In this chapter, we review the progress in MHD stability, disruptions and control in magnetic fusion research that has occurred over the past (more than) one and a half decades since the publication by Hender et al in 2007 on the same topic as part of the update of ITER Physics Basis. During this period, remarkable progress has been achieved in the understanding of the basic physics and overall control of MHD instabilities through a wide spectrum of dedicated experiments, theory and modeling. The sawtooth activities are probably today one of the best understood of MHD events and very robust control schemes have been developed for reliable operation of tokamaks through core heating. Similarly, significant improvements have been achieved in understanding and control of neoclassical tearing modes, resistive wall modes or locked modes and their control through ECCD or error field control. The field of disruption prediction through application of artificial intelligence, machine learning or deep learning methods, which had already started at the time of the 2007 review, has progressed significantly due to general progress in these fields and application of newer, more sophisticated algorithms. However, although remarkable progress has been achieved in the field of Disruptions, their understanding, prediction, possible avoidance and mitigation still remain probably the most active fields of R&D globally in this field. This is especially because reactor grade machines like ITER and DEMO will be much less tolerant in respect of disruptions and runaway currents, and their occurrences must be either avoided altogether or minimized to an acceptable value without causing any significant hindrance to robust machine operations. This review is intended to present a broad spectrum of the R&D that has occurred in this field in support of ITER, which will also be of immense significance for all future machines, especially reactors like DEMO.

Transient magneto-hydrodynamic (MHD) events like edge localized modes (ELMs) or disruptions are a concern for magnetic confinement fusion power plants. Research with the MHD code JOREK towards understanding control of such instabilities is reviewed here in a concise way to provide a complete overview, while we refer to the original publications for details. Experimental validation for unmitigated vertical displacement events progressed. The mechanism of vertical force mitigation by impurity injection was identified. Two-way eddy current coupling to CARIDDI was completed. Shattered pellet injection was simulated in JET, KSTAR, ASDEX Upgrade (AUG) and ITER. Benign runaway electron beam termination in JET and ITER was studied. Coupling of kinetic REs to the MHD is ongoing and a virtual RE synchrotron radiation diagnostic was developed. Regarding pedestal physics, regimes devoid of large ELMs in AUG were simulated and predictive JT60-SA simulations are ongoing. For ELM suppression by resonant magnetic perturbations (RMPs), AUG, ITER and EAST simulations were performed. A free boundary RMP model was validated against experiments. Evidence for penetrated magnetic islands at the pedestal top based on AUG experiments and simulations was found. Simulations of the naturally ELM-free quiescent H-mode in AUG and HL-3 show external kink mode formation prevents pedestal build-up towards an ELM within windows of the edge safety factor. With kinetic neutral particles, high field side high density formation in ITER was simulated and with kinetic impurities, tungsten transport in AUG RMP plasmas was studied. To capture turbulent transport, electro-static full-f particle in cell models for ion temperature gradient and trapped electron modes were established and benchmarked. Application to RMP plasmas shows enhanced turbulence in comparison to unperturbed states. Energetic particle interactions with MHD were studied. Flux pumping that prevents the safety factor on axis from dropping below unity was simulated. First non-linear stellarator applications include current relaxation in l = 2 stellarators, while verification for advanced stellarators progresses.

The self-consistent electromagnetic integration of tokamak plasma magnetohydrodynamic (MHD) models with external conductors is considered in this manuscript. We integrate the extended MHD code JOREK and the eddy current code CARIDDI, via a scheme based on the virtual casing principle enabling two-way coupled fully implicit simulations. The robustness of this new integrated tool is validated against JOREK-STARWALL and CarMa0NL simulations for vertical displacement events in a simplified ASDEX Upgrade-like geometry and for n = 1 tearing modes in a circular high-aspect-ratio tokamak. The impact of 3D wall structures on the plasma evolution is highlighted introducing ports at different locations of a simplified axisymmetric wall and characterizing its effect on the plasma evolution. In addition to realistically capturing the 3D interactions between plasma and wall structures, the coupled codes will allow in the future 1:1 comparisons to experiments using virtual magnetic diagnostics that capture screening effects accurately.

Electromagnetic forces generated during hard-to-predict transient events, represent a serious constraint for the operation and design of tokamaks. A sudden loss of plasma stability, triggering plasma thermal and current quenches, leads to the induction of eddy currents in the conducting structures surrounding the plasma column. Interaction of these currents with the magnetic field is responsible for a j × B local force that might compromise the integrity of the device. Here we evaluate the effect of poloidal currents induced in the wall on the local and global forces. To test the earlier analytical predictions (Pustovitov and Kiramov 2018 Plasma Phys. Controlled Fusion 60 , 045011), we consider a circular tokamak by the numerical tool CarMa0NL (Villone et al 2013 Plasma Phys. Controlled Fusion 55 , 095008). The results confirm the necessity of incorporating the poloidal currents into the task, as these strongly affect the local stress distribution and the global radial force. The overall agreement between analytical and numerical computation is an additional evidence that CarMa0NL is a sound tool for the prediction of disruption forces in tokamaks. At the same time, the simulation conditions in which the agreement is less satisfactory allow to identify which are the most restrictive assumptions of the analytical model, pointing out the way for future theoretical work.

COMPASS addressed several physical processes that may explain the behaviour of important phenomena. This paper presents results related to the main fields of COMPASS research obtained in the recent two years, including studies of turbulence, L–H transition, plasma material interaction, runaway electron, and disruption physics: Tomographic reconstruction of the edge/SOL turbulence observed by a fast visible camera allowed to visualize turbulent structures without perturbing the plasma. Dependence of the power threshold on the X-point height was studied and related role of radial electric field in the edge/SOL plasma was identified. The effect of high-field-side error fields on the L–H transition was investigated in order to assess the influence of the central solenoid misalignment and the possibility to compensate these error fields by low-field-side coils. Results of fast measurements of electron temperature during ELMs show the ELM peak values at the divertor are around 80% of the initial temperature at the pedestal. Liquid metals were used for the first time as plasma facing material in ELMy H-mode in the tokamak divertor. Good power handling capability was observed for heat fluxes up to 12 MW m⁻² and no direct droplet ejection was observed. Partial detachment regime was achieved by impurity seeding in the divertor. The evolution of the heat flux footprint at the outer target was studied. Runaway electrons were studied using new unique systems—impact calorimetry, carbon pellet injection technique, wide variety of magnetic perturbations. Radial feedback control was imposed on the beam. Forces during plasma disruptions were monitored by a number of new diagnostics for vacuum vessel (VV) motion in order to contribute to the scaling laws of sideways disruption forces for ITER. Current flows towards the divertor tiles, incl. possible short-circuiting through PFCs, were investigated during the VDE experiments. The results support ATEC model and improve understanding of disruption loads.