20 July 2017 in Catalysis Letters
1 January 2013 in Procedia Engineering
TGA studies of lignite have been carried out. Lignite sample from Gujarat, India have been non-isothermally pyrolyzed using thermogravimetric analyzer and kinetics of decomposition of lignite was studied by non-isothermal method. The sample was heated over a range of temperature from room temperature to 1000°C with seven different heating rates of 5, 7, 10, 15, 20, 30, 50°C min-1 and non- isothermal weight loss was recorded for all heating rates. The weight loss curve showed that pyrolysis of lignite took place mainly in the range of 200-500°C. Two non-isothermal methods, namely the direct Arrhenius plot method and the integral method were applied for determination of kinetic parameters-activation energy (Ea) and frequency factor (A). The activation energy obtained by the direct Arrhenius plot method ranged between 60kJ/mol to 92kJ/mol. While the result obtained by integral method shows lesser value of activation energy (28kJ/mol to 50kJ/mol)
23 July 2010 in Industrial & Engineering Chemistry Research
1 January 2002 in ISIJ International
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies
27 December 2024 in Biomass Conversion and Biorefinery
1 November 2021 in Materials Research Express
Magnesium and its alloys are extremely susceptible to oxidation and fire due to their reactivity with oxygen. Therefore, special care should be taken while melting them. In this research, different types of fluxes were used to protect the molten magnesium from oxidation. These fluxes cover the molten magnesium surface and refine it. In this research, nine magnesium melting and refining fluxes were studied. Dow fluxes compositions were taken as a base to prepare five fluxes and another four fluxes were developed by varying the content of chlorides, fluorides, and oxide. The main purpose of this research is to increase the recovery of magnesium metal by melting in normal atmospheric conditions and develop a low-cost conventional melting practice. Decomposition behavior, mass change, and melting of these nine fluxes were studied by TG/DTA technique. After fusing, the surface morphology of these fluxes was studied by visual observation and scanning electron microscope. Magnesium was melted using these nine fluxes and for each flux, the weight loss of magnesium was calculated. From a thermal analysis study, it was confirmed that all the fluxes were fused before magnesium melting. Based on the flux layer which was generated during the melting and the weight loss analysis, flux 9 (250) was the best flux compared to other fluxes. The highest purity was obtained by using flux 2 with the highest tensile strength value.