Yanfeng Ma

Dr. Yanfeng Ma


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2021 in IEEE Access
Verified
Journal Article
Open access
XSXun Suo
Xun Suo
SZShuqiang Zhao
Shuqiang Zhao
YMYanfeng Ma
Yanfeng Ma
LDLing Dong
Ling Dong
Vigorously developing new energy is an important measure to deal with the energy crisis and environmental degradation, but the volatility and randomness of its output have brought great challenges to the new energy consumption. In this paper, the maximum new energy consumption is taken as the objective function, and the power flow constraints, multi-energy source capacity constraints and electrical constraints are taken as the constraints. Based on the complex adaptive system theory, the minimum construction step size of new energy sources is taken as the agent for modeling, focusing on the coordination among multiple sources, adjusting the installed node position and capacities of various types of power sources to obtain the optimal layout of power sources for multi-energy power systems. Based on the actual meteorological and operational data of a regional power grid in Northwest China, the original power system is re-planned. The simulation results verify the effectiveness of the proposed planning method.

20 January 2006 in Chemistry of Materials
Verified
Journal Article
Closed access
NLNiu Li
Niu Li
YMYanfeng Ma
Yanfeng Ma
SXShouhe Xiang
Shouhe Xiang
NGNaijia Guan
Naijia Guan

10 February 2022 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
ZWZijian Wang
Zijian Wang
CCChengang Cui
Chengang Cui
YMYanfeng Ma
Yanfeng Ma
As energy storage elements in modular multilevel converter (MMC) sub-module of a unified power flow controller (UPFC), metallized film capacitors endure ac and dc superimposed voltages, which brings new challenges to insulation performance of the dielectric film. In this article, an experimental setup was created to investigate the breakdown characteristics of the dielectric film for sub-module capacitors. Factors which may affect breakdown strength under ac and dc superimposed voltages were studied experimentally. The results reveal that, as the dc voltage component increases in the range of 0-3200 V, the breakdown strength gradually increases by 16.36%; as the ac voltage component increases in the range of 0-1800 V, the breakdown strength slightly decreases by 3.52%; the breakdown strength is more affected by frequency as the ac voltage component increases and decreases with increasing frequency; as temperature increases from 20 °C to 95 °C, the breakdown strength substantially decreases by 31.12%; as the thickness of the film increases from 7 to 10 μm, the breakdown strength slightly increases by 6.32%. For capacitors in 500-kV UPFC, the dc voltage component is approximately 1600 V; the ac voltage component, whose peak-to-peak value is within 800 V, mainly contains power frequency and the second harmonic components. According to the experimental results, since the ac voltage component is small and the order of harmonic is low, the breakdown strength of capacitors in UPFC has little difference compared with that of the dc capacitors. This article can provide a reference for insulation design optimization of capacitors in UPFC.

24 November 2021 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
ZWZijian Wang
Zijian Wang
YLYingjie Lu
Yingjie Lu
YMYanfeng Ma
Yanfeng Ma
The metallized film capacitors in modular multilevel converter (MMC) submodules of unified power flow controller (UPFC) endure ac and dc superimposed voltage, which raises a new problem to the research of capacitor temperature rise. This article presents an experimental setup to perform the capacitor temperature rise experiment under ac and dc superimposed voltage. The effects of ac voltage, dc voltage component, and frequency on the temperature rise of metallized film capacitor are studied experimentally. The experimental results show that dc voltage has no effect on the temperature rise of the capacitor, and the temperature rise can be calculated using the ac voltage component and equivalent series resistance (ESR). According to the equivalent circuit model of the capacitor and experimental results, it can be considered that the equivalent resistance of conductor loss and the dielectric loss factor of the polypropylene film remain unchanged in the frequency range of 0-250 Hz. With the increase in frequency, the proportion of conductor loss power in capacitor increases significantly, and it should be considered in capacitor design. The research results can guide the design and selection of metallized film capacitors in MMC submodules of UPFC.

26 August 2022 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
ZWZijian Wang
Zijian Wang
CQCheng Qi
Cheng Qi
FYFei Yan
Fei Yan
YMYanfeng Ma
Yanfeng Ma
The surface flashover may occur at the clear edge of metallized films, affecting the insulation performance of metallized film capacitors (MFCs). In this article, an experimental setup was established to investigate the dc surface flashover characteristics of the metallized polypropylene film for MFCs. The effects of voltage setting, parallel capacitance, interlayer pressure, experiment temperature, and clear edge width on the flashover characteristics of metallized films were studied experimentally. The results reveal that, different voltage setting methods affect the surface flashover voltage, with a relatively stable disparity of 14.03%; parallel capacitance has little effect on the flashover characteristics in the range of 0–60 $\mu $ F; the surface flashover voltage and field strength are positively correlated with the interlayer pressure in the range of 50–800 kPa, and negatively correlated with the experiment temperature in the range of 30 $^{\circ}$ C–90 $^{\circ}$ C; as the clear edge width of the metallized film increases from 0.5 to 2.5 mm, the flashover field strength substantially decreases by 49.39% and gradually slows down to saturation. In terms of clear edge design, the width should be determined by the surface flashover voltage under the second voltage setting method; the effect of parallel capacitance on surface flashover can be ignored; measures should be taken to increase the interlayer pressure of outer films, such as increasing the turns of wrapped film outside; the clear edge width should be increased for MFCs operating at high temperature and can be selected according to the experimental data in this article.

16 March 2018 in Energies
Verified
Journal Article
Open access
PDF file
YMYanfeng Ma
Yanfeng Ma
ZLZijian Lin
Zijian Lin
RYRennan Yu
Rennan Yu
SZShuqiang Zhao
Shuqiang Zhao
A large scale of renewable energy employing grid connected electronic inverters fail to contribute inertia or damping to power systems, and, therefore, may bring negative effects to the stability of power system. As a solution, an advanced Virtual Synchronous Generator (VSG) control technology based on Hamilton approach is introduced in this paper firstly to support the frequency and enhance the suitability and robustness of the system. The charge and discharge process of power storage devices forms the virtual inertia and damping of VSG, and, therefore, limits on storage capacity may change the coefficients of VSG. To provide a method in keeping system output in an acceptable level with the capacity restriction in a transient period, an energy control algorithm is designed for VSG adaptive control. Finally, simulations are conducted in DIgSILENT to demonstrate the correctness of the algorithm. The demonstration shows: (1) the proposed control model aims at better system robustness and stability; and (2) the model performs in the environment closer to practical engineering by fitting the operation state of storage system.