping to depend only weakly on the thickness. We attribute this behavior to an enhancement of the relaxation of the magnetization by impurities or defects at the surfaces.
16 June 2003 in Applied Physics Letters
(LSCMO) films have been grown by a pulsed-laser deposition technique on Si(001) substrates buffered with /yttrium-stabilized zirconia (YSZ) heteroepitaxial layers. X-ray diffraction has revealed cube-on-cube growth of an epitaxial heterostructure whereas the LSCMO layer grows in the “diagonal-on-side” manner on top of the (BTO) template. The maximum temperature coefficient of resistivity (TCR)=4.4% and colossal magnetoresistance (CMR) Δρ/ρ∼2.9% have been reached at 294 K. This was achieved due to the successive improvement of -axis orientation of the layers: Full widths at half-maximum 0.65°, 0.58°, 0.65°, 1.13°, and 0.18° in stack, respectively. As a prototype of an uncooled bolometer, heteroepitaxial CMR structure on Si demonstrates, at 294 K, the noise equivalent temperature difference of 1.2 μK/√[email protected] Hz.
1 March 2007 in Journal of Applied Physics
We report the properties of one-dimensional heteroepitaxial all-garnet magneto-optical (MO) photonic crystals (MOPCs) composed of alternating MO-active Bi3Fe5O12 (BIG) and transparent Sm3Ga5O12 (SGG) quarter-wavelength layers grown by rf-magnetron sputtering on Ca,Mg,Zr:Gd3Ga5O12(111) and Gd3Sc2Ga3O12(001) crystals. MOPCs’ spectra, as designed, exhibit a stop band structure and a band gap with the transmittance central peak at 750nm caused by light localization in the half-wavelength BIG cavity. A series of MOPCs with different numbers of [BIG∕SSG]m reflectors (m=4, 5, and 6) has been fabricated to optimize the specific Faraday rotation θF (deg∕μm) and MO-quality factor Q(deg)=2∣θF∣/absorption coefficient. A close BIG-to-SGG lattice match enabled significant improvement of [Bi3Fe5O12∕Sm3Ga5O12]m properties compared to previously reported [Bi3Fe5O12∕Y3Fe5O12]m [S. Kahl and A. M. Grishin, Appl. Phys. Lett. 84, 1438 (2004)] and [Bi3Fe5O12∕Gd3Ga5O12]m [S. I. Khartsev and A. M. Grishin, Appl. Phys. Lett. 87, 122504 (2005)] pulsed laser deposited photonic crystals. At the resonance wavelength λ=750nm, θF=−20.5deg∕μm and Q=66deg represent the highest MOPC performance achieved so far. Respectively, these are 470% and 31% enhancements compared to a single layer Bi3Fe5O12 film Faraday rotator with equivalent thickness.