Black phosphorus prepared via the mineralization concept displays promising characteristics with respect to Li-ion battery applications. Although the theoretical specific capacity of black phosphorus as a negative electrode material is 2596 mA h g−1, a good cycling stability at high capacities, however, is still missing. Even worse, a large capacity drop after the first cycle is present and, depending on the electrode preparation, a poor first cycle coulombic efficiency (only 8%) represents a huge challenge to overcome. Herein we report on the performances of black phosphorus as a negative electrode material and display the roles of Cu3P and the copper current collector in this context. Furthermore, a composite material prepared by reacting pristine black phosphorus particles with a copper solution under solvothermal conditions shows a first cycle coulombic efficiency of 43%. We show that the presence of copper is crucial for the electrochemical performance of black phosphorus and that also the particle size and the electrode preparation procedure play a crucial role.
Lithium metal is considered to be the most promising anode for the next generation of batteries if the issues related to safety and low coulombic efficiency can be overcome. It is known that the initial morphology of the lithium metal anode has a great influence on the cycling characteristics of a lithium metal battery (LMB). Lithium‐powder‐based electrodes (Lip‐electrodes) are reported to diminish the occurrence of high surface area lithium deposits. Usually, ultra‐thin lithium foils (<50 µm) and Lip‐electrodes are prepared on a copper substrate, thus a metal–metal contact area is generated. The combination of these two metals in the presence of an electrolyte, however, can lead to galvanic corrosion. Herein, the corrosion behavior of Lip‐electrodes is studied. The porosity of such electrodes leads to a high amount of accessible Cu surface in contact with electrolyte. As a consequence, Lip‐electrodes aged for 1 week in the electrolyte show spontaneous lithium dissolution near the junction to copper and void formation on the lithium‐powder particles. This corrosion process affects the delivered capacity of Lip‐electrodes and increases the overvoltage of the lithium electrodissolution process. The occurrence of corrosion at the Cu|Lip interface raises concerns about the practicality of multi‐metallic component systems for LMBs.
Continuous lithium (Li) depletion shadows the increase in energy density and safety properties promised by zero‐excess lithium metal batteries (ZELMBs). Guiding the Li deposits toward more homogeneous and denser lithium morphology results in improved electrochemical performance. Herein, a lithium nitrate (LiNO3) enriched separator that improves the morphology of the Li deposits and facilitates the formation of an inorganic‐rich solid–electrolyte interphase (SEI) resulting in an extended cycle life in Li||Li‐cells as well as an increase of the Coulombic efficiency in Cu||Li‐cells is reported. Using a LiNi0.6Co0.2Mn0.2O2 positive electrode in NCM622||Cu‐cells, a carbonate‐based electrolyte, and a LiNO3 enriched separator, an extension of the cycle life by more than 50 cycles with a moderate capacity fading compared to the unmodified separator is obtained. The relative constant level of LiNO3 in the electrolyte, maintained by the LiNO3 enriched separator throughout the cycling process stems at the origin of the improved performance. Ion chromatography measurements carried out at different cycles support the proposed mechanism of a slow and constant release of LiNO3 from the separator. The results indicate that the strategy of using a LiNO3 enriched separator instead of LiNO3 as a sacrificial electrolyte additive can improve the performance of ZELMBs further by maintaining a compact and thus stable SEI layer on Li deposits.
Lithium ion batteries (LIBs) using silicon as anode material are endowed with much higher energy density than state‐of‐the‐art graphite‐based LIBs. However, challenges of volume expansion and related dynamic surfaces lead to continuous (re‐)formation of the solid electrolyte interphase, active lithium losses, and rapid capacity fading. Cell failure can be further accelerated when Si is paired with high‐capacity, but also rather reactive Ni‐rich cathodes, such as LiNi0.8Co0.1Mn0.1O2 (NCM‐811). Here, the practical applicability of thermal evaporation of Li metal is evaluated as a prelithiation technique on micrometer‐sized Si (µ‐Si) electrodes in addressing such challenges. NCM‐811 || “prelithiated µ‐Si” full‐cells (25% degree of prelithiation) can attain a higher initial discharge capacity of ≈192 mAh gNCM‐811−1 than the cells without prelithiation with only ≈160 mAh gNCM‐811−1. This study deeply discusses significant consequences of electrode capacity balancing (N:P ratio) with regard to prelithiation on the performance of full‐cells. The trade‐off between cell lifetime and energy density is also highlighted. It is essential to point out that the phenomena discussed here can further guide the direction of research in using the thermal evaporation of Li metal as a prelithiation technique toward its practical application on Si‐based LIBs.