Strain and composition distributions within wurtzite InGaN/GaN layers are investigated by high-resolution reciprocal space mapping (RSM). We illustrate the potential of RSM to detect composition and strain gradients independently. This information is extracted from the elongation of broadened reciprocal lattice points (RLP) in asymmetric x-ray reflections. Three InxGa1−xN/GaN (nominal x=0.25) samples with layer thickness of 60, 120, and 240 nm, were grown in a commercial metal-organic chemical vapor deposition reactor. The RSMs around the (105) reflection show that the strain profile is nonuniform over depth in InGaN. The directions of “pure” strain relaxation in the reciprocal space, for a given In content (isocomposition lines), are calculated based on elastic theory. Comparison between these directions and measured distributions of the RLP shows that the relaxation process does not follow a specific isocomposition line. The In mole fraction (x) increases as the films relax. At the start of growth all the films have x∼0.2 and are coherent to GaN. As they relax, x progressively increases towards the nominal value (0.25). Compositional gradients along the growth direction extracted from the RSM analysis are confirmed by complementary Rutherford backscattering measurements.
A depth-resolved study of the optical and structural properties of wurtzite InGaN/GaN bilayers grown by metallorganic chemical vapor deposition on sapphire substrates is reported. Depth-resolved cathodoluminescence (CL) and Rutherford backscattering spectrometry (RBS) were used to gain an insight into the compositional profile of a 75-nm thick InGaN epilayer in the direction of growth. CL acquired at increasing electron energies reveals a peak shift of about 25 meV to the blue when the electron beam energy is increased from 0.5 to ∼7 keV, and shows a small shift to lower energies between ∼7 and 9 keV. For higher accelerating voltages the emission energy peak remains constant. This behavior can be well accounted for by a linear variation of In content over depth. Such an interpretation conforms to the In/Ga profile derived from RBS, where a linear decrease of the In mole fraction from the near surface (∼0.20) down to the near GaN/InGaN interface (∼0.14) region fits the random spectra very well. Furthermore, by measuring the tetragonal distortion at different depths, using RBS/channeling, it is shown that regions of higher In content also appear to be more relaxed. This result suggests that strain hinders the incorporation of In atoms in the InGaN lattice, and is the driving force for the compositional pulling effect in InGaN films.
Hybrid metal oxide nano‐ and microstructures exhibit novel properties, which make them promising candidates for a wide range of applications, including gas sensing. In this work, the characteristics of the hybrid ZnO‐Bi2O3 and ZnO‐Zn2SnO4 tetrapod (T) networks are investigated in detail. The gas sensing studies reveal improved performance of the hybrid networks compared to pure ZnO‐T networks. For the ZnO‐T‐Bi2O3 networks, an enhancement in H2 gas response is obtained, although the observed p‐type sensing behavior is attributed to the formed junctions between the arms of ZnO‐T covered with Bi2O3 and the modulation of the regions where holes accumulate under exposure to H2 gas. In ZnO‐T‐Zn2SnO4 networks, a change in selectivity to CO gas with high response is noted. The devices based on individual ZnO‐T‐Bi2O3 and ZnO‐T‐Zn2SnO4 structures showed an enhanced H2 gas response, which is explained on the basis of interactions (electronic sensitization) between the ZnO‐T arm and Bi2O3 shell layer and single Schottky contact structure, respectively. Density functional theory‐based calculations provide mechanistic insights into the interaction of H2 and CO gas molecules with Bi‐ and Sn‐doped ZnO(0001) surfaces, revealing changes in the Fermi energies, as well as charge transfer between the molecules and surface species, which facilitate gas sensing.
We report hot filament thermal CVD (HFTCVD) as a new hybrid of hot filament and thermal CVD and demonstrate its feasibility by producing high quality large area strictly monolayer graphene films on Cu substrates. Gradient in gas composition and flow rate that arises due to smart placement of the substrate inside the Ta filament wound alumina tube accompanied by radical formation on Ta due to precracking coupled with substrate mediated physicochemical processes like diffusion, polymerization etc., led to graphene growth. We further confirmed our mechanistic hypothesis by depositing graphene on Ni and SiO2/Si substrates. HFTCVD can be further extended to dope graphene with various heteroatoms (H, N, and B, etc.,), combine with functional materials (diamond, carbon nanotubes etc.,) and can be extended to all other materials (Si, SiO2, SiC etc.,) and processes (initiator polymerization, TFT processing) possible by HFCVD and thermal CVD.
23 January 2017 in ACS Applied Materials & Interfaces
Robust evidences are presented showing that the Raman mode around 250 cm−1 in the Sb2Se3 thin films does not belong to this binary compound. The laser power density dependence of the Raman spectrum revealed the formation of Sb2O3 for high values of laser intensity power density excitation under normal atmospheric conditions. To complement this study, the Sb2Se3 films were characterized by x-ray diffraction during in situ annealing. Both these measurements showed that the Sb2Se3 compound can be replaced by Sb2O3. A heat-assisted chemical process explains these findings. Furthermore, Raman conditions required to perform precise measurements are described.