Camila Botarro Moura

Mrs. Camila Botarro Moura


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 May 2026 in Minerals
Verified
Journal Article
Open access
PDF file
RFRafael Alves de Souza Felipe
Rafael Alves de Souza Felipe
CMCamila Botarro Moura
Camila Botarro Moura
CFCarlos Antônio Hoffman Gatti Filho
Carlos Antônio Hoffman Gatti Filho
HDHomero Delboni
Homero Delboni
The management of fine bauxite tailings, rich in clay minerals, represents an environmental and operational challenge for the aluminum industry. This study (Part 1) presents a pilot-scale investigation into the dewatering of these ultrafine tailings using a decanter centrifuge, 0.62 m in diameter, as an alternative to conventional wet storage. Tests were conducted at three bowl speeds, 1600 rpm, 1700 rpm, and 1800 rpm, corresponding to G-forces of 888, 1003, and 1124 G. The feed slurry behaved as a non-Newtonian, yield-pseudoplastic fluid, as confirmed by rheology tests. A comprehensive mass balance and performance analysis were conducted. The results demonstrated a monotonic improvement in key performance metrics with increasing bowl speed. Accordingly, increasing the G-force from 888 G to 1124 G improved the final cake solid content from 66.3% to 71.5% (by weight), together with an increase in the average solid recovery from 40.0% to 56.2%. Partition curve analysis revealed the primary limitation: while recovery of particles coarser than 20 µm was very high (>98%), recovery of particles finer than 20 µm remained low, ranging from 22.0% to 35.1%. Partition curve analysis using the Whiten model identified a mechanical cut size (d50c) ranging from 9.72 µm to 12.0 µm. Hydraulic bypass increased from 8.35% to 14.9% with increasing bowl speed, indicating a significant non-size-selective component of separation. Rheological analysis further showed that the apparent viscosity at 100 s−1 decreased from 0.332 to 0.111 Pa·s across the tested conditions, confirming enhanced slurry mobility and its contribution to increased ultrafine bypass. While overall solid recovery reached 56.2% at 1124 G, the mechanical capture of the ultrafine fraction (<5 µm) remains the primary bottleneck for industrial viability. It is concluded that while the decanter centrifuge is mechanically viable for producing a high-solid cake, the limited recovery of fines would create an unsustainable circulating load in an industrial plant. These results demonstrate that G-force alone, within the tested range, is insufficient to manage these tailings and provide the basis for the mathematical modeling required to design the process, as described in Part 2 of this investigation.

12 November 2026 in Minerals
Verified
Journal Article
Open access
PDF file
RFRafael Alves de Souza Felipe
Rafael Alves de Souza Felipe
CMCamila Botarro Moura
Camila Botarro Moura
HDHomero Delboni
Homero Delboni
Recent advances in tailings management practices and technologies have expanded the range of available solutions and equipment. Although decanter centrifuges are well established in other industrial applications, their use across the mining sector has not yet been systematically reviewed. This systematic review, conducted following PRISMA 2020 (Scopus search to June 2026, verified in Web of Science and complemented by citation searching; retrospectively registered on OSF), synthesizes 26 studies (20 primary studies and six reviews) on decanter centrifuges in mineral processing and tailings management, published between 2001 and 2026. Reporting quality was appraised against four criteria, and the evidence was synthesized narratively. Among the primary studies, research efforts primarily address coal tailings (35%) and calcium carbonate as a model suspension for numerical validation (20%), alongside kaolin, oil sands tailings, and bauxite tailings (10% each). Bowl speed, differential speed, pool depth, and solids loading are the most investigated parameters, while the capture of ultrafine particles and the dewatering of clay-rich tailings remain the main bottlenecks. Experimental studies were conducted at the laboratory or pilot scale; industrial-scale data appeared only as validation of process models, and the included literature reports no full-scale performance data. The technology is promising for the feeds tested, but its performance at full scale and for other commodities remains to be documented.

27 October 2026 in Minerals
Verified
Journal Article
Open access
PDF file
RFRafael Alves de Souza Felipe
Rafael Alves de Souza Felipe
CMCamila Botarro Moura
Camila Botarro Moura
HDHomero Delboni
Homero Delboni
Part 1 of this study identified the recovery of ultrafine particles as the main bottleneck in the decanter centrifuge dewatering of bauxite tailings. This study (Part 2) develops a semi-empirical framework that reconstructs the Whiten partition parameters (corrected cut size d50c, sharpness α, and hydraulic bypass Rf) and the cake solids content from bench-scale characterization, operating and equipment parameters, and coefficients calibrated on the pilot campaign. The d50c is estimated with Ambler’s Σ-theory, using an effective viscosity from a batch sedimentation test and a Σ-efficiency factor (ε = 0.0945) calibrated on the pilot cut sizes, which are reproduced with a mean absolute error of 0.33 µm (leave-one-condition-out errors from −4.5% to +7.6%). Hydraulic bypass and cake solids content are linear functions of centrifugal acceleration with offsets fixed by sedimentation test quantities, whereas sharpness is fully calibrated. The calibrated parameters reproduce the pilot fine-fraction (<20 µm) recovery within −0.3 to +2.1 percentage points, an internal consistency check rather than an independent validation. The recovery estimate is dominated by ε, whereas replacing the calibrated sharpness intercept by twice the feed PSD imperfection changes it by at most 0.5 percentage points. These results are combined into an early assessment workflow in which ε is evaluated through scenarios anchored on the campaign value, yielding a recovery range—transfer to other materials or equipment requires validation.