Small-signal instability issues will occur in the DC microgrid when the high-frequency oscillation peaks of the voltage closed-loop transfer function are not effectively suppressed. To ensure the small-signal stability of DC microgrids, the concept of a small-signal stability domain for voltage control parameters is proposed. Based on the voltage closed-loop transfer function, a small-signal-stability-domain-solving algorithm is proposed. With this stability domain, the impact of voltage-proportional coefficient and voltage-integral coefficient on oscillation frequency (or damping factor) is quantitatively analyzed. In addition, the influence of current control parameters on the small-signal stability boundary is also analyzed. With the introduction of this stability domain, a design method for voltage control parameters has been proposed. The voltage control parameters, which are quantitatively designed by this method, are able to maintain the small-signal stability of the system. Finally, based on the RT-BOX hardware-in-the-loop experimental platform, a switching model for a typical DC microgrid is established. Additionally, the effectiveness of the proposed algorithm and designed control parameters is verified by multiple sets of experimental results.
This article evaluates the connectivity with energy sharing in low-voltage distribution areas. Indicators like wind-solar complementing effectiveness, source-load energy sharing possibility, or transformer capacity interconnection measurements are part of the assessment index framework for interconnection capacity that is established after an analysis of the features of linked scenarios. Radial and inflexible, conventional distribution systems can’t handle bidirectional power flow, fluctuating demand, or grid disruptions. Using real-world examples, we can see that the suggested strategy improves power supply efficiency across zones and increases the usage of distributed energy resources, proving the method’s validity. With the help of Flexible Interconnection Devices (FIDs), MV/LV networks may be reconfigured, power quality is improved, DERs are supported, and reliability is increased. With so many distributed PVs connected to distribution substations, managing low- and medium-voltage distribution networks is a real challenge. One novel kind of power gadget that permits adaptable connections between distribution substation segments is the soft open point (SOP). This article presents learning algorithm for low and medium voltage networks for power optimization, which takes into consideration the dynamic connectivity of different areas of substation. The next stage is to construct a multi-agent deep reinforcement learning (DRL) suitable for low and medium voltage distribution networks using Deep Q Network (DQN) model in DRL. The low and medium voltage distribution network employs flexible interconnection device for power loss reduction. Finally, the case studies show that the proposed approach has a good operating strategy for distribution networks with medium and low voltages, and it may lessen voltage fluctuations caused by high PV integration.