Marlena Maria Bela

Marlena Maria Bela

Auto-generated profile, based on publicly available information

Marlena Maria Bela

MEET Battery Research Center University of Münster Corrensstraße 46 48149 Münster Germany

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 October 2023 in Small
Verified
Journal Article
Open access
SSSilvan Stuckenberg
Silvan Stuckenberg
MBMarlena Maria Bela
Marlena Maria Bela
CLChristian‐Timo Lechtenfeld
Christian‐Timo Lechtenfeld
MMMaximilian Mense
Maximilian Mense
VKVerena Küpers
Verena Küpers
MSMarian Cristian Stan
Marian Cristian Stan
Continuous lithium (Li) depletion shadows the increase in energy density and safety properties promised by zero‐excess lithium metal batteries (ZELMBs). Guiding the Li deposits toward more homogeneous and denser lithium morphology results in improved electrochemical performance. Herein, a lithium nitrate (LiNO3) enriched separator that improves the morphology of the Li deposits and facilitates the formation of an inorganic‐rich solid–electrolyte interphase (SEI) resulting in an extended cycle life in Li||Li‐cells as well as an increase of the Coulombic efficiency in Cu||Li‐cells is reported. Using a LiNi0.6Co0.2Mn0.2O2 positive electrode in NCM622||Cu‐cells, a carbonate‐based electrolyte, and a LiNO3 enriched separator, an extension of the cycle life by more than 50 cycles with a moderate capacity fading compared to the unmodified separator is obtained. The relative constant level of LiNO3 in the electrolyte, maintained by the LiNO3 enriched separator throughout the cycling process stems at the origin of the improved performance. Ion chromatography measurements carried out at different cycles support the proposed mechanism of a slow and constant release of LiNO3 from the separator. The results indicate that the strategy of using a LiNO3 enriched separator instead of LiNO3 as a sacrificial electrolyte additive can improve the performance of ZELMBs further by maintaining a compact and thus stable SEI layer on Li deposits.

27 November 2022 in Advanced Energy Materials
Verified
Journal Article
Open access
EAEgy Adhitama
Egy Adhitama
MBMarlena M. Bela
Marlena M. Bela
FDFeleke Demelash
Feleke Demelash
MSMarian Cristian Stan
Marian Cristian Stan
MWMartin Winter
Martin Winter
Tobias PlackeTobias Placke
Tobias Placke
Lithium ion batteries (LIBs) using silicon as anode material are endowed with much higher energy density than state‐of‐the‐art graphite‐based LIBs. However, challenges of volume expansion and related dynamic surfaces lead to continuous (re‐)formation of the solid electrolyte interphase, active lithium losses, and rapid capacity fading. Cell failure can be further accelerated when Si is paired with high‐capacity, but also rather reactive Ni‐rich cathodes, such as LiNi0.8Co0.1Mn0.1O2 (NCM‐811). Here, the practical applicability of thermal evaporation of Li metal is evaluated as a prelithiation technique on micrometer‐sized Si (µ‐Si) electrodes in addressing such challenges. NCM‐811 || “prelithiated µ‐Si” full‐cells (25% degree of prelithiation) can attain a higher initial discharge capacity of ≈192 mAh gNCM‐811−1 than the cells without prelithiation with only ≈160 mAh gNCM‐811−1. This study deeply discusses significant consequences of electrode capacity balancing (N:P ratio) with regard to prelithiation on the performance of full‐cells. The trade‐off between cell lifetime and energy density is also highlighted. It is essential to point out that the phenomena discussed here can further guide the direction of research in using the thermal evaporation of Li metal as a prelithiation technique toward its practical application on Si‐based LIBs.

