This study reports the effect of the magnetization process on the chemical and electrical properties of tap water (TW). Also, a step in the direction of gaining a better understanding of the influence of magnetizing technique on the physicochemical properties of water exposed to several intensities of magnetic field (MF). The TW sample used in this study passed through four intensities of the MF (2,000, 4,000, 6,000, and 8,000 G) under the same conditions of temperature and pressure. Magnetized water was tested and evaluated for physical and chemical qualities after being cycled through a magnetization device for 6 h. Following the increase in the intensities of the MF, the alteration in water properties has been depicted. The results showed increase in the pH value, electrical conductivity, and some of the chemical properties. The optimum change in the properties of water were obtained when the intensity of MF reached 8,000 G. However, to assess the obtained modification of water quality from the magnetization process, the results are compared with the guideline standards of the World Health Organization. To reduce the treatment costs and increase the long-term viability of the process, the study findings suggested a strategy of water magnetization as an effective treatment technology with reduction in energy and material usage (green technology).
26 December 2025 in International Journal of Geosynthetics and Ground Engineering
To control swelling of soil it is necessary to possess a wide knowledge base in order to prevent damage to the structure constructed on such soils. Control of swelling is a major concern and soil improvement methods have attracted many investigations on clayey soils. Various techniques have been designed considering different aspects; economy, soil properties, time of application, availability of materials, environment among others. This study presents a wide review about definition and stabilization of swelling soils using traditional method such as (hydrophobants, binder, polymer, cement, sand, fly ash, lime and feldspar metal) and green technology method such as (saline water and magnetic water) to mitigate the swelling potential. Significant emphasis is being placed on innovative methods like saline solutions and magnetic water, which enhance the bonding between soil particles and improve soil strength. These eco-friendly, low-cost green techniques offer a more sustainable alternative to conventional methods.
The present and future prospects of infrastructural development inevitably point towards underground structures. Tunnelling plays an important role in underground infrastructure projects, whose complexity increases with jointed or fractured rock. Discontinuities in rocks is common, such as joints, faults, folds, infilling weak materials, or other types of anisotropy. These discontinuities lead to uncertainties and failures in underground excavations. The most common type of discontinuity in the field is joints, which significantly affect the stress and deformation behaviour of the rock mass. Joints mostly occur as joint sets, which are usually parallel and equally spaced, and can also occur in multiple sets. This research simulated a 3D numerical model to investigate the effect of tunnel advancement on a raft foundation constructed on an anisotropic rock mass. Specifically, it analysed the deformation and stress responses of raft foundations and tunnels under different joint conditions during tunnelling. Moreover, the responses under different joint sets were compared, and the magnitude of the settlement was systematically evaluated. Results demonstrated that the presence and orientation of joints, particularly their inclination, significantly affect stress response during excavation. Active stress conditions occurred at the top and bottom of the tunnel, whereas passive conditions occurred on the lateral sides. In addition, the influence of tunnel advancement on stress distribution vanished at X/D = ≈ 3.5. These findings indicate that the structural orientation of an anisotropic rock layer significantly influences mat foundation behaviour. The most critical scenario occurred at a dip angle of 90°, where the maximum settlement reached 26% of the total raft foundation settlement.