SONAM M. PATEL

Dr. SONAM M. PATEL

Metallurgy Department, Dr. S. & S. S. Ghandhy College of Engineering & Technology, Surat, Surat, India
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2021 in Materials Research Express
Verified
Journal Article
Open access
PDF file
SONAM M. PATELSONAM M. PATEL
SONAM M. PATEL
MPMehul M Patel
Mehul M Patel
VRVandana J Rao
Vandana J Rao
Magnesium and its alloys are extremely susceptible to oxidation and fire due to their reactivity with oxygen. Therefore, special care should be taken while melting them. In this research, different types of fluxes were used to protect the molten magnesium from oxidation. These fluxes cover the molten magnesium surface and refine it. In this research, nine magnesium melting and refining fluxes were studied. Dow fluxes compositions were taken as a base to prepare five fluxes and another four fluxes were developed by varying the content of chlorides, fluorides, and oxide. The main purpose of this research is to increase the recovery of magnesium metal by melting in normal atmospheric conditions and develop a low-cost conventional melting practice. Decomposition behavior, mass change, and melting of these nine fluxes were studied by TG/DTA technique. After fusing, the surface morphology of these fluxes was studied by visual observation and scanning electron microscope. Magnesium was melted using these nine fluxes and for each flux, the weight loss of magnesium was calculated. From a thermal analysis study, it was confirmed that all the fluxes were fused before magnesium melting. Based on the flux layer which was generated during the melting and the weight loss analysis, flux 9 (250) was the best flux compared to other fluxes. The highest purity was obtained by using flux 2 with the highest tensile strength value.

7 July 2023 in Materials Today: Proceedings
Verified
Journal Article
Closed access
SONAM M. PATELSONAM M. PATEL
SONAM M. PATEL
VRVandana Rao
Vandana Rao

1 December 2022 in Engineering Research Express
Verified
Journal Article
Closed access
SONAM M. PATELSONAM M. PATEL
SONAM M. PATEL
VRVandana J Rao
Vandana J Rao
Previous research on Mg-Ni alloys focused on the mechanical characteristics and damping behaviour in the presence of Zn and rare Earth elements. There has not been much research on the Mg-Ni-Mn alloy’s microstructure, mechanical properties, and corrosion behaviour. The present research work fulfills this gap by concentrating on the microstructure, mechanical, and corrosion characteristics of Mg-Ni-Mn alloys. Here, different Mg-Ni-Mn alloys were developed by varying the nickel and manganese content. The microstructure of the developed alloys was studied using an optical microscope and scanning electron microscope. Ultimate tensile strength and microhardness of all alloys were performed on a tensometer (room temperature), and Vickers hardness tester respectively. The corrosion rate of Mg-Ni and Mg-Ni-Mn alloys was measured at 3.5 wt% NaCl solution by immersion test. The result shows that the nickel and manganese presence refine the grain size of magnesium. XRD analysis confirmed the presence of α -Mg and Mg 2 Ni phases in Mg-Ni alloys. Along with these phases, the Mn phase was observed in Mg-Ni-Mn alloys. Mechanical properties such as ultimate tensile strength and hardness of pure magnesium were increased in the presence of Ni and Mn. However, the presence of manganese in Mg-Ni alloy shows an adverse effect on corrosion behaviour. The corrosion rate of the Mg-Ni alloy was accelerated in the presence of manganese.


15 November 2014 in International Journal of Innovative Research in Science Engineering and Technology
Verified
Journal Article
Closed access
VRVandana Rao
Vandana Rao
SONAM M. PATELSONAM M. PATEL
SONAM M. PATEL
RSRajesh Sankaliya
Rajesh Sankaliya
JPJigesh Patel
Jigesh Patel
JLJatin Lad
Jatin Lad

15 August 2015 in International Journal of Innovative Research in Science Engineering and Technology
Verified
Journal Article
Closed access
SONAM M. PATELSONAM M. PATEL
SONAM M. PATEL