14 August 2023 in Journal of Materials Chemistry A
Verified
Journal Article
Open access
PDF file
TITjark T. K. Ingber
Tjark T. K. Ingber
MBMarlena M. Bela
Marlena M. Bela
FPFrederik Püttmann
Frederik Püttmann
JDJan F. Dohmann
Jan F. Dohmann
PBPeter Bieker
Peter Bieker
MSMarian Cristian Stan
Marian Cristian Stan
In zero-excess lithium metal batteries (ZELMBs), also termed “anode-free” LMBs, Li from the positive electrode is electrodeposited onto a bare current collector instead of the Li metal negative electrode commonly used in LMBs. This enables high theoretical energy density and facile, safe, and low-cost assembly. To tackle coulombic inefficiencies during Li deposition/dissolution, 3D structured current collectors can be used instead of 2D foil materials. This study elucidates the Li deposition behavior in custom-made open-porous Cu micro-foams from nucleation to large scale deposition. For the first time in ZELMBs, surface and sub-surface Li deposits in open-porous 3D materials are compared to deposits on 2D foils using cryogenic focused ion beam scanning electron microscopy (cryo-FIB-SEM). The results highlight that Cu micro-foams can store substantial amounts of dendrite-free Li in their open-porous 3D structure, minimizing detrimental volume changes during Li deposition/dissolution. Electrochemical analyses and simulations reveal that current density distribution over the large surface area of the Cu micro-foams reduces the Li nucleation overvoltage by ≈40%. Also, charge/discharge cycling in ZELMBs shows increases in coulombic efficiency, capacity retention, and cycle life. Overall, this work explains how open-porous Cu micro-foam current collectors improve the Li deposition behavior to boost the cycling characteristics of ZELMBs.

26 September 2022 in Journal of Power Sources
Verified
Journal Article
Closed access
SKSebastian P. Kühn
Sebastian P. Kühn
FPFelix Pfeiffer
Felix Pfeiffer
MBMarlena Bela
Marlena Bela
URUta Rodehorst
Uta Rodehorst
DWDominik Weintz
Dominik Weintz
Isidora Cekic-LaskovicIsidora Cekic-Laskovic
Isidora Cekic-Laskovic

14 March 2024 in Advanced Materials Interfaces
Verified
Journal Article
Open access
MBMarlena M. Bela
Marlena M. Bela
CSChristina Schmidt
Christina Schmidt
KNKerstin Neuhaus
Kerstin Neuhaus
THTobias Hering
Tobias Hering
MSMarian Cristian Stan
Marian Cristian Stan
MBMarkus Börner
Markus Börner
Lithium metal batteries are promising next‐generation rechargeable batteries with high energy density. However, the high reactivity of lithium metal leads to an undesirable growth of high surface area lithium during electrodeposition and ‐dissolution and remains a key challenge that must be addressed to enable commercialization. Modification of the Li metal surface to obtain protective coatings is a common method to overcome these challenges. In this study, the influence of the thickness of an intermetallic coating on Li metal is investigated after application by means of thermal evaporation. In addition, the relevance of pre‐treatments in reducing the native layer thickness and surface roughness by roll‐pressing Li metal prior to coating is demonstrated. Morphological analyses are performed on cross‐sections prepared under cryogenic conditions to investigate the origin of high surface area lithium growth and coating cracks after electrodeposition and ‐dissolution processes. The results obtained support the conclusion that the exclusive combination of roll‐pressed Li metal foil followed by coating reduces overvoltage and improves cycle life at elevated current densities.

23 September 2025 in Advanced Energy and Sustainability Research
Verified
Journal Article
Open access
DWDominik Weintz
Dominik Weintz
LSLukas Stolz
Lukas Stolz
MBMarlena M. Bela
Marlena M. Bela
RHRobert T. Hinz
Robert T. Hinz
MWMartin Winter
Martin Winter
JKJohannes Kasnatscheew
Johannes Kasnatscheew
In lithium metal batteries, the cycle life relevantly declines with decreasing electrolyte amount. The capacity decay is kinetically reasoned as shown by rises in cell resistances, in particular for the discharge processes, as indicated by the full capacity recovery during a constant voltage step after discharge at the end of life (EOL). Interestingly, adding fresh electrolyte after EOL only partially recovers the capacity, suggesting a different and more crucial failure origin than the assumed loss of charge carriers due to the electrolyte “dry‐out”. Contrary to the cathode, the anode has higher resistances and a thicker surface layer post mortem, which is also observed in Li‖Li cells. In addition, the resistance portion of the electrolyte itself remains comparatively low during cycling, suggesting that resistance rise is dominated by the Li anode and is confirmed by exchange with fresh Li, where the capacities are recovered toward initial values, again. Based on the observations, a mechanism with a faster dry‐out of Li metal pores is proposed, which decreases the electrolyte‐accessible Li metal surface area, enhances local current densities, and facilitates high surface area and dead lithium. This continuously clogs and blocks the surface, reducing the practical accessible Li and eventually causing the rollover fade.