Pilot-scale experiments were conducted using three integrated vertical-flow constructed wetlands treating synthetic low-C/N wastewater prepared to simulate rural domestic wastewater. Three filter-media configurations were compared: C1, quartz sand plus bio-ceramsite; C2, bio-ceramsite alone; and C3, bio-ceramsite plus volcanic rock. C2 and C3 achieved closely comparable removal performance. Given that only one pilot-scale unit was established for each configuration, this study should be regarded as an exploratory pilot-scale study. Their mean removal efficiencies were 83.48% and 82.17% for chemical oxygen demand (COD), 94.59% and 92.49% for total phosphorus (TP), 61.23% and 61.17% for ammonium nitrogen (NH4+-N), and 53.21% and 53.17% for total nitrogen (TN), respectively; none of the differences were statistically significant (p > 0.05). These pilot-scale findings corroborate the laboratory-scale observation that volcanic rock plus bio-ceramsite performs as effectively as bio-ceramsite alone. Microbial community analysis further showed that substrate type largely determined the core community framework, with C2 and C3 clustering within the same major group. Overall, the volcanic rock–bio-ceramsite mixture exhibited robust pollutant removal and ecological adaptability at pilot scale comparable to those of the single bio-ceramsite substrate; however, further economic and long-term engineering assessments are needed before its cost-effectiveness can be fully established.
During rapid social and economic growth, large amounts of organic matter, nitrogen, and phosphorus are released into the environment with wastewater, and constructed wetlands (CWs) play a key role in water pollution prevention and control. This study employed six test columns to evaluate the pollutant removal performance of various filter media combinations in CWs when treating synthetic sewage under different pollution and hydraulic loads. The results showed that all columns containing bio-ceramsite exhibited superior pollutant removal performance, especially for organics and phosphorus. A synergistic effect was observed between bio-ceramsite and volcanic rock in enhancing pollutant removal, with average removal rates of 88.02%, 69.69%, 62.96%, and 88.22% for COD, NH4+, TN, and TP, respectively, under the nine experimental conditions. Scanning Electron Microscopy (SEM), BET surface area testing, and microbial community structure analysis were conducted to investigate the reasons for the differences in pollutant removal efficiency among the columns. The results showed that bio-ceramsite exhibits a highly microporous structure and a large surface area of 1.3816 m2/g, which provides abundant adsorption sites for microorganisms and pollutant molecules. The microbial community structure on bio-ceramsite remained highly consistent across all column tests, with dominant microbial species playing a key role in enhancing pollutant removal efficiency. The conclusions of this study indicate the potential application of some filter media combinations in CW design for environmental conservation.