Nowadays, Energy consumption in the field of transportation comes next to industrial consumption worldwide. If transportation is completely powered by renewable energy, the utilization of fossil fuels can be drastically reduced, which will result in a lesser amount of greenhouse gas emissions. Electric vehicles (EVs) can act as an alternative to make transportation pollution-free. Large-scale usage of EVs causes high electricity demand on the supply system. This problem can be overcome by utilizing renewable energy sources (RESs) for Electric Vehicle charging. Due to the unpredictability of RESs, coordinating EV charging with other loads and renewable generation is problematic. By using EVs as energy units, power fluctuations in the electric grid can be compensated. This paper presents a summary of recent research in the domain of integration of renewable energy sources with electric vehicles (EVs) under the smart grid environment. Electric vehicles-smart grid integrated systems face several issues related to communication, grid infrastructure and control in the future power system. Feasibility of integration of solar and wind energy systems with electric vehicles is discussed in section 2. The existing research articles in this area are classified into two based on the purpose: EVs integration into the electric grid and Vehicle to grid services. The function of V2G in the electricity market, as well as its management concerns, are investigated in section 3. Finally, the research gaps and future scope of incorporating electric vehicles with renewable energy sources and the Smart grid are highlighted.
30 March 2022 in International Journal of Electrical and Electronics Research
In many residential buildings the electrical wires of individual houses are laid in the same conduit pipe and some mistakes could be made in identifying similar coloured wires when they are laid in same conduit pipe. Most of the faults are caused by the neutral interconnection in the wiring system. Usually neutral wires are connected to neutral bus within the panel board or switchboard, and are "bonded" to earth ground. In our secondary distribution, tree system of supply is mostly utilized. The voltage of each phase to neutral will be maintained at rated value even during the unbalanced load conditions. If neutral wire connection is poor the voltage at each phase will be different from one another, such an isolated neutral point is called floating neutral and the voltage of the point is always changing. This is the reason for over voltage causing damage to appliance’s which should be protected. In this paper, a smart system that identifies power leakage and provides over voltage protection to the residential building is proposed.
The main aim of this paper is to highlight the benefits of Machine Learning in the power system applications. The regression-based machine learning model is used in this paper for predicting the power system analysis and Economic analysis results. In this paper, Predictive ML models for two modified IEEE 14-bus and IEEE-30 bus systems, integrated with renewable energy sources and reactive power compensative devices are proposed and developed with features that include an hour of the day, solar irradiation, wind velocity, dynamic grid price, and system load. An hour-wise input database for the model development is generated from monthly average data and hour-wise daily curves with normally distributed standard deviations. A very significant Validation technique (K Fold cross validation technique) is explained. Correlation between Input and output variable using spearman’s correlation analysis using Heat maps. Followed by the Multiple Linear Regression based Training and testing of the Modified IEEE 14 and IEEE30 Bus systems for base load case, 10% and 20% load increment with the 5-fold cross validation is also presented. Comparative analysis is performed to find the best fit ML Model for our research.
1 January 2023 in International Journal of Renewable Energy Research
Digitizing the traditional electrical power grid and the transition of the grid operations to Smart Grid functionalities could yield very efficient results. Despite all the advantages, the smart grid networks pose a serious threat of cyber-attacks emerging at the various nodes of the system. The cyber threat models could vary from minimal effect on the system to even massive power outages disrupting the entire system. One of the vulnerable and crucial nodes of the smart grid where the security breaches can occur is the Advanced Metering Infrastructure component of the smart grid. Hence, it becomes essential for efficient security protocols in place, to secure the metering data originating from the consumer premises through smart meters. In this paper, we have explored the cryptographic encryption algorithms, which are most effective in securely transmitting data from smart meters to the utility centers and vice versa. In particular, using the approach of combining the strengths of asymmetric and asymmetric public key algorithms to provide hybrid functionalities are very efficient in Internet of Things (IoT) systems. Therefore, in this research work, we propose an enhanced hybrid security protocol with ARIA encryption algorithm and Rivest–Shamir–Adleman (RSA) key encryption algorithm with SHA256 hash digital signature for the secure transmission of metering data in smart grid networks. The results of this hybrid application in smart grids shows significant improvement in the defined performance metrics.
This paper introduces the design and development of an intelligent, ultraportable oxygen concentrator weighing around 5.5 kg with closed-loop automation for optimal oxygen delivery. The system is Pressure Swing Adsorption (PSA) technology-based with a MAX30100 sensor for continuous monitoring of peripheral oxygen saturation (SpO₂) to modulate oxygen flow in real-time based on patient needs. Oxygen flow rate is managed by a DC motor-driven mechanism, combined with a stepper motor, and backed by force-torque analysis. A Proportional-Integral-Derivative (PID) control algorithm is used to control compressor speed, dynamically adjusting to sensor inputs to maintain desired oxygen purity levels. System validation using a PO 80 Pulse Oximeter ensured accurate tracking of SpO₂ and heart rate. Experimental results indicate improved energy efficiency, low response time, and customized oxygen therapy and demonstrate the appropriateness of the system for clinical and portable applications. The compressor and flow regulation valve, driven by a DC motor and stepper motor, respectively, respond to the controller outputs, with torque and pressure feedback ensuring stable flow rate and enhancing system reliability. PID controller gains were optimized using the Ziegler-Nichols method and iterative refinement to achieve optimum settling time and overshoot, while ensuring overall system stability and patient safety. Statistical analysis was used to evaluate system performance and reliability. A one-way analysis of variance (ANOVA) was used to determine significant differences between the significant parameters SpO₂ levels, response time, flow rate, and energy consumption among three oxygen delivery modes: intelligent control, fixed flow, and manual titration. Follow-up pair-wise t-tests established specific group differences, of which confidence intervals provided estimates of measurement precision. The statistical technique offers strong evidence for the better performance of the intelligent control system.