Dysprosium doped yttria stabilized zirconia single crystals grown by the laser floating zone method crystallize in the tetragonal form as confirmed by Raman spectroscopy. In addition to the role of the dysprosium ion as stabilizer, the ion optical activation constitutes an opportunity to explore the zirconia-based material in the photonics area. The spectroscopic characteristics of the doped fibers were analyzed as a function of the amount of the Dy3+ concentration. The ratio of blue and yellow transition of the Dy3+ ions indicates that lightly doped samples should be considered for the production of the white emission. The analysis of the excitation population mechanisms provides information on the ions preferential excitation paths for the desired optical applications. It was found that under ultraviolet excitation the lightly doped fibers exhibit an intense and bright white luminescence which can be observed by naked eye at room temperature.
1 June 2012 in Materials Science and Engineering: B
In this work we demonstrate by photoluminescence studies white light emission from a monolithic InGaN/GaN single quantum well structure grown by metal organic chemical vapour deposition. As-grown and thermally annealed samples at high temperature (1000 °C, 1100 °C and 1200 °C) and high pressure (1.1 GPa) were analysed by spectroscopic techniques and the annealing effect on the photoluminescence is deeply explored. Under laser excitation of 3.8 eV at room temperature, the as-grown structure exhibits two main emission bands: a yellow band peaked at 2.14 eV and a blue band peaked at 2.8 eV resulting in white light perception. Interestingly, the stability of the white light is preserved after annealing at the lowest temperature (1000 °C), but suppressed for higher temperatures due to a deterioration of the blue quantum well emission. Moreover, the control of the yellow/blue bands intensity ratio, responsible for the white colour coordinate temperatures, could be achieved after annealing at 1000 °C. The room temperature white emission is studied as a function of incident power density and the correlated colour temperature values are found to be in the warm white range: 3260–4000 K.
1 December 2019 in Journal of Non-Crystalline Solids